Citations

Introduction Angio-Seal is a commonly used device for femoral hemostasis in neuroendovascular procedures. This meta-analysis investigates of the safety and efficacy of Angio-Seal in patients undergoing endovascular neurointerventional procedures. Methods A systematic review and meta-analysis on all studies evaluating the Angio-Seal device in neurointerventional procedures from inception through 2020 were performed. We studied rates of groin hematoma, retroperitoneal hematoma, pseudoaneurysm, ipsilateral DVT, and ischemic complications. Meta-analysis was performed using the random-effects model. Results 13 studies were included in our analysis. 2250 patients with 104 complications were found {4.5% (95% CI, 2.7%–6.3%)}. Of these complications, groin hematoma was the most common with a rate of 2.4% (95% CI, 1.1%–3.6%). Retroperitoneal hematoma {0.3% (95% CI, 0%–0.5%)}, pseudo-aneurysm {0.5% (95% CI, 0.2%–0.8%), and ipsilateral DVT {0.3% (95% CI, 0.1%–0.7%) were also not in negligible rate. The rate of other complications were as follows: vessel occlusion/stenosis; 0.2% (95% CI, 0%–0.4%), vascular surgery; 0.2% (95% CI, 0%–0.5%), and infection; 0.2% (95% CI, 0%–0.5%). One patient died as result of hemorrhagic complications {0.1% (95% CI, 0%–0.3%)}. Use of anticoagulant/antiplatelet therapy was found to be positively correlated with high risk of any groin complication and groin hematoma (p ≤ .05). Female gender was associated with high risk of ipsilateral DVT (p ≤ .05). Interestingly, large sheath size was associated with low risk of groin hematoma (p ≤ .05). Conclusion The safety and efficacy rate of Angio-Seal was approximately 95%. The most common complication was groin hematoma. Serious complications including retroperitoneal hematoma and femoral artery occlusion were rare.

Background To develop a preclinical thromboembolic occlusion model for studying revascularization strategies. Methods Clot analog with barium sulfate was injected into the distal aorta in 9 New Zealand white rabbits. The situation of aorta occlusion was compared among fibrin-rich (n=4), red blood cell (RBC)-rich (n=3), and whole blood clot analogs (n=2) using digital subtraction angiography. Arterial geometries, histologic features and circumferential stretch of the distal aorta in rabbits were compared with the common carotid artery in swine and the distal internal carotid artery (ICA) in humans. Aspiration thrombectomy and mechanical thrombectomy using a stent retriever were performed in two rabbits. Results The aortic bifurcation was occluded after a single delivery of clot in 4 cases. It was occluded after the second clot injection in the 5 remaining rabbits. Fragmentation of RBC-rich clots occurred during clot injection in 2 cases. The mean diameters of the distal aorta and right common iliac artery in rabbits were 3.7±0.4 and 2.8±0.3 mm, respectively; the mean diameters of human ICA, and first and second segments of the middle cerebral artery (M1, M2) were 3.6±0.4, 3.1±0.4, and 2.4±0.4 mm, respectively. Arterial revascularization was achieved in both rabbits. Geometric, mechanical and histological factors of the distal aorta in rabbit were more close to human distal ICA than swine carotid artery. Conclusion Arterial occlusion can be achieved at the aortic bifurcation in rabbits, which is comparable to human ICA bifurcation. This thrombectomy model has the potential to be used for testing of thrombectomy devices.

OBJECTIVE Endovascular removal of emboli causing large vessel occlusion (LVO)–related stroke utilizing suction catheter and/or stent retriever technologies or thrombectomy is a new standard of care. Despite high recanalization rates, 40% of stroke patients still experience poor neurological outcomes as many cases cannot be fully reopened after the first attempt. The development of new endovascular technologies and techniques for mechanical thrombectomy requires more sophisticated testing platforms that overcome the limitations of phantom-based simulators. The authors investigated the use of a hybrid platform for LVO stroke constructed with cadaveric human brains. METHODS A test bed for embolic occlusion of cerebrovascular arteries and mechanical thrombectomy was developed with cadaveric human brains, a customized hydraulic system to generate physiological flow rate and pressure, and three types of embolus analogs (elastic, stiff, and fragment-prone) engineered to match mechanically and phenotypically the emboli causing LVO strokes. LVO cases were replicated in the anterior and posterior circulation, and thrombectomy was attempted using suction catheters and/or stent retrievers. RESULTS The test bed allowed radiation-free visualization of thrombectomy for LVO stroke in real cerebrovascular anatomy and flow conditions by transmural visualization of the intraluminal elements and procedures. The authors were able to successfully replicate 105 LVO cases with 184 passes in 12 brains (51 LVO cases and 82 passes in the anterior circulation, and 54 LVO cases and 102 passes in the posterior circulation). Observed recanalization rates in this model were graded using a Recanalization in LVO (RELVO) scale analogous to other measures of recanalization outcomes in clinical use. CONCLUSIONS The human brain platform introduced and validated here enables the analysis of artery-embolus-device interaction under physiological hemodynamic conditions within the unmodified complexity of the cerebral vasculature inside the human brain.

Background First pass effect (FPE) in mechanical thrombectomy is thought to be associated with good clinical outcomes. Objective To determine FPE rates as a function of thrombectomy technique and to compare clinical outcomes between patients with and without FPE. Methods In July 2020, a literature search on FPE (defined as modified Thrombolysis in Cerebral Infarction (TICI) 2c–3 after a single pass) and modified FPE (mFPE, defined as TICI 2b–3 after a single pass) and mechanical thrombectomy for stroke was performed. Using a random-effects meta-analysis, we evaluated the following outcomes for both FPE and mFPE: overall rates, rates by thrombectomy technique, rates of good neurologic outcome (modified Rankin Scale score ≤2 at day 90), mortality, and symptomatic intracerebral hemorrhage (sICH) rate. Results Sixty-seven studies comprising 16 870 patients were included. Overall rates of FPE and mFPE were 28% and 45%, respectively. Thrombectomy techniques shared similar FPE (p=0.17) and mFPE (p=0.20) rates. Higher odds of good neurologic outcome were found when we compared FPE with non-FPE (56% vs 41%, OR=1.78) and mFPE with non-mFPE (57% vs 44%, OR=1.73). FPE had a lower mortality rate (17% vs 25%, OR=0.62) than non-FPE. FPE and mFPE were not associated with lower sICH rate compared with non-FPE and non-mFPE (4% vs 18%, OR=0.41 for FPE; 5% vs 7%, OR=0.98 for mFPE). Conclusions Our findings suggest that approximately one-third of patients achieve FPE and around half of patients achieve mFPE, with equivalent results throughout thrombectomy techniques. FPE and mFPE are associated with better clinical outcomes.

Purpose To assess whether an asymmetry exists in the prevalence of carotid artery intraplaque hemorrhage (IPH) between right- and left-sided arteries. Materials and methods The records of all patients with atherosclerotic carotid artery disease that underwent neck magnetic resonance angiography imaging with high-resolution plaque sequences between 2017 and 2020 at our institution were retrospectively reviewed. The prevalence of stenosis and IPH was determined for all patients and compared between the left and right carotid arteries of those with unilateral anterior circulation ischemic strokes. Multiple regression analysis was performed to determine potential independent associations of IPH laterality with ischemic strokes. Results A total of 368 patients were included overall and 241 were male (65.4%). There were a total of 125 asymptomatic patients and 211 patients with unilateral anterior circulation ischemic strokes. Of patients with ischemic strokes, 55.5% had left-sided strokes compared with 44.5% who had right-sided strokes ( p = 0.03). Patients with left-sided strokes had a higher prevalence of ipsilateral IPH than those with right-sided strokes (64.1% versus 36.2%, p < 0.0001), despite similar degrees of stenosis. Both age (odds ratio (OR): 1.0; 95% confidence interval (CI): 1.0–1.1; p = 0.007) and the presence of left-sided IPH (OR: 3.2; 95% CI: 1.5–6.8; p = 0.003) were independently associated with unilateral ischemic strokes. Conclusions Left-sided plaques more frequently have IPH and may be more likely to result in ipsilateral ischemic strokes compared with right-sided plaques. The underlying mechanism of asymmetric distribution of IPH between right and left carotids remains unclear.

Abstract The severe acute respiratory syndrome coronavirus 2 pandemic of 2019 to 2020 has resulted in multiple hospitalizations, deaths, and economic hardships worldwide. Although respiratory involvement in patients with coronavirus disease 2019 ( COVID ‐19) is well known, the potential cardiovascular and cerebrovascular manifestations are less understood. We performed a PubMed and Google Scholar search and reviewed relevant literature on COVID ‐19 and cardiovascular system involvement. Severe acute respiratory syndrome coronavirus 2 possesses high affinity for angiotensin‐converting enzyme 2 receptor, which is highly concentrated in the lungs and cardiovascular tissue, thereby provoking concern for cardiovascular involvement in COVID ‐19 cases. Preexisting cardiovascular and cerebrovascular disease has been shown in previous reports to be a risk factor for severe infection. On the basis of our review of published studies, COVID ‐19 patients may be more likely to experience acute cardiac injury, arrhythmia, coagulation defects, and acute stroke and are likely to have poorer outcomes as a result. As the COVID ‐19 pandemic continues, more data about potential cardiovascular and cerebrovascular manifestations of the disease are required.

OBJECTIVE The development of new endovascular technologies and techniques for mechanical thrombectomy in stroke has greatly relied on benchtop simulators. This paper presents an affordable, versatile, and realistic benchtop simulation model for stroke. METHODS A test bed for embolic occlusion of cerebrovascular arteries and mechanical thrombectomy was developed with 3D-printed and commercially available cerebrovascular phantoms, a customized hydraulic system to generate physiological flow rate and pressure, and 2 types of embolus analogs (elastic and fragment-prone) capable of causing embolic occlusions under physiological flow. RESULTS The test bed was highly versatile and allowed realistic, radiation-free mechanical thrombectomy for stroke due to large-vessel occlusion with rapid exchange of geometries and phantom types. Of the transparent cerebrovascular phantoms tested, the 3D-printed phantom was the easiest to manufacture, the glass model offered the best visibility of the interaction between embolus and thrombectomy device, and the flexible model most accurately mimicked the endovascular system during device navigation. None of the phantoms modeled branches smaller than 1 mm or perforating arteries, and none underwent realistic deformation or luminal collapse from device manipulation or vacuum. The hydraulic system created physiological flow rate and pressure leading to iatrogenic embolization during thrombectomy in all phantoms. Embolus analogs with known fabrication technique, structure, and tensile strength were introduced and consistently occluded the middle cerebral artery bifurcation under physiological flow, and their interaction with the device was accurately visualized. CONCLUSIONS The test bed presented in this study is a low-cost, comprehensive, realistic, and versatile platform that enabled high-quality analysis of embolus–device interaction in multiple cerebrovascular phantoms and embolus analogs.

OBJECTIVE This study’s purpose was to improve understanding of the forces driving the complex mechanical interaction between embolic material and current stroke thrombectomy devices by analyzing the histological composition and strength of emboli retrieved from patients and by evaluating the mechanical forces necessary for retrieval of such emboli in a middle cerebral artery (MCA) bifurcation model. METHODS Embolus analogs (EAs) were generated and embolized under physiological pressure and flow conditions in a glass tube model of the MCA. The forces involved in EA removal using conventional endovascular techniques were described, analyzed, and categorized. Then, 16 embolic specimens were retrieved from 11 stroke patients with large-vessel occlusions, and the tensile strength and response to stress were measured with a quasi-static uniaxial tensile test using a custom-made platform. Embolus compositions were analyzed and quantified by histology. RESULTS Uniaxial tension on the EAs led to deformation, elongation, thinning, fracture, and embolization. Uniaxial tensile testing of patients’ emboli revealed similar soft-material behavior, including elongation under tension and differential fracture patterns. At the final fracture of the embolus (or dissociation), the amount of elongation, quantified as strain, ranged from 1.05 to 4.89 (2.41 ± 1.04 [mean ± SD]) and the embolus-generated force, quantified as stress, ranged from 63 to 2396 kPa (569 ± 695 kPa). The ultimate tensile strain of the emboli increased with a higher platelet percentage, and the ultimate tensile stress increased with a higher fibrin percentage and decreased with a higher red blood cell percentage. CONCLUSIONS Current thrombectomy devices remove emboli mostly by applying linear tensile forces, under which emboli elongate until dissociation. Embolus resistance to dissociation is determined by embolus strength, which significantly correlates with composition and varies within and among patients and within the same thrombus. The dynamic intravascular weakening of emboli during removal may lead to iatrogenic embolization.