Zhang, Yu Shrike

Abstract 3D printing, also known as additive manufacturing, holds immense potential for rapid prototyping and customized production of functional health‐related devices. With advancements in polymer chemistry and biomedical engineering, polymeric biomaterials have become integral to 3D‐printed biomedical applications. However, there still exists a bottleneck in the compatibility of polymeric biomaterials with different 3D printing methods, as well as intrinsic challenges such as limited printing resolution and rates. Therefore, this review aims to introduce the current state‐of‐the‐art in 3D‐printed functional polymeric health‐related devices. It begins with an overview of the landscape of 3D printing techniques, followed by an examination of commonly used polymeric biomaterials. Subsequently, examples of 3D‐printed biomedical devices are provided and classified into categories such as biosensors, bioactuators, soft robotics, energy storage systems, self‐powered devices, and data science in bioplotting. The emphasis is on exploring the current capabilities of 3D printing in manufacturing polymeric biomaterials into desired geometries that facilitate device functionality and studying the reasons for material choice. Finally, an outlook with challenges and possible improvements in the near future is presented, projecting the contribution of general 3D printing and polymeric biomaterials in the field of healthcare.

As a treatment for the widely spread cardiovascular diseases (CVD), bypass vascular grafts have room for improvement in terms of mechanical property match with native arteries. A 3D‐printed nozzle is presented, featuring unique internal structures, to extrude artificial vascular grafts with a flower‐mimicking geometry. The multilayer‐structured graft wall allows the inner and outer layers to interfere sequentially during lateral expansion, replicating the nonlinear elasticity of native vessels. Both experiment and simulation results verify the necessity and benefit of the flower‐mimicking structure in obtaining the self‐toughening behavior. The gelation study of natural polymers and the utilization of sacrificial phase enables the smooth extrusion of the multiphase conduit, where computer‐assisted image analysis is employed to quantify manufacturing fidelity. The cell viability tests demonstrate the cytocompatibility of the gelatin methacryloyl (GelMA)/sodium alginate grafts, suggesting potential for further clinical research with further developments. This study presents a feasible approach for fabricating bypass vascular grafts and inspires future treatments for CVD.

Abstract INTRODUCTION Lung cancer is the most common tumor to metastasize to the brain, as 40% of patients develop brain metastasis (BM). Once diagnosed, survival is only 6.5-10 months. A potential target to prevent BM is circulating tumor cells (CTCs). The mechanisms that mediate a CTCs adaptation to the harsh environment of circulation and BM have not been elucidated. We have demonstrated that primary lung cancer cells (LCCs) subjected to circulation have increased migration across brain endothelial cell monolayers, increased side population, and decrease survival in rodents when injected intracardially vs plated controls. METHODS We engineered a microfluidic device capable of subjecting tumor cells to prolonged circulatory shear stress (CSS) that allows the isolation/modeling of CTC-like cells. Primary LCCs (A549, H1563) were subjected to circulation, suspension, or plated (2D) for 72h as controls. At this time point, LCCs were collected, and total mRNA was extracted. Samples were submitted for RNA sequencing. Weighted gene co-expression network analysis (WCGNA) and Ingenuity Pathway Analysis were performed. (FC >2 and p-value <0.05). RESULTS Transcriptomic analysis indicates that cells subjected to CSS activate specific gene networks involved in cell survival, migration, invasion, adhesion of tumor cells, and cytoskeletal reorganization (z-score: >2, p-value: 0.05). Canonical pathways in CTCs included ILK-signaling and Xenobiotic Metabolism. LCCs exposed to CSS had increased expression of multidrug resistance pumps ABCC2, ABCF2 (P:<0.001), and side population on flow cytometry (P: <0.05). The top differentially expressed genes in CTC-like cells (MMP1, ANGPTL4, and CEMIP) were involved in the invasion, angiogenesis, and pre-metastatic niche (PMN) formation of BM. CONCLUSION LCCs that survive CSS have increased expression of genes associated with migration, invasion, and chemoresistance compared to 2D controls. Targeting genes in CTCs that mediate survival and preparation of the PMN may be useful in preventing BM.

COVID-19 is a devastating respiratory and inflammatory illness caused by a new coronavirus that is rapidly spreading throughout the human population. Over the past 12 months, severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), the virus responsible for COVID-19, has already infected over 160 million (>20% located in United States) and killed more than 3.3 million people around the world (>20% deaths in USA). As we face one of the most challenging times in our recent history, there is an urgent need to identify drug candidates that can attack SARS-CoV-2 on multiple fronts. We have therefore initiated a computational dynamics drug pipeline using molecular modeling, structure simulation, docking and machine learning models to predict the inhibitory activity of several million compounds against two essential SARS-CoV-2 viral proteins and their host protein interactors—S/Ace2, Tmprss2, Cathepsins L and K, and Mpro—to prevent binding, membrane fusion and replication of the virus, respectively. All together, we generated an ensemble of structural conformations that increase high-quality docking outcomes to screen over >6 million compounds including all FDA-approved drugs, drugs under clinical trial (>3000) and an additional >30 million selected chemotypes from fragment libraries. Our results yielded an initial set of 350 high-value compounds from both new and FDA-approved compounds that can now be tested experimentally in appropriate biological model systems. We anticipate that our results will initiate screening campaigns and accelerate the discovery of COVID-19 treatments.

Abstract Patients with primary cancers often develop delayed brain metastases. One of the most common cancer types and sources of brain metastasis is lung cancer. For metastasis from lung cancer the 3-year survival is < 5%. Cancer cells in circulation are responsible for metastatic spread. The mechanical microenvironment plays an important role in cancer cells behavior. When cancer cells reach the bloodstream they are exposed to hemodynamic shear stress. It has been shown that most of the circulating tumor cells die once they reach the bloodstream, but the biology of the survival cells is poorly understood. We designed a microfluidics system that simulated the mechanical stress in the human circulating system such as turbulence, change in pressure (0.4-15dyn/cm2) and flow rate (1.06–106.1mm/s). Lung adenocarcinoma cells (A549) were put into circulation and collected after 72 hours. It was found that, 1.4±0.3% of the cells survived, and viability was evaluated by LDH and calcein. CD133, SOX2, and NANOG were downregulated and EMT genes were upregulated in the circulating cancer cells (CCCs) compared with cells in static-suspension or 2D. After re-seeding in 2D, CCCs overexpressed CD133. Female athymic nude rats (6-8weeks,n=16) received intracardiac injections of CCCs or 2D cells (GFP-LUC lentivirus traduced). Bioluminescence imaging was performed every week; the survival in of the CCCs group was lower than the 2D group. One-way ANOVA test was used to analyze survival and gene expression. Survival data was plotted on a Kaplan-Meier curve and compared using the Mantel-Cox logrank test, p=< 0.05. We have isolated a cellular subpopulation of lung adenocarcinoma with high resistance to hemodynamic shear stress that shows a higher metastatic capacity and genetic plasticity compared with cells growing in suspension or 2D. Targeting these cells would potentially allow us to develop personalized treatments to help to stop metastatic spread and improve actual therapeutical strategies.

Cancer tissue engineering has remained challenging due to the limitations of the conventional biofabrication techniques to model the complex tumor microenvironment. Here, the utilization of a sacrificial bioprinting strategy is reported to generate the biomimetic mammary duct‐like structure within a hydrogel matrix, which is further populated with breast cancer cells, to model the genesis of ductal carcinoma and its subsequent outward invasion. This bioprinted mammary ductal carcinoma model provides a proof‐of‐concept demonstration of the value of using the sacrificial bioprinting technique for engineering biologically relevant cancer models, which may be possibly extended to other cancer types where duct‐like structures are involved.

AbstractBiodegradable drug‐eluting stents (DESs) are used today to treat atherosclerotic arteries and as vehicles to deliver inhibitors to suppress restenosis, with potential applications also in localized cancer therapy. Here the development of a series of drug‐eluting poly(glycerol sebacate) (PGS) coils that may find possible use as DESs is reported. PGS is a tough, biodegradable, and biocompatible elastomer that has adjustable mechanical properties thanks to careful control of the fabrication process. Specifically, 3D PGS coils featuring superior mechanical and fracture‐resistance properties are fabricated. The surface erosion profile of PGS is designed to further reduce the risk of fragmentation and non‐target embolization during the degradation process. A dual‐encapsulation mechanism is applied, first poly(ε‐caprolactone) microparticles loaded with an anticancer drug Doxorubicin followed by dispersion of these microparticles in the PGS coils, to prolong the release of drug molecules from the interior. Systematic evaluations of the mechanical properties of the PGS coils and their drug release behaviors are conducted. It is anticipated that, these PGS coils may enable minimally invasive delivery using standard endovascular catheters, for achieving localized and sustained release of chemotherapy to tumors, as well as conventional applications in treating vascular disorders.