Citations

Abstract: AIM: The purpose of this study is to investigate the safety and effectiveness of remote ischemic conditioning (RIC) as a therapeutic intervention for cerebral ischemia in patients with Takayasu arteritis (TA). METHODS: TARIC-1 is a randomized, double-blind, parallel-group pilot trial conducted at Xuanwu Hospital, Capital Medical University. Participants with TA and reduced cerebral blood perfusion are randomly allocated to either the RIC or sham-RIC groups. Both the groups receive conventional medical care, with the RIC group receiving twice-daily sessions of 200 mmHg inflation pressure and the sham-RIC group receiving 60 mmHg inflation pressure, for 24 consecutive weeks. OUTCOMES: The primary outcome is the change in mean cerebral blood flow across the entire brain and regions of interest following the 24-week RIC treatment. Secondary outcomes include clinical assessments using the Indian Takayasu Clinical Activity Score 2010, Vasculitis Damage Index, and Birmingham Vasculitis Activity Score at 24 weeks postintervention. Changes in arterial transit time and the incidence of major adverse cerebrovascular events are additional secondary outcomes. Safety outcomes include mortality and any adverse events, including skin changes and pain ratings, within the 24-week period. SAMPLE SIZE ESTIMATES: This pilot study plans to enroll 22 patients per group, totaling 44 participants. CONCLUSIONS: In individuals with TA, RIC may be a well-tolerated treatment that enhances cerebral perfusion and lowers the risk of ischemic cerebrovascular episodes. TRIAL REGISTRATION: http://www.clinicaltrials.gov (identifier: NCT06178419).

Intracerebral hemorrhage (ICH), caused by the rupture of small blood vessels, remains the least treatable subtype of stroke. The pathophysiology of ICH involves immediate mechanical compression from the hematoma, followed by secondary injuries such as cerebral edema, inflammation, and neuronal damage. Management aims to prevent hematoma expansion, enable safe and effective hematoma evacuation, and mitigate secondary injuries. Recent advancements in clinical management, including blood pressure control, hemostatic therapy, surgical and minimally invasive hematoma removal, and complication management, offer new hope. This review synthesizes these advancements, integrating insights from recent research and clinical trials, and highlights significant progress in evidence-based approaches that pave the way for precise and personalized treatment strategies. Nonetheless, further research is necessary to enhance our understanding of ICH mechanisms and develop more effective clinical interventions.

Definitive endoderm (DE) differentiation leads to the development of the major internal organs including the liver, intestines, pancreas, gall bladder, prostate, bladder, thyroid, and lungs. The two primary methods utilized for in vitro differentiation of induced pluripotent stem cells (iPSCs) into DE cells are the growth factor (GF) and the small molecule (SM) approaches. The GSK-3 inhibitor (CHIR99021) is a key factor for the SM approach. Activin A and Wnt3a are utilized in the GF approach. In this study, both the GF and SM protocols were compared to each other. The results show that both the GF and SM protocol produce DE with a similar morphological phenotype, gene and protein expression, and a similar level of homogeneity and functionality. However, on both the gene expression and proteomic level, there is a divergence between the two protocols during hepatic specification. Proteomic analysis shows that hepatoblasts from the GF protocol have significantly differentially expressed proteins (DEPs) involved in liver metabolic pathways compared to the SM protocol. Well-validated DE differentiation protocols are needed to fully unlock the clinical potential of iPSCs. In the first step of generating DE-derived tissue, either protocol can be utilized. However, for hepatic specification, the GF protocol is more effective.

AbstractFunctionally gradient materials emulate nature's ability to seamlessly blend properties through variations in material composition, unlocking advanced engineering applications such as biomedical devices and high‐performance composites. Additive manufacturing, particularly stereolithography, enables sophisticated 3D geometries with diverse materials. However, current stereolithography‐based multi‐material 3D printing is constrained by time‐intensive material switching and compromised interfacial properties. To overcome these challenges, we present dynamic fluid‐assisted micro continuous liquid interface production (DF‐µCLIP), a high‐speed multi‐material 3D printing platform that integrates varying compositions in a fully continuous fashion. By utilizing the polymerization‐free “dead zone”, vliquid resins are seamlessly replenished within a resin bath equipped with dynamic fluidic channels and a synchronized material supply system. DF‐µCLIP achieves ultra‐fast printing speeds of 90 mm/hour with 7.4 µ m pixel‐1 resolution while enabling on‐the‐fly material transitions. This strategy enhances mechanical strength at multi‐material interface through entangled polymer networks and promotes seamless material transitions between distinct materials ilike fragile hydrogels and rigid polymers, addressing interfacial failure caused by mismatch of swelling behavior. Additionally, dynamic material replenishment with real‐time composition control enables continuous gradient printing instead of the conventional step‐wise controlled gradient. Demonstrations include polymers with gradient color transitions and gradient carbon nanotube (CNT) composites with seamlessly varying conductivity.

AimThis study aimed to evaluate the impact of intraoperative direct sonication on the yield of traditional culture and the time to positivity (TTP) of cultures obtained for periprosthetic joint infection (PJI), thereby assessing its potential to improve diagnostic efficiency and reduce contamination risk.MethodA prospective cohort study was conducted at a tertiary care center, involving 190 patients undergoing revision surgery for PJI from August 2021 to January 2024. Patients were included based on the 2018 International Consensus Meeting definition of PJI. The study utilized a novel sonication protocol, which involved direct intraoperative sonication of the implant and tissue, followed by incubation in a BACT/ALERT 3D system. The primary outcomes measured were the number and percentage of positive culture samples, identified microorganisms, and the TTP of each culture. Statistical analysis was performed using R software, with various tests applied to assess the significance of findings.ResultsThe study included 510 positive cultures from 190 patients, demonstrating that sonication significantly improved the positivity rate for both tissue and prosthesis specimens (p < 0.05). The median TTP for all samples was 3.13 days, with sonicated samples showing a significantly shorter TTP compared to non-sonicated samples (p < 0.05). Specifically, the shortest median TTP was observed in prosthesis post-sonication samples. Furthermore, the study found that Gram-positive organisms had a shorter TTP than gram-negative organisms, and specific microorganisms like Staphylococcus aureus and MRSE showed the fastest TTP. The analysis also revealed higher positivity rates in chronic PJIs compared to acute PJIs for sonicated tissue samples.ConclusionsThe study demonstrates that intraoperative direct sonication combined with the BACT/ALERT 3D system can significantly enhance the diagnostic yield of cultures and reduce the TTP for common PJI pathogens. This novel technique not only improves pathogen detection, facilitating the tailoring of antibiotic therapy, but also potentially reduces the risk of contamination associated with sonication. These findings suggest that direct intraoperative sonication could be a valuable addition to the current diagnostic protocols for PJI, contributing to more effective management and treatment of this complex condition. Further research is necessary to explore the clinical significance of TTP and its correlation with patient outcomes in PJI.

AbstractIron Dextran is a widely used iron oxide compound to treat iron‐deficiency anemia patients in the clinic. Similar to other iron oxide compounds such as Ferumoxytol, it can also be used off‐label as an intravascular magnetic resonance imaging (MRI) contrast agent due to its strong iron‐induced T2 and T2* shortening effects. In this study, we seek to evaluate the feasibility of using Iron Dextran enhanced multi‐echo susceptibility weighted imaging (SWI) MRI at 7T to image arterial and venous blood vessels in the human brain. Phantom experiments were performed to measure the r2* relaxivity for Iron Dextran in blood, based on which the SWI sequence was optimized. Pre‐ and post‐infusion MR images were acquired in human subjects from which maps of arteries and veins were extracted. The post‐contrast SWI images showed enhanced susceptibility difference between blood and the surrounding tissue in both arteries and veins. Our results showed that the proposed Iron Dextran enhanced multi‐echo SWI approach allowed the visualization of blood vessels with diameters down to ~100 μm, including small blood vessels supplying and draining small brain structures such as the hippocampus. We conclude that Iron Dextran can be an alternative iron‐based MRI contrast agent for blood vessel imaging in the human brain.

AbstractPurposeThe inflow‐based vascular‐space‐occupancy (iVASO) MRI was originally developed in a single‐slice mode to measure arterial cerebral blood volume (CBVa). When vascular crushers are applied in iVASO, the signals can be sensitized predominantly to small pial arteries and arterioles. The purpose of this study is to perform a systematic optimization and evaluation of a 3D iVASO sequence on both 3 T and 7 T for the quantification of CBVa values in the human brain.MethodsThree sets of experiments were performed in three separate cohorts. (1) 3D iVASO MRI protocols were compared to single‐slice iVASO, and the reproducibility of whole‐brain 3D iVASO MRI was evaluated. (2) The effects from different vascular crushers in iVASO were assessed. (3) 3D iVASO MRI results were evaluated in arterial and venous blood vessels identified using ultrasmall‐superparamagnetic‐iron‐oxides–enhanced MRI to validate its arterial origin.Results3D iVASO scans showed signal‐to‐noise ratio (SNR) and CBVa measures consistent with single‐slice iVASO with reasonable intrasubject reproducibility. Among the iVASO scans performed with different vascular crushers, the whole‐brain 3D iVASO scan with a motion‐sensitized‐driven‐equilibrium preparation with two binomial refocusing pulses and an effective TE of 50 ms showed the best suppression of macrovascular signals, with a relatively low specific absorption rate. When no vascular crusher was applied, the CBVa maps from 3D iVASO scans showed large CBVa values in arterial vessels but well‐suppressed signals in venous vessels.ConclusionA whole‐brain 3D iVASO MRI scan was optimized for CBVa measurement in the human brain. When only microvascular signals are desired, a motion‐sensitized‐driven‐equilibrium–based vascular crusher with binomial refocusing pulses can be applied in 3D iVASO.