Ueki, Yasuhito

Abstract Brain arteriovenous malformations (AVMs) result from abnormal growth of vascular structures. AVMs pose a significant rupture risk, and its treatment is challenging due to the complex hemodynamics within the tangled nidus. Currently, investigating AVM hemodynamics remains a challenge due to the low resolution of clinical imaging modalities. In this study, a high-fidelity Computational Fluid Dynamics (CFD) simulation of a brain AVM from a KRAS-mutated mouse model is developed from micro-CT images. Brain AVMs were induced in mice through systemic delivery of AAV-BR1-CAG vector encoding KRASG12V-GFP transgene to cerebral endothelial cells. High-resolution microCT imaging at 6.551 𝜇𝑚 pixel size captured the complex vascular anatomy. The cerebral arteries were reconstructed using the 3D Slicer and Blender software. The curvilinear immersed boundary (CURVIB) method was employed with approximately 65 million grid points and spatial resolution of 0.7−2.3 𝜇𝑚. Our preliminary results reveal heterogeneous flow distribution through the nidus, with blood channeling through two primary pathways. The extremely low Reynolds number (0.038) indicates viscous-dominated flow characteristic of microcirculation. Our work presents the first high-resolution CFD simulation of brain AVM in the literature, providing a foundation for investigating flow-mediated vascular remodeling, rupture risk assessment, and therapeutic intervention planning in future.

Background Animal models are essential for evaluating endovascular device safety and efficacy. Rats offer advantages, such as genetic manipulability, lower cost, and shorter healing and breeding cycles, compared to large animals. These features support studying aneurysm healing mechanisms and enable high-throughput testing. We developed an optimal rat aneurysm model for device evaluation. Methods Saccular aneurysms were created at the origins of the left renal artery (LRA) with acetylsalicylic acid (ASA) (LRA/ASA group, n = 7); the right common iliac artery (RCIA) with ASA alone (RCIA/ASA group, n = 6) or ASA plus clopidogrel (CLP) (RCIA/ASA + CLP group, n = 7); and the left common iliac artery (LCIA) with ASA + CLP (LCIA/ASA + CLP group, n = 7). The origins of these arteries were surgically exposed. During temporary ligation of the vessel origin, the vessel was bisected and endoluminal elastase was incubated in the proximal stump for 10 min, followed by release of the proximal ligation and permanent ligation of the stump. Angiographical and histological analysis were performed 4 weeks post-procedure. Results Follow-up digital subtraction angiography revealed mean ± standard deviation aneurysm height/neck dimensions of 1.2 ± 0.4/1.2 ± 0.1, 2.9/3.1, 2.3 ± 0.6/1.9 ± 0.3, and 2.1 ± 0.6/2.0 ± 0.4 mm for the LRA/ASA, RCIA/ASA, RCIA/ASA + CLP, and LCIA/ASA + CLP groups, respectively. The survival rate was 29%, 17%, 71%, and 86% in the LRA/ASA, RCIA/ASA, RCIA/ASA + CLP, and LCIA/ASA + CLP groups, respectively. Histopathological analysis of these aneurysms confirmed the absence of the internal elastic lamina and revealed aneurysmal changes in the arterial wall, resembling the pathological findings observed in human aneurysm specimens. Conclusions Common iliac aneurysm models with ASA + CLP can be used to evaluate the safety and efficacy of endovascular devices.

OBJECTIVE Brain arteriovenous malformations (bAVMs) are rare but potentially devastating cerebrovascular lesions. Activating KRAS mutations are common in sporadic bAVMs, but their clinical implications remain unclear. The aim of this study was to investigate a novel therapeutic strategy for hemorrhagic bAVMs based on dual inhibition of the mitogen-activated protein kinase (MAPK) and vascular endothelial growth factor (VEGF) pathways using an engineered mouse model with a titratable KRAS G12V - GFP transgene. METHODS The AAV-BR1-CAG vector was used to deliver a KRAS G12V - GFP transgene specifically to cerebral endothelial cells. Mice received 5 × 10 7 to 5 × 10 10 genome copies of the vector, and bAVM formation, intracerebral hemorrhage (ICH), and overall survival were assessed. Mice with established hemorrhagic bAVMs were subsequently treated with trametinib (MEK inhibitor) or RMC-7977 (RAS inhibitor), with or without an anti–mouse VEGF antibody, starting 4 weeks after viral delivery. Overall survival was assessed. RESULTS Selective overexpression of KRAS G12V - GFP in cerebral endothelial cells led to the formation of bAVMs in a dose-dependent manner. Mice that received the highest transgene dose developed significantly more bAVMs, exhibited a higher ICH burden, and had worse overall survival compared with those that received lower transgene doses. In mice receiving the highest transgene dose, trametinib alone modestly improved the median overall survival (8.4 weeks vs 6.4 weeks, p = 0.049), while single-agent RMC-7977 showed no significant benefit. Anti-VEGF therapy alone reduced survival (6.9 weeks vs 9.6 weeks, p = 0.044). However, combination therapy with trametinib or RMC-7977 and anti-VEGF antibody significantly prolonged survival, with the most pronounced benefit seen in the RMC-7977 plus anti-VEGF group (13.1 weeks vs 6.7 weeks in controls, p = 0.024). CONCLUSIONS Our findings suggest that, in addition to promoting bAVM formation, KRAS mutations in cerebral endothelial cells might be causally implicated in bAVM rupture. Additionally, concomitant inhibition of the MAPK and VEGF pathways could be a promising novel therapeutic strategy for KRAS -mutated bAVMs.

Brain arteriovenous malformations (bAVMs) are a notable cause of intracranial hemorrhage, strongly associated with severe morbidity and mortality. Contemporary treatment options include surgery, stereotactic radiosurgery, and endovascular embolization, each of which has limitations. Hence, development of pharmacological interventions is urgently needed. The recent discovery of the presence of activating Kirsten rat sarcoma ( KRAS ) viral oncogene homologue mutations in most sporadic bAVMs has opened the door for a more comprehensive understanding of the pathogenesis of bAVMs and has pointed to entirely novel possible therapeutic targets. Herein, we review the status quo of genetics, animal models, and therapeutic approaches in bAVMs.

Purpose Optimizing the preparation of a 10 ml syringe for manual injection of contrast media can help operators obtain easier and faster injections. This study aims to compare the flow rates of different contrast media injection methods. Methods Different contrast media solutions were compared: 100% contrast (10 ml contrast), mixed contrast solution (8:2 contrast/saline), and layered contrast below saline (“Parfait”) in different volumes. Contrast media were injected at room temperature (20°C) and after heating (37°C). Four operators injected 10 ml syringes filled with different mediums through 5-French angiographic catheters. The average flow rate was used to compare different contrast injection mediums. The Kruskal-Wallis test with post-hoc pairwise comparisons using Bonferroni correction or Mann-Whitney U-tests were employed depending on the type of comparison. Results Compared to the 100% contrast solution, every Parfait media and mixed contrast solution demonstrated significantly higher flow rates (p < 0.001). The 5 ml saline Parfait had the highest flow rate among the Parfait solutions. The 5 ml saline Parfait and the mixed solution had comparable flow rates (p = 0.237). Higher flow rates were observed upon heating both 100% contrast (p < 0.001) and mixed contrast solutions (p < 0.001) in comparison to their flow rates at room temperature. Conclusion This study demonstrates the capability of the Parfait and mixed contrast injections to achieve higher flow rates than the 100% contrast solutions. Heating the contrast media to 37°C also proves to be a viable strategy for further enhancing the flow rates for 100% and mixed contrast solutions.

Background Sealing of the aneurysm neck with a Woven EndoBridge (WEB) device is recommended for disrupting the blood flow inside the aneurysm. This study investigates the relationship between WEB neck apposition and aneurysm occlusion rates. Methods Aneurysms treated with a WEB from March 2017 to May 2022 at a single center were included. WEB neck apposition (poor/good) and WEB protrusion (yes/no) were evaluated on post-detachment high resolution cone beam CT images. Angiographic occlusion was assessed with the Bicêtre Occlusion Scale score (BOSS). Univariate and multivariable analysis tested the association between neck apposition and occlusion rates. Results The study included 159 aneurysms in 141 patients (mean age 55.8±11.2 years; 64.2% women). Good neck apposition and protrusion were noted in 123 (77.4%) and 30 (18.9%) cases, respectively. Inter-rater agreements were good for neck apposition (κ=0.75) and protrusion (κ=0.78). Complete and adequate occlusion was achieved in 104 (65%) and 130 (82%) cases, respectively (median follow-up 18 months). Good neck apposition was a strong independent predictor for both adequate (adjusted OR (aOR)=5.9, 95% CI 2.4 to 14.9; P<0.001) and complete occlusion (aOR=7.1, 95% CI 3.0 to 18.1; P<0.001). Protrusion was more frequent in the adequate occlusion group versus the aneurysm recurrence group without reaching statistical significance (P=0.06), but was associated with more thromboembolic complications (9/30 (30%) vs 12/129 (9%); P<0.01). WEB shape modification was significantly greater in poor apposition cases (P=0.03). Conclusions Achieving good neck apposition of the WEB strongly predicts aneurysm occlusion during follow-up. WEB protrusion should be minimized due to the increase in thromboembolic risk with limited impact on aneurysm occlusion.

The New Zealand rabbit elastase-induced arterial aneurysm of the right common carotid artery remains a widely used model for assessing the effectiveness and safety of new neuroendovascular devices.1 This model offers a simple and reliable platform for pre-clinical in vivo investigations, crucial for comprehending the biological processes underlying aneurysm healing after endovascular treatment.2 Notably, the induced aneurysm exhibits morphological, hemodynamic, and histological characteristics similar to human intracranial aneurysms. The creation of the aneurysm is performed using open and endovascular techniques. Each step of the procedure requires a meticulous and controlled gesture to ensure reproducibility of the aneurysm and minimize animal misuse. In video 1 we present a step-by-step procedural guide for aneurysm creation and follow-up. We hope this resource will help in promoting this model and provide useful guidance for researchers in the field. Video 1 Surgical procedure of creating elastase-induced aneurysms in rabbits.