Citations

Clear

122 citation(s) found for "Morris, Jonathan".

Three-Dimensional-Printed Liver Model Helps Learners Identify Hepatic Subsegments: A Randomized-Controlled Cross-Over Trial
Chedid, Victor , Kamath, A. , Knudsen, John M. , Frimannsdottir, Katrin R., Yost, Kathleen J. , Geske, Jennifer R. , Taner, Timuçin , Matsumoto, Jane M., Kamath, Patrick S. , Chedid, Victor G , Kamath, Amika A, M Knudsen, John, Frimannsdottir, Katrin, R Geske, Jennifer, Geske, Jennifer , Morris, Jonathan M.

Mayo Clinic

American Journal of Gastroenterology | September 25, 2020 | Volume: 115 | Issue: 11 | Pages: 1906-1910

10.14309/ajg.0000000000000958 | PMID 33156110 Get It

INTRODUCTION: The purpose of this study was to find out whether 3-dimensional (3D)–printed models improved the learners' ability to identify liver segments. METHODS: A total of 116 physicians from 3 disciplines were tested in a cross-over trial at baseline and after teaching with 3D models and 2-dimensional (2D) images. Adjusted multilevel-mixed models were used to compare scores at baseline and after 3D and 2D. RESULTS: Accuracy in identifying hepatic segments was higher with 3D first than 2D (77% vs 69%; P = 0.05) and not significantly improved by a combination of 3D and 2D. Increased confidence in segment identification was highest in trainees after 3D ( P = 0.04). DISCUSSION: 3D-printed models facilitate learning hepatic segmental anatomy.
A Model of Success: Incorporating 3D-Printed Models of Skull Base Pathology for Surgical Approach Planning
Perry, Avital , Graffeo, Christopher S. , Driscoll, Colin L. W., Link, Michael J., Carlstrom, Lucas P. , Link, Michael J. , Morris, Jonathan M.

Mayo Clinic

Journal of Neurological Surgery Part B: Skull Base | February 5, 2020 | Volume: No volume available | Issue: No issue available | Pages: No page available

10.1055/s-0040-1702532 Get It

A Model Is Worth 1,000 Pictures: Applications of 3D-Modeling in Skull Base Surgery Neuroanatomy Education
Graffeo, Christopher S. , Perry, Avital , Link, Michael J., Morris, Jonathan, Carlstrom, Lucas P. , Link, Michael J.

Mayo Clinic

Journal of Neurological Surgery Part B: Skull Base | February 5, 2020 | Volume: No volume available | Issue: No issue available | Pages: No page available

10.1055/s-0040-1702387 Get It

Three-Dimensional Printing: Current Use in Rhinology and Endoscopic Skull Base Surgery
Low, Christopher M. , Matsumoto, Jane S., Stokken, Janalee K., O’Brien, Erin K. , O'Brien, Erin K., O'Brien, Erin K , Morris, Jonathan M. , Price, Daniel L. , Matsumoto, Jane M., Choby, Garret

Mayo Clinic

American Journal of Rhinology & Allergy | August 5, 2019 | Volume: 33 | Issue: 6 | Pages: 770-781

10.1177/1945892419866319 | PMID 31382761 Get It

Background In the discipline of rhinology and endoscopic skull base surgery (ESBS), 3-dimensional (3D) printing has found meaningful application in areas including preoperative surgical planning as well as in surgical education. However, its scope of use may be limited due to the perception among surgeons that there exists a prohibitively high initial investment in resources and time to acquire the requisite technical expertise. Nevertheless, given the ever decreasing cost of advancing technology coupled with the need to understand the complex spatial relationships of the paranasal sinuses and skull base, the use of 3D printing in rhinology and ESBS is poised to blossom. Objective Help the reader identify current or potential future uses of 3D printing technology relevant to their rhinologic clinical or educational practice. Methods A review of published literature relating to 3D printing in rhinology and ESBS was performed. Results Results were reviewed and organized into 5 overarching categories including an overview of the 3D printing process as well as applications of 3D printing including (1) surgical planning, (2) custom prosthetics and implants, (3) patient education, and (4) surgical teaching and assessment. Conclusion In the discipline of rhinology and ESBS, 3D printing finds use in the areas of presurgical planning, patient education, prosthesis creation, and trainee education. As this technology moves forward, these products will be more broadly available to providers in the clinical and educational setting. The possible applications are vast and have great potential to positively impact surgical training, patient satisfaction, and most importantly, patient outcomes.
Use of 3D‐Printed and 2D‐Illustrated International Frontal Sinus Anatomy Classification Anatomic Models for Resident Education
Low, Christopher M. , Matsumoto, Jane S., Stokken, Janalee K., O’Brien, Erin K. , O'Brien, Erin K., O'Brien, Erin K , Morris, Jonathan M. , Matsumoto, Jane M., Choby, Garret

Mayo Clinic

Otolaryngology–Head and Neck Surgery | July 9, 2019 | Volume: 161 | Issue: 4 | Pages: 705-713

10.1177/0194599819860832 | PMID 31284833 Get It

ObjectiveTo examine the impact of 2‐dimensional (2D) illustrations and 3‐dimensonal (3D)–printed anatomic models of the frontal sinuses according to the International Frontal Sinus Anatomy Classification in the education of otolaryngology and radiology residents.Study DesignA crossover study design with half of the study participants randomized to the 2D illustration intervention first and the other half randomized to the 3D‐printed model first.SettingRegularly scheduled resident didactic lectures at a tertiary care center.Subjects and MethodsForty‐one otolaryngology and radiology residents were assessed with pre‐ and postintervention questionnaires that included subjective and objective methods of assessment.ResultsOverall, there was a statistically significant improvement in total number of answers correct and in confidence score between the pre‐ and postintervention assessments (P <. 0001). The primary outcome of order of intervention (ie, 2D → 3D vs 3D → 2D) did not result in statistically significant differences in postevaluation scores. In regard to the secondary outcome of learner preference for educational modality, radiology residents favored the 2D illustrations to understand anatomic relationships, while otolaryngology residents preferred the 3D model to be more helpful in surgical planning (P =. 0075).ConclusionThere is no difference between 2D‐illustrated and 3D‐printed International Frontal Sinus Anatomy Classification anatomic models in overall educational outcome, despite the preference of learners. Together, these models can be used as helpful tools in frontal sinus education for otolaryngology and radiology trainees.
Construction of three-dimensional printed anatomic models for frontal sinus education
Low, Christopher M. , Viozzi, Megan, Choby, Garret , Morris, Jonathan M.

Mayo Clinic

The Neuroradiology Journal | May 13, 2019 | Volume: 33 | Issue: 1 | Pages: 80-84

10.1177/1971400919849781 | PMID 31081452 Get It

Background The anatomy of the frontal sinus can pose a challenge for many neuroradiolgists and otolaryngologists, especially trainees. While much of resident education occurs in didactics, self-study or in the operating room, studies suggest that some trainees prefer hands-on learning. Three-dimensional (3D) printing technology provides users the opportunity to make customizable low-cost objects that provide tactile learning—a learning modality that may be preferable in education. Methods Three-dimensional printed models of frontal sinus anatomy based on selected patient computed tomography scans that represent various air cells according to the International Frontal Sinus Classification (IFAC) as different colored solid structures were printed using binder jetting. Results Seven unique de-identified patient scans were selected as the basis for the models so that all frontal cell types described in the IFAC scheme are represented between all 3D printed models. Conclusion This paper describes the technology and process necessary to create these models.
That which Is Unseen: A 3D-Printed Case-Based Didactic Approach to Teaching Pediatric Cerebrovascular Neurosurgery
Perry, Avital , Oushy, Soliman , Graffeo, Christopher S. , Link, Michael , Brinjikji, Waleed , Morris, Jonathan, Oushy, Soliman H , Carlstrom, Lucas P. , Daniels, David

Mayo Clinic

Journal of Neurological Surgery Part B: Skull Base | March 6, 2019 | Volume: No volume available | Issue: No issue available | Pages: No page available

10.1055/s-0039-1679794 Get It

3D Printing for Complex Cranial Education: Skull Base Tumor Case Illustrations
Graffeo, Christopher S. , Perry, Avital , Link, Michael , Morris, Jonathan, Carlstrom, Lucas P.

Mayo Clinic

Journal of Neurological Surgery Part B: Skull Base | March 6, 2019 | Volume: No volume available | Issue: No issue available | Pages: No page available

10.1055/s-0039-1679570 Get It

Efficacy and Safety of Ablative Therapy in the Treatment of Patients with Metastatic Pheochromocytoma and Paraganglioma
Kohlenberg, Jacob , Welch, Brian T. , Hamidi, Oksana , Callstrom, Matthew R. , Morris, Jonathan M. , Welch, Brian, Callstrom, Matthew, Hamidi, Oksana , Morris, Jonathan , Šprung, Juraj , Bancos, Irina , Young, William F.

Mayo Clinic

Cancers | February 7, 2019 | Volume: 11 | Issue: 2 | Pages: 195

10.3390/cancers11020195 | PMID 30736463 Get It

Metastatic pheochromocytoma and paraganglioma (PPGL) are incurable neuroendocrine tumors. The goals of treatment include palliating symptoms and reducing tumor burden. Little is known about the use of radiofrequency ablation (RFA), cryoablation (CRYO), and percutaneous ethanol injection (PEI) to treat metastatic PPGL. We performed a retrospective study of patients age 17 years and older with metastatic PPGL who were treated with ablative therapy at Mayo Clinic, USA, between June 14, 1999 and November 14, 2017. Our outcomes measures were radiographic response, procedure-related complications, and symptomatic improvement. Thirty-one patients with metastatic PPGL had 123 lesions treated during 42 RFA, 23 CRYO, and 4 PEI procedures. The median duration of follow-up was 60 months (range, 0–163 months) for non-deceased patients. Radiographic local control was achieved in 69/80 (86%) lesions. Improvement in metastasis-related pain or symptoms of catecholamine excess was achieved in 12/13 (92%) procedures. Thirty-three (67%) procedures had no known complications. Clavien-Dindo Grade I, II, IV, and V complications occurred after 7 (14%), 7 (14%), 1 (2%), and 1 (2%) of the procedures, respectively. In patients with metastatic PPGL, ablative therapy can effectively achieve local control and palliate symptoms.
Procedural predictors of epidural blood patch efficacy in spontaneous intracranial hypotension
Pagani-Estévez, Gabriel L., Cutsforth‐Gregory, Jeremy K. , Mokri, Bahram, Piepgras, David G., Mauck, William D. , Eldrige, Jason S. , Watson, James C. , Morris, Jonathan M.

Mayo Clinic

Regional Anesthesia & Pain Medicine | January 13, 2019 | Volume: 44 | Issue: 2 | Pages: 212-220

10.1136/rapm-2018-000021 | PMID 30636714 Get It

Background and objective Epidural blood patch (EBP) is a safe and effective treatment for spontaneous intracranial hypotension (SIH), but clinical and procedural variables that predict EBP efficacy remain nebulous. Methods This study is an institutional review board-approved retrospective case series with dichotomized EBP efficacy defined at 3 months. The study included 202 patients receiving 604 EBPs; iatrogenic cerebrospinal fluid leaks were excluded. Results Of the EBPs, 473 (78%) were single-level, 349 (58%) lumbar, 75 (12%) bilevel, and 56 (9%) multilevel (≥3 levels). Higher volume (OR 1.64; p<0.0001), bilevel (3.17, 1.91–5.27; p<0.0001), and multilevel (117.3, 28.04–490.67; p<0.0001) EBP strategies predicted greater efficacy. Only volume (1.64, 1.47–1.87; p<0.0001) remained significant in multivariate analysis. Site-directed patches were more effective than non-targeted patches (8.35, 0.97–72.1; p=0.033). Lower thoracic plus lumbar was the most successful bilevel strategy, lasting for a median of 74 (3–187) days. Conclusions In this large cohort of EBP in SIH, volume, number of spinal levels injected, and site-directed strategies significantly correlated with greater likelihood of first EBP efficacy. Volume and leak site coverage likely explain the increased efficacy with bilevel and multilevel patches. In patients with cryptogenic leak site, and either moderate disability, negative prognostic brain MRI findings for successful EBP, or failed previous lumbar EBP, a low thoracic plus lumbar bilevel EBP strategy is recommended. Multilevel EBP incorporating transforaminal administration and fibrin glue should be considered in patients refractory to bilevel EBP. An algorithmic approach to treating SIH is proposed.