Rizvi, Asim

Introduction: Previous studies have successfully created blood clot analogues for In-vitro testing using animal blood. Blood components vary greatly among species and thus, creating clot analogues with human blood is likely a more accurate representation of thrombi formed in the human vasculature. We present a novel method of creating clot analogues from human blood and platelets that mimic the process by which clots form In-vivo . Methods: Following IRB approval from Mayo Clinic, human whole blood and platelets donations were obtained from the Blood Transfusion service. The whole blood was centrifuged at 1,200RPM for 20 minutes to separate it into its constituents. Plasma was removed and the remaining Red Blood Cells and Buffy Coat were mixed together by inverting. A total of 12 clot analogues were created with varying concentrations of components; Red Blood cells/Buffy Coat, Plasma and Platelets. Thrombin was added first to stimulate platelets activation for a total of 5 mins whilst continuously mixing by inversion. The RBC/WBC mixture was added next followed by CaCl2. The mixture was then quickly drawn into a 3cc syringe and spun overnight at 20RPM at room temperature to mimic dynamic flow conditions. Macro-photographs were taken to display the variation in texture and color between different clot analogue types. The clots were then fixed in 10% neutral buffered formalin for 24 hours prior to being processed. Histopathological analysis was performed using Hematoxylin and Eosin (H&E) and Martius Scarlet Blue (MSB) staining to confirm clot composition. Results: Red Blood cell-rich, Fibrin-rich, Platelet-rich and mixed clot analogues that accurately mimic clots retrieved from Acute Ischemic Stroke Patients were created. The range of histopathological compositions of the clot analogues is similar to that of the clinical samples. Conclusions: The addition and activation of platelets is key to creating accurate clot analogues for In-vitro testing. Spinning the clots is important to prevent natural sedimentation and mimic the In-vivo situation.

Ischemic stroke results from thrombus becoming lodged in a vessel in the cerebrovascular circulation. The constituents of the thrombus can vary widely and have direct effects on the mechanical properties of the thrombus. Thrombectomy procedures could potentially be improved if the mechanical properties of the thrombus could be determined prior to treatment. In the study, we developed a new non-contact method associated with Rayleigh wave propagations for evaluating mechanical properties of human clotted blood, referred to as ultrasound-mediated optical coherence elastography (UOCE). Due to clot mechanical properties being associated with fibrin and platelet content, eight different clot analogues with varying fibrin/platelets concentrations, from 0.6% (control group) to 19.0%, were produced, and the clot analog in each concentration was repeatedly measured five times. A highly focused transducer with a center frequency of 7.5 MHz was used to generate acoustic radiation forces exerted on the surface of clotted blood to induce Rayleigh wave propagations. The transducer was driven by a 50 dB radio frequency amplifier a 4 ms pulse which was repeated at a rate of 19 Hz. The optical coherence tomography (OCT) acquisition was set to 50 lateral positions and 4000 A-scans for each lateral position at a 76 kHz scan rate for total acquisition time of 52.6 ms. The results demonstrated that the Rayleigh wave group velocities positively correlated with the concentrations of fibrin/platelets. The group velocities ranged from 0.78 ± 0.02 m/s for 0.6% fibrin/platelets and increased to 2.42 ± 0.06 m/s at a fibrin/platelets concentration of 19.0%. There are statistically significant difference ( p <0.05) between control group and all clot analogues with a fibrin/platelets concentration of greater than 2.3%. In conclusion, we propose UOCE as a novel approach capable of evaluating mechanical properties of human blood clots based on Rayleigh wave propagation. This sensitive method can be used for the evaluation of the mechanical properties of human blood clot analogues and thrombectomy samples.

Introduction: Characterization of acute ischemic stroke thrombi has typically focused on the two dimensional (2D) histological characterization of the thrombus. Little is known about the three dimensional (3D) structure of these occlusive thrombi. Electron Microscopy (EM) can be used to obtain 3D information about the organization of clot components. Individual structures can be segmented and qualitative and quantitative information obtained from the clots. Methods: Following IRB approval from Mayo Clinic, acute ischemic stroke clot samples were collected from 10 patients treated at Mayo Clinic. Samples were immediately fixed in fresh modified Trumps fixative solution. A representative fragment of clot was taken and split longitudinally into two pieces; one piece was sent for 3D-EM analysis and the other for histological processing and analysis. Hematoxylin and eosin stain (H&E) and Martius Scarlett Blue (MSB) histological stains were used for conventional histopathology evaluation and components analysis. Immunohistochemical (IHC) staining using anti-CD42b (Platelets) was applied to confirm the presence of platelets in each clot. Serial block-face scanning electron microscopy was used to generate high-resolution three-dimensional images. Results: The 2D morphological features of the clot were identified using H&E, MSB and anti-CD42b staining. The 3D organization of thrombi varies greatly, both within and between clots depending on the constituents. Red Blood Cell-rich areas are mainly composed of Red Blood Cells packaged tightly together, with a small number of Fibrin strands interwoven between the cells. Fibrin-rich areas are characterized by dense networks of fibrin strands along with platelets and White Blood Cells with some sparse Red Blood Cells present. Platelet-rich areas are composed of large volumes of de-granulated platelets, some fibrin stands and white blood cells and an absence of Red Blood Cells. Conclusions: 3D electron microscopy can provide important information on the organization of components within thrombi. This could provide key information on the age and etiology of the thrombus. In addition, it may help to inform thrombolytic treatment and medical device design.

Background First pass effect (FPE) in mechanical thrombectomy is thought to be associated with good clinical outcomes. Objective To determine FPE rates as a function of thrombectomy technique and to compare clinical outcomes between patients with and without FPE. Methods In July 2020, a literature search on FPE (defined as modified Thrombolysis in Cerebral Infarction (TICI) 2c–3 after a single pass) and modified FPE (mFPE, defined as TICI 2b–3 after a single pass) and mechanical thrombectomy for stroke was performed. Using a random-effects meta-analysis, we evaluated the following outcomes for both FPE and mFPE: overall rates, rates by thrombectomy technique, rates of good neurologic outcome (modified Rankin Scale score ≤2 at day 90), mortality, and symptomatic intracerebral hemorrhage (sICH) rate. Results Sixty-seven studies comprising 16 870 patients were included. Overall rates of FPE and mFPE were 28% and 45%, respectively. Thrombectomy techniques shared similar FPE (p=0.17) and mFPE (p=0.20) rates. Higher odds of good neurologic outcome were found when we compared FPE with non-FPE (56% vs 41%, OR=1.78) and mFPE with non-mFPE (57% vs 44%, OR=1.73). FPE had a lower mortality rate (17% vs 25%, OR=0.62) than non-FPE. FPE and mFPE were not associated with lower sICH rate compared with non-FPE and non-mFPE (4% vs 18%, OR=0.41 for FPE; 5% vs 7%, OR=0.98 for mFPE). Conclusions Our findings suggest that approximately one-third of patients achieve FPE and around half of patients achieve mFPE, with equivalent results throughout thrombectomy techniques. FPE and mFPE are associated with better clinical outcomes.

Summary Cardiac surgery has been shown to be associated with increased risk of acute ischemic stroke. This report presents a case of a successful mechanical embolectomy procedure to treat a patient for an acute ischemic stroke, which was caused by the cardiac embolization of a ‘foreign body’ containing debris following a redo sternotomy procedure for mitral valve replacement and tricuspid valve annuloplasty.