Abstract With the goal of preventing more hip fractures, a next generation of the VirtuOst Biomechanical Computed Tomography (BCT) test was developed that integrates measurements from a clinical CT scan related to fall risk, impact force, and femoral strength, the three main determinants of hip fracture. Here, we introduce the test and validate it against BMD and FRAX. Our source population from a large healthcare system comprised of 341364 patients (≥65 yr) with an abdominal-pelvic CT during care. Using data from 3035 patients (1790 with hip fracture), we developed a “BCT Risk Score” (range: 0-100) having input risk factors of age, femoral strength, ratio of trabecular/cortical BMD, muscle area, intramuscular fat, FN volume, hip width, and posterior fat thickness. In a geographically distinct set of 2124 patients (1293 with hip fracture), we then compared the BCT Risk Score against a DXA-equivalent hip BMD T-score (lowest hip value, measured from the CT scan by VirtuOst) and FRAX hip fracture risk (with BMD but without parental fracture history) for predicting a first incident hip fracture within 5 yr. For the women, the c-statistic for predicting fracture was higher for BCT (0.89, 95% CI: 0.87-0.90) than for BMD (0.81, 0.79-0.84) or FRAX (0.85, 0.83-0.87). Using binary thresholds to identify high-risk patients, sensitivity for BCT (Risk Score ≥ 75) was higher than for BMD (T-score ≤ −2.5) and FRAX (hip risk ≥ 3.0%): 81.4% vs 47.8% vs 75.9%, respectively; positive predictive values confirmed comparable high-risk status (BCT 13.6% vs BMD 15.3% vs FRAX 12.7%). Similar trends were observed for the men, 2-yr outcomes, and identifying very-high-risk patients. We conclude that, compared to both BMD and FRAX, the integrative BCT test better predicted hip fracture and its high sensitivity should improve fracture prevention.
Osteoporosis treatment prevents hip fracture similarly in both sexes: the FOCUS observational study
Abstract Randomized trials have not been performed, and may never be, to determine if osteoporosis treatment prevents hip fracture in men. Addressing that evidence gap, we analyzed data from an observational study of new hip fractures in a large integrated healthcare system to compare the reduction in hip fractures associated with standard-of-care osteoporosis treatment in men versus women. Sampling from 271,389 patients aged ≥ 65 who had a hip-containing CT scan during care between 2005 and 2018, we selected all who subsequently had a first hip fracture (cases) after the CT scan (start of observation) and a sex-matched equal number of randomly selected patients. From those, we analyzed all who tested positive for osteoporosis (DXA-equivalent hip BMD T-score ≤ −2.5, measured from the CT scan using VirtuOst). We defined “treated” as at least six months of any osteoporosis medication by prescription fill data during follow-up; “not-treated” was no prescription fill. Sex-specific odds ratios of hip fracture for treated vs not-treated patients were calculated by logistic regression; adjustments included age, BMD T-score, BMD-treatment interaction, BMD, race/ethnicity, and seven baseline clinical risk factors. At two-year follow-up, 33.9% of the women (750/2,211 patients) and 24.0% of the men (175/728 patients) were treated primarily with alendronate; 51.3% and 66.3%, respectively, were not-treated; and 721 and 269, respectively, had a first hip fracture since the CT scan. Odds ratio of hip fracture for treated vs not-treated was 0.26 (95% confidence interval: 0.21–0.33) for women and 0.21 (0.13–0.34) for men; the ratio of these odds ratios (men:women) was 0.81 (0.47–1.37), indicating no significant sex effect. Various sensitivity and stratified analyses confirmed these trends, including results at five-year follow-up. Given these results and considering the relevant literature, we conclude that osteoporosis treatment prevents hip fracture similarly in both sexes.
Triple‐Phase Computed Tomography May Replace Dual‐Energy X‐ray Absorptiometry Scan for Evaluation of Osteoporosis in Liver Transplant Candidates
Assessment of bone density is an important part of liver transplantation (LT) evaluation for early identification and treatment of osteoporosis. Dual‐energy X‐ray absorptiometry (DXA) is currently the standard clinical test for osteoporosis; however, it may contribute to the appointment burden on LT candidates during the cumbersome evaluation process, and there are limitations affecting its accuracy. In this study, we evaluate the utility of biomechanical analysis of vertebral images obtained during dual‐energy abdominal triple‐phase computed tomography (TPCT) in diagnosing osteoporosis among LT candidates. We retrospectively reviewed cases evaluated for LT between January 2017 and March 2018. All patients who underwent TPCT within 3 months of DXA were included. The biomechanical computed tomography (BCT) analysis was performed at a centralized laboratory (O.N. Diagnostics, Berkeley, CA) by 2 trained analysts blinded to the DXA data. DXA‐based osteoporosis was defined as a T score ≤−2.5 at the hip or spine. BCT‐based osteoporosis was defined as vertebral strength ≤4500 N for women or ≤6500 N for men or trabecular volumetric bone mineral density ≤80 mg/cm3. Comparative data were available for 91 patients who had complete data for both DXA and BCT: 31 women and 60 men, age 54 ± 11 years (mean ± standard deviation), mean body mass index 28 ± 6 kg/m2. Using DXA as the clinical reference, sensitivity of BCT to detect DXA‐defined osteoporosis was 83.3% (20/24 patients) and negative predictive value was 91.7%; specificity and positive predictive value were 65.7% and 46.5%, respectively. BCT analysis of vertebral images on triple‐phase computed tomography, routinely obtained during transplant evaluation, can reliably rule out osteoporosis in LT candidates. Patients with suspicion of osteoporosis on TPCT may need further evaluation by DXA.
Comparison of Vertebral and Femoral Strength Between White and Asian Adults Using Finite Element Analysis of Computed Tomography Scans
Study Design: Narrative review. Objective: This article seeks to provide a narrative review regarding the ability of opportunistic information available from computed tomography (CT) scans to guide decisions in spine surgery related to patient bone quality. Methods: A review of the literature (limited to human and English language) was performed via PubMed and Google Scholar using the search terms; “osteoporosis” AND “opportunistic” AND “computed tomography” AND “spine surgery.” The titles and then abstracts of all identified citations were reviewed for inclusion by 2 of the authors (MS, BAF). Relevant articles were then studied in full text. Results: A review of the literature found 25 articles that were selected for inclusion in this narrative review. These articles were broadly divided into 4 subcategories: (1) opportunistic CT (oCT) and osteoporosis detection, (2) oCT data and the quality of screw fixation, (3) utilization of Hounsfield units to assess clinical and/or radiographic outcomes following spine fusion, and (4) virtual stress testing in spine surgery. Conclusion: The literature on oCT, as well as associated virtual stress-testing techniques, demonstrate the potential to enhance spine surgery outcomes by preoperatively identifying at-risk patients in need of bone health optimization and informing best techniques for performing spinal fusion surgery on patients with diminished bone quality. While our narrative summary of the limited literature to date suggests a promising future for oCT data, significant additional research and/or radiographic workflow standardization is needed to validate these methods for clinical use.
Findings of CT-Derived Bone Strength Assessment in Inflammatory Bowel Disease Patients Undergoing CT Enterography in Clinical Practice
Hip and spine strength effects of adding versus switching to teriparatide in postmenopausal women with osteoporosis treated with prior alendronate or raloxifene
ABSTRACT Many postmenopausal women treated with teriparatide for osteoporosis have previously received antiresorptive therapy. In women treated with alendronate (ALN) or raloxifene (RLX), adding versus switching to teriparatide produced different responses in areal bone mineral density (aBMD) and biochemistry; the effects of these approaches on volumetric BMD (vBMD) and bone strength are unknown. In this study, postmenopausal women with osteoporosis receiving ALN 70 mg/week (n = 91) or RLX 60 mg/day (n = 77) for ≥18 months were randomly assigned to add or switch to teriparatide 20 µg/day. Quantitative computed tomography scans were performed at baseline, 6 months, and 18 months to assess changes in vBMD; strength was estimated by nonlinear finite element analysis. A statistical plan specifying analyses was approved before assessments were completed. At the spine, median vBMD and strength increased from baseline in all groups (13.2% to 17.5%, p < 0.01); there were no significant differences between the Add and Switch groups. In the RLX stratum, hip vBMD and strength increased at 6 and 18 months in the Add group but only at 18 months in the Switch group (Strength, Month 18: 2.7% Add group, p < 0.01 and 3.4% Switch group, p < 0.05). In the ALN stratum, hip vBMD increased in the Add but not in the Switch group (0.9% versus –0.5% at 6 months and 2.2% versus 0.0% at 18 months, both p ≤ 0.004 group difference). At 18 months, hip strength increased in the Add group (2.7%, p < 0.01) but not in the Switch group (0%); however, the difference between groups was not significant (p = 0.076). Adding or switching to teriparatide conferred similar benefits on spine strength in postmenopausal women with osteoporosis pretreated with ALN or RLX. Increases in hip strength were more variable. In RLX-treated women, strength increased more quickly in the Add group; in ALN-treated women, a significant increase in strength compared with baseline was seen only in the Add group.
Association of hip strength estimates by finite-element analysis with fractures in women and men