Elder, Benjamin D.

OBJECTIVE Hounsfield units (HUs) may better predict biomechanical complications of instrumented fusion than conventional bone quality measures. Typically, noncontrast axial slices are used. This study aims to address the influence of reconstruction plane and contrast administration on measured HUs in patients undergoing lumbar spine imaging. METHODS Patients without prior spine surgery, infection, or tumor were identified for 3 groups: 1) 150 patients with high-resolution noncontrast lumbar CT, 2) 109 patients with noncontrast and contrast-enhanced lumbar CT, and 3) 100 patients with noncontrast lumbar CT and lumbar CT myelograms. Noncontrast HU measures in group 1 were compared between axial, sagittal, and coronal reconstructions. HU measures for groups 2 and 3 were compared on axial slice averages. HU measures between groups were compared using the Wilcoxon signed-rank test to investigate the presence of a statistically significant difference between groups (α = 0.05). Linear regression was also used to determine the degree of correlation between HU measures on noncontrast axial CT slices and HU measures on other sequences. RESULTS The mean patient age was 58.8 ± 15.9 years for group 1 (54.0% male), 65.5 ± 15.9 years for group 2 (61.5% male), and 65.2 ± 14.2 years (53.5% male) for group 3. Comparison of HU measures in group 1 showed significant differences across measurement modalities with the exception of axial average versus coronal average measures (p = 0.257) and sagittal average versus midsagittal measures (p = 0.726). There were significant differences in average axial HUs for each vertebral body between contrast and noncontrast lumbar CT and between CT myelography and noncontrast CT. Linear regression analysis demonstrated an extremely high correlation between measures for all methodologies (r2 = 0.950–0.986, all p < 0.001), and between contrast-enhanced and noncontrast studies (r2 = 0.870, p < 0.001). Measurements on CT myelography were significantly correlated with those in noncontrast studies, although to a lesser degree (r2 = 0.745, p < 0.001). CONCLUSIONS HU measures on noncontrast CT appear similar across multiple different planes, suggesting that a simpler methodology such as single-slice measurement on midsagittal reconstruction may allow for more rapid assessment of underlying bone quality. Consistent with prior work, contrast-enhanced CT sequences appear to reliably mirror underlying bone quality, although CT myelogram measures may vary in a more unpredictable way that precludes their use to interpret underlying bone quality. HU measures on contrast-enhanced studies are on average greater, suggesting the need for higher cutoff values.

Study Design Retrospective cohort study. Objective The impact of paraspinal sarcopenia following fusions that extend to the upper thoracic spine remain unknown. The purpose of the present study was to assess the impact of sarcopenia on the development of PJK and PJF following spine fusion surgery from the upper thoracic spine to the pelvis. Methods We performed a retrospective review of patients who underwent spine fusion surgery that extended caudally to the pelvis and terminated cranially between T1-6. The cohort was divided into 2 groups: (1) patients without PJK or PJF and (2) patients with PJK and/or PJF. Univariate and multivariate analyses were performed to determine risk factors for the development of proximal junctional complications. Results We identified 81 patients for inclusion in this study. Mean HU at the UIV was 186.1 ± 47.5 in the cohort of patients without PJK or PJF, which was substantially higher than values recorded in the PJK/PJF subgroup (142.4 ± 40.2) ( P < 0.001). Severe multifidus sarcopenia was identified at a higher rate in the subgroup of patients who developed proximal junction pathology (66.7%) than in the subgroup of patients who developed neither PJK nor PJF (7.4%; P < 0.001). Multivariate analysis demonstrated both low HU at the UIV and moderate-severe multifidus sarcopenia to be risk factors for the development of PJK and PJF. Conclusions Severe paraspinal sarcopenia and diminished bone density at the UIV impart an increased risk of developing PJK and PJF in following thoracolumbar fusions from the upper thoracic spine to the pelvis.

OBJECTIVE The purpose of this study was to determine the effect of osteoporosis medications on opportunistic CT-based Hounsfield units (HU). METHODS Spine and nonspine surgery patients were retrospectively identified who had been treated with romosozumab for 3 to 12 months, teriparatide for 3 to 12 months, teriparatide for > 12 months, denosumab for > 12 months, or alendronate for > 12 months. HU were measured in the L1–4 vertebral bodies. One-way ANOVA was used to compare the mean change in HU among the five treatment regimens. RESULTS In total, 318 patients (70% women) were included, with a mean age of 69 years and mean BMI of 27 kg/m 2 . There was a significant difference in mean HU improvement (p < 0.001) following treatment with romosozumab for 3 to 12 months (n = 32), teriparatide for 3 to 12 months (n = 30), teriparatide for > 12 months (n = 44), denosumab for > 12 months (n = 123), and alendronate for > 12 months (n = 100). Treatment with romosozumab for a mean of 10.5 months significantly increased the mean HU by 26%, from a baseline of 85 to 107 (p = 0.012). Patients treated with teriparatide for > 12 months (mean 23 months) experienced a mean HU improvement of 25%, from 106 to 132 (p = 0.039). Compared with the mean baseline HU, there was no significant difference after treatment with teriparatide for 3 to 12 months (110 to 119, p = 0.48), denosumab for > 12 months (105 to 107, p = 0.68), or alendronate for > 12 months (111 to 113, p = 0.80). CONCLUSIONS Patients treated with romosozumab for a mean of 10.5 months and teriparatide for a mean of 23 months experienced improved spinal bone mineral density as estimated by CT-based opportunistic HU. Given the shorter duration of effective treatment, romosozumab may be the preferred medication for optimization of osteoporotic patients in preparation for elective spine fusion surgery.

OBJECTIVE The aims of this study were to 1) define the incidence of transforaminal lumbar interbody fusion (TLIF) interbody subsidence; 2) determine the relative importance of preoperative and intraoperative patient- and instrumentation-specific risk factors predictive of postoperative subsidence using CT-based assessment; and 3) determine the impact of TLIF subsidence on postoperative complications and fusion rates. METHODS All adult patients who underwent one- or two-level TLIF for lumbar degenerative conditions at a multi-institutional academic center between 2017 and 2019 were retrospectively identified. Patients with traumatic injury, infection, malignancy, previous fusion at the index level, combined anterior-posterior procedures, surgery with greater than two TLIF levels, or incomplete follow-up were excluded. Interbody subsidence at the superior and inferior endplates of each TLIF level was directly measured on the endplate-facing surface of both coronal and sagittal CT scans obtained greater than 6 months postoperatively. Patients were grouped based on the maximum subsidence at each operative level classified as mild, moderate, or severe based on previously documented < 2-mm, 2- to 4-mm, and ≥ 4-mm thresholds, respectively. Univariate and regression analyses compared patient demographics, medical comorbidities, preoperative bone quality, surgical factors including interbody cage parameters, and fusion and complication rates across subsidence groups. RESULTS A total of 67 patients with 85 unique fusion levels met the inclusion and exclusion criteria. Overall, 28% of levels exhibited moderate subsidence and 35% showed severe subsidence after TLIF with no significant difference in the superior and inferior endplate subsidence. Moderate (≥ 2-mm) and severe (≥ 4-mm) subsidence were significantly associated with decreases in cage surface area and Taillard index as well as interbody cages with polyetheretherketone (PEEK) material and sawtooth surface geometry. Severe subsidence was also significantly associated with taller preoperative disc spaces, decreased vertebral Hounsfield units (HU), the absence of bone morphogenetic protein (BMP) use, and smooth cage surfaces. Regression analysis revealed decreases in Taillard index, cage surface area, and HU, and the absence of BMP use predicted subsidence. Severe subsidence was found to be a predictor of pseudarthrosis but was not significantly associated with revision surgery. CONCLUSIONS Patient-level risk factors for TLIF subsidence included decreased HU and increased preoperative disc height. Intraoperative risk factors for TLIF subsidence were decreased cage surface area, PEEK cage material, bullet cages, posterior cage positioning, smooth cage surfaces, and sawtooth surface designs. Severe subsidence predicted TLIF pseudarthrosis; however, the causality of this relationship remains unclear.

AbstractThe growing aging population, with its associated chronic diseases, underscores the urgency for effective tissue regeneration strategies. Biomaterials play a pivotal role in the realm of tissue reconstruction and regeneration, with a distinct shift toward minimally invasive (MI) treatments. This transition, fueled by engineered biomaterials, steers away from invasive surgical procedures to embrace approaches offering reduced trauma, accelerated recovery, and cost‐effectiveness. In the realm of MI tissue repair and cargo delivery, various techniques are explored. While in situ polymerization is prominent, it is not without its challenges. This narrative review explores diverse biomaterials, fabrication methods, and biofunctionalization for injectable pre‐formed scaffolds, focusing on their unique advantages. The injectable pre‐formed scaffolds, exhibiting compressibility, controlled injection, and maintained mechanical integrity, emerge as promising alternative solutions to in situ polymerization challenges. The conclusion of this review emphasizes the importance of interdisciplinary design facilitated by synergizing fields of materials science, advanced 3D biomanufacturing, mechanobiological studies, and innovative approaches for effective MI tissue regeneration.

AbstractDegenerative spinal pathology is a widespread medical issue, and spine fusion surgeries are frequently performed. In this study, we fabricated an injectable bioactive click chemistry polymer cement for use in spinal fusion and bone regrowth. Taking advantages of the bioorthogonal click reaction, this cement can be crosslinked by itself eliminating the addition of a toxic initiator or catalyst, nor any external energy sources like UV light or heat. Furthermore, nano‐hydroxyapatite (nHA) and microspheres carrying recombinant human bone morphogenetic protein‐2 (rhBMP‐2) and recombinant human vascular endothelial growth factor (rhVEGF) were used to make the cement bioactive for vascular induction and osteointegration. After implantation into a rabbit posterolateral spinal fusion (PLF) model, the cement showed excellent induction of new bone formation and bridging bone, achieving results comparable to autograft control. This is largely due to the osteogenic properties of nano‐hydroxyapatite (nHA) and the released rhBMP‐2 and rhVEGF growth factors. Since the availability of autograft sources is limited in clinical settings, this injectable bioactive click chemistry cement may be a promising alternative for spine fusion applications in addressing various spinal conditions.

Study Design: Retrospective cohort analysis. Objective: To determine whether the C2 exposure technique was a predictor of change in cervical alignment and patient-reported outcomes measures (PROMs) after posterior cervical decompression and fusion (PCDF) for degenerative indications. Background: In PCDF handling of the C2 posterior paraspinal musculature during the operative approach varies by surgeon technique. To date, no studies have investigated whether maintenance of the upper cervical semispinalis cervicis attachments as compared with complete reflection of upper cervical paraspinal musculature from the posterior bony elements is associated with superior radiographic and clinical outcomes after PCDF. Patients and Methods: All adult patients who underwent C2–T2 PCDF for myelopathy or myeloradiculopathy at multi-institutional academic centers between 2013 and 2020 were retrospectively identified. Patients were dichotomized by the C2 exposure technique into semispinalis preservation or midline muscular reflection groups. Preoperative and short and long-term postoperative radiographic outcomes (upper cervical alignment, global alignment, and fusion status) and PROMs (Visual Analog Scale–Neck, Neck Disability Index, and Short Form-12) were collected. Univariate analysis compared patient factors, radiographic measures, and PROMs across C2 exposure groups. Results: A total of 129 patients met the inclusion/exclusion criteria (73 muscle preservation and 56 muscle reflection). Patients in the muscular preservation group were on average younger (P = 0.005) and more likely to have bone morphogenic protein (P < 0.001) and C2 pars screws (P = 0.006) used during surgery. Preoperative to postoperative changes in C2 slope, C2 tilt, C2–C3 segmental lordosis, C2–C3 listhesis, C0–C2 Cobb angle, proximal junctional kyphosis, ADI, C1 lamina-occiput distance, C2 sagittal vertical axis, C2–C7 lordosis, and PROMs at all follow-up intervals did not vary significantly by C2 exposure technique. Likewise, there were no significant differences in fusion status, C2–C3 pseudoarthrosis, C2 screw loosening, and complication and revision rates between C2 exposure groups. Conclusions: Preservation of C2 semispinalis attachments versus muscular reflection did not significantly impact cervical alignment, clinical outcomes, or proximal junction complications in long-segment PCDF. Level of Evidence: Level III.

Abstract Segmental bone defects, often clinically treated with nondegradable poly(methylmethacrylate) (PMMA) in multistage surgeries, present a significant clinical challenge. Our study investigated the efficacy of 3D printed biodegradable polycaprolactone fumarate (PCLF)/PCL spacers in a one‐stage surgical intervention for these defects, focusing on early bone regeneration influenced by spacer porosities. We compared nonporous PCLF/PCL and PMMA spacers, conventionally molded into cylinders, with porous PCLF/PCL spacers, 3D printed to structurally mimic segmental defects in rat femurs for a 4‐week implantation study. Histological analysis, including tissue staining and immunohistochemistry with bone‐specific antibodies, was conducted for histomorphometry evaluation. The PCLF/PCL spacers demonstrated compressive properties within 6 ± 0.5 MPa (strength) and 140 ± 15 MPa (modulus). Both porous PCLF/PCL and Nonporous PMMA formed collagen‐rich membranes (PCLF/PCL: 92% ± 1.3%, PMMA: 86% ± 1.5%) similar to those induced in the Masquelet technique, indicating PCLF/PCL's potential for one‐stage healing. Immunohistochemistry confirmed biomarkers for tissue regeneration, underscoring PCLF/PCL's regenerative capabilities. This research highlights PCLF/PCL scaffolds' ability to induce membrane formation in critical‐sized segmental bone defects, supporting their use in one‐stage surgery. Both solid and porous PCLF/PCL spacers showed adequate compressive properties, with the porous variants exhibiting BMP‐2 expression and woven bone formation, akin to clinical standard PMMA. Notably, the early ossification of the membrane into the pores of porous scaffolds suggests potential for bone interlocking and regeneration, potentially eliminating the need for a second surgery required for PMMA spacers. The biocompatibility and biodegradability of PCLF/PCL make them promising alternatives for treating critical bone defects, especially in vulnerable patient groups.

Background: Multisegmental pathologic autofusion occurs in patients with ankylosing spondylitis (AS) and diffuse idiopathic skeletal hyperostosis (DISH). It may lead to reduced vertebral bone density due to stress shielding. Methods: This study aimed to determine the effects of autofusion on bone density by measuring Hounsfield units (HU) in the mobile and immobile spinal segments of patients with AS and DISH treated at a tertiary care center. The mean HU was calculated for five distinct regions—cranial adjacent mobile segment, cranial fused segment, mid-construct fused segment, caudal fused segment, and caudal adjacent mobile segment. Means for each region were compared using paired-sample t-tests. Multivariable regression was used to determine independent predictors of mid-fused segment HUs. Results: One hundred patients were included (mean age 76 ± 11 years, 74% male). The mean HU for the mid-construct fused segment (100, 95% CI [86, 113]) was significantly lower than both cranial and caudal fused segments (174 and 108, respectively; both p < 0.001), and cranial and caudal adjacent mobile segments (195 and 115, respectively; both p < 0.001). Multivariable regression showed the mid-construct HUs were predicted by history of smoking (−30 HU, p = 0.009). Conclusions: HUs were significantly reduced in the middle of long-segment autofusion, which was consistent with stress shielding. Such shielding may contribute to the diminution of vertebral bone integrity in AS/DISH patients and potentially increased fracture risk.