Zhao, Chunfeng

Background: Healing of the tendon-bone interface (TBI) after rotator cuff injury is limited, often leading to scar-mediated repair. Decellularized tendon fibrocartilage–bone composite (dTFBC) and bone marrow mesenchymal stem cell sheets (BMSCS) improve repair in preclinical models, but full scaffold encapsulation with mechanical preconditioning remains unexplored. Purpose: To evaluate TBI regeneration using mechanically preconditioned, BMSCS-encapsulated dTFBC scaffolds in a rabbit model. Study Design: Controlled laboratory study. Methods: A total of 48 male New Zealand White rabbits were randomized into 4 groups (n = 12 each): (1) standard repair (control); (2) repair with dTFBC; (3) repair with dTFBC-BMSCS; and (4) repair with mechanically preconditioned dTFBC-BMSCS (mdTFBC-BMSCS). Healing at 12 weeks was assessed via gross observation, histomorphological and immunohistochemical analyses, and biomechanical testing. Results: The mdTFBC-BMSCS group demonstrated a higher ultimate failure load (mean, 203.9 ± 65.6 N) than both the control (118 ± 37.4 N; P = .003) and dTFBC groups (127 ± 44.1 N; P = .008), with no significant difference between the 2 BMSCS-treated groups. Histological analysis revealed enhanced fibrocartilage formation, improved collagen fiber organization, and reduced inflammation infiltration at the TBI in the mdTFBC-BMSCS group. Immunohistochemical analysis showed greater collagen type 2 alpha 1 chain-, interleukin 10-, and arginase 1-positive areas in the mdTFBC-BMSCS group than in the control and dTFBC groups. Conclusion: Mechanically preconditioned, fully BMSCS-encapsulated dTFBC scaffolds promoted TBI regeneration, with enhanced cellular integration, fibrocartilage formation, and favorable biomechanical performance. Clinical Relevance: This biomimetic scaffold strategy may enhance biological healing and reduce the risk of retear after rotator cuff repair.

Chronic wounds remain a major unmet clinical challenge, often failing to progress to normal healing due to persistent inflammation, impaired angiogenesis, and cellular senescence. Exosomes have recently been investigated as promising acellular therapeutics capable of restoring intercellular communication and promoting tissue regeneration. Among these, the Purified Exosome Product (PEP) represents a next-generation, platelet-derived exosome formulation manufactured under Good Manufacturing Practice (GMP) conditions with high purity, stability, and reproducibility. This review summarizes the current advances in exosome-based chronic wound therapeutics and PEP delivery systems and their translational potentials. Incorporation of PEP into bioengineered carriers such as fibrin sealant, collagen scaffolds, and hyaluronic acid (HA) hydrogels enables localized and sustained exosome release, significantly prolonging therapeutic effects and improving regenerative outcomes. Fibrin-based PEP delivery achieved complete wound closure and functional skin regeneration in animal models, while collagen and HA-based systems showed promising results for injectable and dermatologic applications. Beyond its intrinsic healing effects, PEP may also serve as a nanocarrier for other drugs, offering a future direction in chronic wound management.

ABSTRACT Calcific tendinopathy is a common musculoskeletal disorder marked by calcium deposition within tendons, often accompanied by pain, impaired mobility, and in severe cases, ossification. However, the mechanisms underlying tendon mineralization remain poorly understood. In contrast to pathological human calcification, turkeys naturally develop tendon mineralization during growth without signs of inflammation or ossification. This study had two phases: an observational phase to assess onset and progression of calcification, and an interventional phase to evaluate the role of mechanical loading. In the observational phase, flexor tendons were collected from turkeys aged 1–16 weeks in a serial sacrifice study and analyzed by Von Kossa staining and biomechanical testing. Calcification began at 7 weeks, localized within organized collagen matrices, progressed through Weeks 8–14, and peaked by 16 weeks. In the interventional phase, nine female turkeys were randomized at 4 weeks into a transection group ( n = 3), sham group ( n = 3), and control group ( n = 3). Transection at the muscle–tendon junction eliminated mechanical loading. At 16 weeks, tendons were analyzed by histology, quantitative RT‐PCR, ICP‐MS, and biomechanical testing. Transected tendons showed a near‐complete absence of mineralization, reduced expression of osteogenic markers (osteopontin, osteocalcin, Runx‐2), and significantly lower calcium, magnesium, and phosphorus levels. Biomechanical testing indicated reduced stress relaxation, stiffness, and Young's modulus in the transected group. Tendon calcification in turkeys functioned as a mechanically regulated, nonpathological process. The study established a relevant model for early tendon mineralization and offered a basis for developing load‐dependent therapies for human tendon disease.

ABSTRACT Tendon adhesion is a major complication following tendon reconstruction surgery in the hand. Previous studies showed that a combination of hyaluronic acid (HA) and gelatin, covalently bound to the tendon surface, can provide a durable gliding surface to reduce adhesions in animal models both in‐vitro and in‐vivo. We have developed a similar product using good manufacturing practice (GMP) standards, in preparation for use in humans. This study aimed to examine the frictional properties and elastic modulus of the Manufactured Tendon Lubricant (MTL) when applied to an extrasynovial canine peroneus longus (PL) tendon in‐vitro. Twenty PL tendons along with the 2nd and 5th digits from adult canine forepaws, were obtained (mean age: 12 months, weight: 35 kg) from animals sacrificed in Institutional Animal Care and Use Committee (IACUC) approved protocols. Tendons were treated either with the MTL or saline solution, as a control. Eight tendons from each group (MTL vs saline‐treated) underwent friction testing, using a previously described protocol, followed by indentation testing to assess tendon elastic modulus (a marker of successful crosslinking). Two tendons from each group were not tested and were sent for scanning electron microscopy (SEM). The MTL group had significantly ( p < 0.001) lower friction and gliding resistance as well as higher elastic modulus of the PL tendons, compared to the saline group. This study demonstrates that MTL provides lubricating effects and fixation to the tendon surface and may be suitable for human testing.

Muscle stem cells (MuSCs) are essential for skeletal muscle regeneration, influenced by a complex interplay of mechanical, biochemical, and molecular cues. Properties of the extracellular matrix (ECM) such as stiffness and alignment guide stem cell fate through mechanosensitive pathways, where forces like shear stress translate into biochemical signals, affecting cell behavior. Aging introduces senescence which disrupts the MuSC niche, leading to reduced regenerative capacity via epigenetic alterations and metabolic shifts. Transplantation further challenges MuSC viability, often resulting in fibrosis driven by dysregulated fibro-adipogenic progenitors (FAPs). Addressing these issues, scaffold designs integrated with pharmacotherapy emulate ECM environments, providing cues that enhance graft functionality and endurance. These scaffolds facilitate the synergy between mechanotransduction and intracellular signaling, optimizing MuSC proliferation and differentiation. Innovations utilizing human pluripotent stem cell-derived myogenic progenitors and exosome-mediated delivery exploit bioactive properties for targeted repair. Additionally, 3D-printed and electrospun scaffolds with adjustable biomechanical traits tackle scalability in treating volumetric muscle loss. Advanced techniques like single-cell RNA sequencing and high-resolution imaging unravel muscle repair mechanisms, offering precise mapping of cellular interactions. Collectively, this interdisciplinary approach fortifies tissue graft durability and MuSC maintenance, propelling therapeutic strategies for muscle injuries and degenerative diseases.

AbstractThis study aimed to compare the clinically established autologous extrasynovial tendon graft to a newly developed tissue‐engineered allograft (Eng‐allograft) in terms of functional outcomes following flexor tendon reconstruction in a canine model. The second and fifth flexor digitorum profundus (FDP) tendons from 16 dogs were transected and repaired in Zone II. After 6 weeks of cage activity, the repaired tendons were intentionally ruptured, creating a clinically relevant model for reconstruction. The re‐ruptured FDP tendons were then reconstructed using either the clinically standard autologous extrasynovial tendon graft or the Eng‐allograft, which had been revitalized with autologous bone marrow‐derived mesenchymal stem cells (BMSCs) and synovialized using carbodiimide derivatized synovial fluid (cd‐SYN). Following 12 weeks of postoperative rehabilitation, the functional outcomes of the surgical digits were evaluated. The Eng‐allograft group exhibited improved digital function, including lower digit work of flexion and reduced adhesion status, while maintaining similar tendon gliding resistance compared to the autograft group. However, the failure load of both the distal and proximal host/graft conjunctions in the Eng‐allograft group was significantly lower than that of the autograft group with higher graft rupture at the host−graft junction. In conclusion, the decellularized allogenic intrasynovial tendon, when revitalized BMSCs and synovialized with cd‐SYN, demonstrates positive effects on digital function improvement and adhesion reduction. However, the healing at both proximal and distal graft/host junctions is far lower than the autograft. Further research is needed to enhance the healing capacity of allograft conjunctions, aiming to achieve a comparable level of healing seen with autografts.

AbstractChordae tendineae, referred to as heart tendinous cords, act as tendons connecting the papillary muscles to the valves in the heart. Their role is analogous to tendons in the musculoskeletal system. Despite being exposed to millions of cyclic tensile stretches over a human's lifetime, chordae tendineae rarely suffer from overuse injuries. On the other hand, musculoskeletal tendinopathy is very common and remains challenging in clinical treatment. The objective of this study was to investigate the mechanism behind the remarkable durability and resistance to overuse injuries of chordae tendineae, as well as to explore their effects on flexor tenocyte biology. The messenger RNA expression profiles of chordae tendineae were analyzed using RNA sequencing and verified by quantitative reverse transcription polymerase chain reaction and immunohistochemistry. Interestingly, we found that periostin (Postn) and fibroblast growth factor 7 (FGF7) were expressed at significantly higher levels in chordae tendineae, compared to flexor tendons. We further treated flexor tenocytes in vitro with periostin and FGF7 to examine their effects on the proliferation, migration, apoptosis, and tendon‐related gene expression of flexor tenocytes. The results displayed enhanced cell proliferation ability at an early stage and an antiapoptotic effect on tenocytes, while treated with periostin and/or FGF7 proteins. Furthermore, there was a trend of promoted tenocyte migration capability. These findings indicated that Postn and FGF7 may represent novel cytokines to target flexor tendon healing. Clinical significance: The preliminary discovery leads to a novel idea for treating tendinopathy in the musculoskeletal system using specific molecules identified from chordae tendineae.

AbstractSeveral tendon and ligament animal models were presented at the 2022 Orthopaedic Research Society Tendon Section Conference held at the University of Pennsylvania, May 5 to 7, 2022. A key objective of the breakout sessions at this meeting was to develop guidelines for the field, including for preclinical tendon and ligament animal models. This review summarizes the perspectives of experts for eight surgical small and large animal models of rotator cuff tear, flexor tendon transection, anterior cruciate ligament tear, and Achilles tendon injury using the framework: “Why, Who, What, Where, When, and How” (5W1H). A notable conclusion is that the perfect tendon model does not exist; there is no single gold standard animal model that represents the totality of tendon and ligament disease. Each model has advantages and disadvantages and should be carefully considered in light of the specific research question. There are also circumstances when an animal model is not the best approach. The wide variety of tendon and ligament pathologies necessitates choices between small and large animal models, different anatomic sites, and a range of factors associated with each model during the planning phase. Attendees agreed on some guiding principles including: providing clear justification for the model selected, providing animal model details at publication, encouraging sharing of protocols and expertise, improving training of research personnel, and considering greater collaboration with veterinarians. A clear path for translating from animal models to clinical practice was also considered as a critical next step for accelerating progress in the tendon and ligament field.

Allogenic tendons grafts sourced from intrasynovial tendons are often used for tendon reconstruction. Processing is achieved through repetitive freeze–thaw cycles followed by lyophilization. Soaking the lyophilized tendon in saline (0.9%) for 24 h is the standard practice for rehydration. However, data supporting saline rehydration over the use of other hydrating solutions are scant. The purpose of the current study was to compare the effects of different rehydration solutions on biomechanical properties of lyophilized tendon allograft. A total of 36 canine flexor digitorum profundus tendons were collected, five freeze–thaw cycles followed by lyophilization were performed for processing, and then divided into three groups rehydrated with either saline solution (0.9%), phosphate-buffered saline (PBS), or minimum essential medium (MEM). Flexural stiffness, tensile stiffness, and gliding friction were evaluated before and after allograft processing. The flexural moduli in both fibrous and fibrocartilaginous regions of the tendons were measured. After lyophilization and reconstitution, the flexural moduli of both the fibrocartilaginous and non-fibrocartilaginous regions of the tendons increase significantly in the saline and MEM groups (p < 0.05). Compared to the saline and MEM groups, the flexural moduli of the fibrocartilaginous and non-fibrocartilaginous regions of tendons rehydrated with PBS are significantly lower (p < 0.05). Tensile moduli of rehydrated tendons are significantly lower than those of fresh tendons for all groups (p < 0.05). The gliding friction of rehydrated tendons is significantly higher than that of fresh tendons in all groups (p < 0.05). There is no significant difference in either tensile moduli or gliding friction between tendons treated with different rehydration solutions. These results demonstrate that allograft reconstitution can be optimized through careful selection of hydrating solution and that PBS could be a better choice as the impact on flexural properties is lower.

The objective of this study was to examine the effect of pulling angle on time-zero mechanical properties of intact infraspinatus tendon or infraspinatus tendon repaired with the modified Mason-Allen technique in a canine model in vitro. Thirty-six canine shoulder samples were used. Twenty intact samples were randomly allocated into functional pull (135°) and anatomic pull (70°) groups (n = 10 per group). The remaining sixteen infraspinatus tendons were transected from the insertion and repaired using the modified Mason-Allen technique before being randomly allocated into functional pull or anatomic pull groups (n = 8 per group). Load to failure testing was performed on all specimens. The ultimate failure load and ultimate stress of the functional pulled intact tendons were significantly lower compared with anatomic pulled tendons (1310.2 ± 167.6 N vs. 1687.4 ± 228.2 N, p = 0.0005: 55.6 ± 8.4 MPa vs. 67.1 ± 13.3 MPa, p = 0.0334). For the tendons repaired with the modified Mason-Allen technique, no significant differences were observed in ultimate failure load, ultimate stress or stiffness between functional pull and anatomic pull groups. The variance of pulling angle had a significant influence on the biomechanical properties of the rotator cuff tendon in a canine shoulder model in vitro. Load to failure of the intact infraspinatus tendon was lower at the functional pulling position compared to the anatomic pulling position. This result indicates that uneven load distribution across tendon fibers under functional pull may predispose the tendon to tear. However, this mechanical character is not presented after rotator cuff repair using the modified Mason-Allen technique.