Citations

Background and aim Mechanical thrombectomy (MT) for large vessel occlusion often requires multiple passes to retrieve the entire thrombus load. In this multi-institutional study we sought to examine the composition of thrombus fragments retrieved with each pass during MT. Methods Patients who required multiple passes during thrombectomy were included. Histopathological evaluation of thrombus fragments retrieved from each pass was performed using Martius Scarlet Blue staining and the composition of each thrombus component including RBC, fibrin and platelet was determined using image analysis software. Results 154 patients underwent MT and 868 passes was performed which resulted in 263 thrombus fragments retrieval. The analysis of thrombus components per pass showed higher RBC, lower fibrin and platelet composition in the pass 1 and 2 when compared to pass 3 and passes 4 or more combined (P values <0.05). There were no significant differences between thrombus fragments retrieved in pass 1 and pass 2 in terms of RBC, WBC, fibrin, and platelet composition (P values >0.05). Similarly, when each composition of thrombus fragments retrieved in pass 3 and passes 4 or more combined were compared with each other, no significant difference was noted (P values >0.05). Conclusion Our findings confirm that thrombus fragments retrieved with each pass differed significantly in histological content. Fragments in the first passes were associated with lower fibrin and platelet composition compared to fragments retrieved in passes three and four or higher. Also, thrombus fragments retrieved after failed pass were associated with higher fibrin and platelet components.

Background To develop a preclinical thromboembolic occlusion model for studying revascularization strategies. Methods Clot analog with barium sulfate was injected into the distal aorta in 9 New Zealand white rabbits. The situation of aorta occlusion was compared among fibrin-rich (n=4), red blood cell (RBC)-rich (n=3), and whole blood clot analogs (n=2) using digital subtraction angiography. Arterial geometries, histologic features and circumferential stretch of the distal aorta in rabbits were compared with the common carotid artery in swine and the distal internal carotid artery (ICA) in humans. Aspiration thrombectomy and mechanical thrombectomy using a stent retriever were performed in two rabbits. Results The aortic bifurcation was occluded after a single delivery of clot in 4 cases. It was occluded after the second clot injection in the 5 remaining rabbits. Fragmentation of RBC-rich clots occurred during clot injection in 2 cases. The mean diameters of the distal aorta and right common iliac artery in rabbits were 3.7±0.4 and 2.8±0.3 mm, respectively; the mean diameters of human ICA, and first and second segments of the middle cerebral artery (M1, M2) were 3.6±0.4, 3.1±0.4, and 2.4±0.4 mm, respectively. Arterial revascularization was achieved in both rabbits. Geometric, mechanical and histological factors of the distal aorta in rabbit were more close to human distal ICA than swine carotid artery. Conclusion Arterial occlusion can be achieved at the aortic bifurcation in rabbits, which is comparable to human ICA bifurcation. This thrombectomy model has the potential to be used for testing of thrombectomy devices.

Background First pass effect (FPE) in mechanical thrombectomy is thought to be associated with good clinical outcomes. Objective To determine FPE rates as a function of thrombectomy technique and to compare clinical outcomes between patients with and without FPE. Methods In July 2020, a literature search on FPE (defined as modified Thrombolysis in Cerebral Infarction (TICI) 2c–3 after a single pass) and modified FPE (mFPE, defined as TICI 2b–3 after a single pass) and mechanical thrombectomy for stroke was performed. Using a random-effects meta-analysis, we evaluated the following outcomes for both FPE and mFPE: overall rates, rates by thrombectomy technique, rates of good neurologic outcome (modified Rankin Scale score ≤2 at day 90), mortality, and symptomatic intracerebral hemorrhage (sICH) rate. Results Sixty-seven studies comprising 16 870 patients were included. Overall rates of FPE and mFPE were 28% and 45%, respectively. Thrombectomy techniques shared similar FPE (p=0.17) and mFPE (p=0.20) rates. Higher odds of good neurologic outcome were found when we compared FPE with non-FPE (56% vs 41%, OR=1.78) and mFPE with non-mFPE (57% vs 44%, OR=1.73). FPE had a lower mortality rate (17% vs 25%, OR=0.62) than non-FPE. FPE and mFPE were not associated with lower sICH rate compared with non-FPE and non-mFPE (4% vs 18%, OR=0.41 for FPE; 5% vs 7%, OR=0.98 for mFPE). Conclusions Our findings suggest that approximately one-third of patients achieve FPE and around half of patients achieve mFPE, with equivalent results throughout thrombectomy techniques. FPE and mFPE are associated with better clinical outcomes.

Background Characterization of acute ischemic stroke (AIS) clots has typically focused on two-dimensional histological analysis of the thrombus. The three-dimensional (3D) architecture and distribution of components within emboli have not been fully investigated. The aim of this study was to examine the composition and microstructure of AIS clots using histology and serial block-face scanning electron microscopy (SBFSEM). Methods As part of the multi-institutional STRIP registry, 10 consecutive AIS emboli were collected from 10 patients treated by mechanical thrombectomy. Histological and immunohistochemical analysis was performed to determine clot composition. SBFSEM was used to assess the ultrastructural organization of the clots and specific features of individual components. Results Quantification of Martius Scarlett Blue stain identified fibrin (44.4%) and red blood cells (RBCs, 32.6%) as the main components. Immunohistochemistry showed a mean platelet and von Willebrand factor content of 23.9% and 11.8%, respectively. The 3D organization of emboli varied greatly depending on the region analyzed. RBC-rich areas were composed mainly of tightly packed RBCs deformed into polyhedrocytes with scant fibrin fibers interwoven between cells. The regions with mixed composition showed thick fibrin fibers along with platelets, white blood cells and RBC clusters. Fibrin-rich areas contained dense fibrin masses with sparse RBC. In three cases, the fibrin formed a grid-like or a sponge-like pattern, likely due to thrombolytic treatment. Segmentation showed that fibrin fibers were thinner and less densely packed in these cases. Conclusions 3D-SEM provides novel and potentially clinically relevant information on clot components and ultrastructure which may help to inform thrombolytic treatment and medical device design.

AbstractEmbolectomy is one of the emergency procedures performed to remove emboli. Assessing the composition of human blood clots is an important diagnostic factor and could provide guidance for an appropriate treatment strategy for interventional physicians. Immunostaining has been used to identity compositions of clots as a gold‐standard procedure, but it is time‐consuming and cannot be performed in situ. Here, we proposed that the optical attenuation coefficient of optical coherence tomography (OCT) can be a reliable indicator as a new imaging modality to differentiate clot compositions. Fifteen human blood clots with multiple red blood cell (RBC) compositions from 21% to 95% were prepared using healthy human whole blood. A homogeneous gelatin phantom experiment and numerical simulation based on the Lambert–Beer's law were examined to verify the validity of the attenuation coefficient estimation. The results displayed that optical attenuation coefficients were strongly correlated with RBC compositions. We reported that attenuation coefficients could be a promising biomarker to guide the choice of an appropriate interventional device in a clinical setting and assist in characterizing blood clots.

Background Initial studies investigating correlations between stroke etiology and clot composition are conflicting and do not account for clot size as determined by area. Radiological studies have shown that cardioembolic strokes are associated with shorter clot lengths and lower clot burden than non-cardioembolic clots. Objective To report the relationship between stroke etiology, extracted clot area, and histological composition at each procedural pass. Methods As part of the multi-institutional RESTORE Registry, the Martius Scarlett Blue stained histological composition and extracted clot area of 612 per-pass clots retrieved from 441 patients during mechanical thrombectomy procedures were quantified. Correlations with clinical and procedural details were investigated. Results Clot composition varied significantly with procedural passes; clots retrieved in earlier passes had higher red blood cell content (H4=11.644, p=0.020) and larger extracted clot area (H4=10.730, p=0.030). Later passes were associated with significantly higher fibrin (H4=12.935, p=0.012) and platelets/other (H4=15.977, p=0.003) content and smaller extracted clot area. Large artery atherosclerotic (LAA) clots were significantly larger in the extracted clot area and more red blood cell-rich than other etiologies in passes 1–3. Cardioembolic and cryptogenic clots had similar histological composition and extracted clot area across all procedural passes. Conclusion LAA clots are larger and associated with a large red blood cell-rich extracted clot area, suggesting soft thrombus material. Cardioembolic clots are smaller in the extracted clot area, consistent in composition and area across passes, and have higher fibrin and platelets/other content than LAA clots, making them stiffer clots. The per-pass histological composition and extracted clot area of cryptogenic clots are similar to those of cardioembolic clots, suggesting similar formation mechanisms.