Evaluation of the MicroSeq System for Identification of Mycobacteria by 16S Ribosomal DNA Sequencing and Its Integration into a Routine Clinical Mycobacteriology Laboratory
ABSTRACT An evaluation of the MicroSeq 500 microbial identification system by nucleic acid sequencing and the Mayo Clinic experience with its integration into a routine clinical laboratory setting are described. Evaluation of the MicroSeq 500 microbial identification system was accomplished with 59 American Type Culture Collection (ATCC) strains and 328 clinical isolates of mycobacteria identified by conventional and 16S ribosomal DNA sequencing by using the MicroSeq 500 microbial identification system. Nucleic acid sequencing identified 58 of 59 (98.3%) ATCC strains to the species level or to the correct group or complex level. The identification results for 219 of 243 clinical isolates (90.1%) with a distance score of <1% were concordant with the identifications made by phenotypic methods. The remaining 85 isolates had distance scores of >1%; 35 (41.1%) were identified to the appropriate species level or group or complex level; 13 (15.3%) were identified to the species level. All 85 isolates were determined to be mycobacterial species, either novel species or species that exhibited significant genotypic divergence from an organism in the database with the closest match. Integration of nucleic acid sequencing into the routine mycobacteriology laboratory and use of the MicroSeq 500 microbial identification system and Mayo Clinic databases containing additional genotypes of common species and added species significantly reduced the number of organisms that could not be identified by phenotypic methods. The turnaround time was shortened to 24 h, and results were reported much earlier. A limited number of species could not be differentiated from one another by 16S ribosomal DNA sequencing; however, the method provides for the identification of unusual species and more accurate identifications and offers the promise of being the most accurate method available.
Clinical and Laboratory Features of
Mycobacterium mageritense
ABSTRACT Six clinical isolates of the nonpigmented, rapidly growing species Mycobacterium mageritense were recovered from sputum, bronchial wash, blood, sinus drainage, and two surgical wound infections from separate patients in Texas, New York, Louisiana, and Florida. The isolates matched the ATCC type strain by PCR restriction enzyme analysis of the 65-kDa hsp gene sequence of Telenti, high-performance liquid chromatography, biochemical reactions, and partial 16S rRNA gene sequencing. These are the first isolates of this species to be described in the United States and the first isolates to be associated with clinical disease. Susceptibility testing of all known isolates of the species revealed all isolates to be susceptible or intermediate to amikacin, cefoxitin, imipenem, and the fluoroquinolones and sulfonamides but resistant to clarithromycin. Because of their phenotypic and clinical similarity to isolates of the Mycobacterium fortuitum third biovariant complex (sorbitol positive), isolates of M. mageritense are likely to go undetected unless selected carbohydrate utilization or molecular identification methods are used.
Oxidative Stress Increases Susceptibility of
Mycobacterium tuberculosis
to Isoniazid
ABSTRACT Isoniazid is a first-line antibiotic used in the treatment of infections caused by Mycobacterium tuberculosis . Isoniazid is a prodrug requiring oxidative activation by the catalase-peroxidase hemoprotein, KatG. Resistance to isoniazid can be obtained by point mutations in the katG gene, with one of the most common being a threonine-for-serine substitution at position 315 (S315T). The S315T mutation is found in more than 50% of isoniazid-resistant clinical isolates and results in an ≈200-fold increase in the MIC of isoniazid compared to that for M. tuberculosis H37Rv. In the present study we investigated the hypothesis that superoxide plays a role in KatG-mediated isoniazid activation. Plumbagin and clofazimine, compounds capable of generating superoxide anion, resulted in a lower MIC of isoniazid for M. tuberculosis H37Rv and a strain carrying the S315T mutation. These agents did not cause as great of an increase in isoniazid susceptibility in the mutant strain when the susceptibilities were assessed by using the inhibitory concentration that causes a 50% decrease in growth. These results provide evidence that superoxide can play a role in isoniazid activation. Since clofazimine alone has antitubercular activity, the observation of synergism between clofazimine and isoniazid raises the interesting possibility of using both drugs in combination to treat M. tuberculosis infections.
Evaluation of Gen-Probe Amplified Mycobacterium Tuberculosis Direct Test by Using Respiratory and Nonrespiratory Specimens in a Tertiary Care Center Laboratory
ABSTRACT The performance of the Amplified Mycobacterium Tuberculosis Direct (AMTD) test (Gen-Probe Inc., San Diego, Calif.) was assessed in a large tertiary care mycobacteriology laboratory. Both acid-fast smear-positive and smear-negative respiratory and nonrespiratory clinical specimens were analyzed. From February 1998 to 4 October 2001, AMTD assays were performed on 391 respiratory specimens and 164 nonrespiratory specimens. The AMTD assay was compared to the “gold standard” of combined culture and clinical diagnosis. The overall sensitivity for all specimens, including those for which no smear result was available, was 91.2%. The overall sensitivities of the assay, including acid-fast smear-positive and -negative specimens, were 97.8 and 77.3% for respiratory and nonrespiratory specimens, respectively. The corresponding specificities for respiratory and nonrespiratory specimens were 99.1 and 98.5%, respectively. The overall specificity for all specimens was 98.9%. Positive and negative predictive values were 93.9 and 99.7% and 91.7 and 96.4% for respiratory and nonrespiratory specimens, respectively. The time saved by using the AMTD test for making a diagnosis of tuberculosis instead of using culture was 8.99 days. Inhibitors to the AMTD assay were found in 3.1% of respiratory specimens and 3.1% of nonrespiratory specimens. The assay, used in a general mycobacteriology laboratory setting, represents an important advance in improving the speed and accuracy of diagnosis in the management of patients with tuberculosis.
Comparison of the BACTEC MYCO/F Lytic Bottle to the Isolator Tube, BACTEC Plus Aerobic F/Bottle, and BACTEC Anaerobic Lytic/10 Bottle and Comparison of the BACTEC Plus Aerobic F/Bottle to the Isolator Tube for Recovery of Bacteria, Mycobacteria, and Fungi
ABSTRACT The BACTEC MYCO/F Lytic blood culture bottle (Becton Dickinson Diagnostic Instrument Systems, Sparks, Md.) is designed to optimize the recovery of fungi and mycobacteria; however, this bottle also supports the growth of most aerobic bacteria. We compared the MYCO/F Lytic bottle with two other BACTEC bottles and the Isolator system for the recovery of bacteria as well as fungi and mycobacteria from blood. A total of 6,108 blood culture sets were inoculated with blood obtained from adult patients. Twenty-five to 28 ml of blood collected by a phlebotomy team for each blood culture set was randomly distributed into each of four blood culture receptacles: the Isolator tube (Wampole Laboratories, Cranbury, N.J.) and three BACTEC bottles: the MYCO/F Lytic bottle, the BACTEC Plus Aerobic/F bottle, and the BACTEC Anaerobic Lytic/10 bottle. The sediment from the Isolator tube was inoculated onto chocolate agar (CA), brain heart infusion agar (BHI), and Sabouraud dextrose agar (SDA) and into a BACTEC 13A bottle. Incubation durations were as follows: MYCO/F Lytic bottle, 42 days; Plus Aerobic/F bottle, 5 days; Anaerobic Lytic/10 bottle, 5 days; sediment from Isolator tube on CA, 3 days; sediment from Isolator tube on BHI, 30 days; sediment from Isolator tube on SDA, 30 days; and sediment from Isolator tube in a BACTEC 13A bottle, 42 days. Two isolates of Histoplasma capsulatum were recovered from the Isolator tube only. Three isolates of Mycobacterium tuberculosis complex were recovered: two isolates from the MYCO/F Lytic bottle only and one isolate from the Isolator tube (whose sediment was inoculated into the BACTEC 13A bottle) only. Two isolates of Cryptococcus neoformans were recovered: one from the MYCO/F Lytic bottle only and the other from the MYCO/F Lytic bottle and the Isolator tube (whose sediment was inoculated into the BACTEC 13A bottle). For potential pathogens overall, there was a statistical difference in recovery that favored the Isolator system over the MYCO/F Lytic bottle ( P = 0.0015), including statistically significant differences for Staphylococcus aureus ( P = 0.0001) and Streptococcus pneumoniae ( P = 0.0313). However, there was no statistically significant difference between the two blood culture systems when detection of bloodstream infection was considered. The time to detection for all potential pathogens combined was less for the MYCO/F Lytic bottle than for the Isolator system ( P = 0.0004). Overall, the potential pathogen recovery was greater for the BACTEC Plus Aerobic/F bottle than for either the Isolator system ( P = 0.0003) or the MYCO/F Lytic bottle ( P = 0.0001). However, the BACTEC Plus Aerobic/F bottle did not recover M. tuberculosis , H. capsulatum , or C. neoformans isolates. The combination of the Isolator system and MYCO/F Lytic bottle may be useful as a selective blood culture method to optimize the recovery of fungi and mycobacteria from blood. Compared with the manual Isolator system, the MYCO/F Lytic system has the advantage of less preanalytic processing and continuous automated monitoring of bottles for growth by the BACTEC 9240 instrument.