Muller, Olivia

AbstractPurposeProton treatment plan perturbation by common dental fixtures such as amalgams (Am) and porcelain‐fused‐to‐metal (PFM) crowns has, to date, been uncharacterized. Previous studies have been conducted to determine the physical effect of these materials within the beam path for single spots, but their effects on complex treatment plans and clinical anatomy have not yet been quantified. The present manuscript aims to study the effect of Am and PFM fixtures on proton treatment planning in a clinical setting.MethodsAn anthropomorphic phantom with removable tongue, maxilla, and mandible modules was simulated on a clinical computed tomography (CT) scanner. Spare maxilla modules were modified to include either a 1.5 mm depth central groove occlusal amalgam (Am) or a porcelain‐fused‐to‐metal (PFM) crown, implanted on the first right molar. Modified tongue modules were 3D printed to accommodate several axial or sagittal oriented pieces of EBT‐3 film. Clinically representative spot‐scanning proton plans were generated in Eclipse v.15.6 using the proton convolution superposition (PCS) algorithm v.15.6.06 using a multi‐field optimization (MFO) technique with the goal of delivering a uniform 54 Gy dose to a clinical target volume (CTV) typical of a base‐of‐tongue (BoT) treatment. A typical geometric beam arrangement of two anterior oblique (AO) beams and a posterior beam was employed. Plans optimized without any material overrides were delivered to the phantom A) without implants; B) with Am fixture; or C) with PFM crown. Plans were also reoptimized and delivered with inclusion of material overrides to equate relative stopping power of the fixture with that of a previously measured result.ResultsPlans exhibit slightly greater dose weight towards AO beams. The optimizer accounted for inclusion of fixture overrides by increasing beam weights to the beam closest to the implant. Film measurements exhibited cold spots directly within the beam path through the fixture in plans with and without overridden materials. Cold spots were somewhat mitigated in plans including overridden materials in the structure set but were not entirely eliminated. Cold spots associated with Am and PFM fixtures were quantified at 17% and 14% for plans without overrides, respectively, and 11% and 9% with using Monte Carlo simulation. Compared with film measurements and Monte Carlo simulation, the treatment planning system underestimates the dose shadowing effect in plans including material overrides.ConclusionsDental fixtures create a dose shadowing effect directly in line with the beam path through the material. This cold spot is partially mitigated by overriding the material to measured relative stopping powers. Due to uncertainties in modeling perturbation through the fixture, the magnitude of the cold spot is underestimated using the institutional TPS when compared to measurement and MC simulation.

AbstractWith complex head and neck diseases that closely approximate crucial organs or have advanced spread and cannot be surgically resected, intensity modulated proton beam radiotherapy is favored due to its superior dose targeting through magnetic manipulation of the proton energy. A radiation mask and an oral positioning device immobilize craniofacial, cervical, and oral structures for accurate and reliable radiation delivery. Widely available prefabricated thermoplastic oral positioning devices are manufactured in standardized forms and materials that unpredictably affect the proton beams’ pathways and range. This technique article showcases a workflow that combines analog and digital dental techniques to produce a customized 3D‐printed oral positioning device within 2 appointments.

AbstractAmyloidosis of the tongue can result in significant and irreversible alterations of tooth position and function due to prolonged application of imbalanced force on the teeth by the enlarged tongue. Due to the rarity of this oral form of systemic disease, little has been elucidated on management of the resulting impaired oral function. While surgery can address the size of the tongue, it carries significant morbidities, enlargement can recur, and does not address adverse tooth positioning. Prosthetic rehabilitation can more aptly restore oral function but it also needs to be tailored based on the patient's expectations and goals as well as biologic and mechanical parameters of treatment. This report discusses an effective and noninvasive application of a tooth‐supported, removable prosthesis with an onlay occlusal design to restore occlusion, speech, and esthetics in a patient with tongue‐based amyloidosis.