Citations

Abstract Introduction Ki-67 is often used as a proliferation index to evaluate how aggressive a tumor is and its likelihood of recurrence. Vestibular schwannomas (VS) are a unique benign pathology that lends itself well to evaluation with Ki-67 as a potential marker for disease recurrence or progression following surgical resection. Methods All English language studies of VSs and Ki-67 indices were screened. Studies were considered eligible for inclusion if they reported series of VSs undergoing primary resection without prior irradiation, with outcomes including both recurrence/progression and Ki-67 for individual patients. For published studies reporting pooled Ki-67 index data without detailed by-patient values, we contacted the authors to request data sharing for the current meta-analysis. Studies reporting a relationship between Ki-67 index and clinical outcomes in VS for which detailed patients' outcomes or Ki-67 indices could not be obtained were incorporated into the descriptive analysis, but excluded from the formal (i.e., quantitative) meta-analysis. Results A systematic review identified 104 candidate citations of which 12 met inclusion criteria. Six of these studies had accessible patient-specific data. Individual patient data were collected from these studies for calculation of discrete study effect sizes, pooling via random-effects modeling with restricted maximum likelihood, and meta-analysis. The standardized mean difference in Ki-67 indices between those with and without recurrence was calculated as 0.79% (95% confidence interval [CI]: 0.28–1.30; p = 0.0026). Conclusion Ki-67 index may be higher in VSs that demonstrate recurrence/progression following surgical resection. This may represent a promising means of evaluating tumor recurrence and potential need for early adjuvant therapy for VSs.

Abstract Introduction Although endonasal endoscopic approaches (EEA) to the orbit have been previously reported, a didactic resource for educating neurosurgery and otolaryngology trainees regarding the pertinent anatomy, techniques, and decision-making pearls is lacking. Methods Six sides of three formalin-fixed, color latex–injected cadaveric specimens were dissected using 4-mm 0- and 30-degree rigid endoscopes, as well as standard endoscopic equipment, and a high-speed surgical drill. The anatomical dissection was documented in stepwise three-dimensional (3D) endoscopic images. Following dissection, representative case applications were reviewed. Results EEA to the orbit provides excellent access to the medial and inferior orbital regions. Key steps include positioning and preoperative considerations, middle turbinate medialization, uncinate process and ethmoid bulla removal, complete ethmoidectomy, sphenoidotomy, maxillary antrostomy, lamina papyracea resection, orbital apex and optic canal decompression, orbital floor resection, periorbita opening, dissection of the extraconal fat, and final exposure of the orbit contents via the medial-inferior recti corridor. Conclusion EEA to the orbit is challenging, in particular for trainees unfamiliar with nasal and paranasal sinus anatomy. Operatively oriented neuroanatomy dissections are crucial didactic resources in preparation for practical endonasal applications in the operating room (OR). This approach provides optimal exposure to the inferior and medial orbit to treat a wide variety of pathologies. We describe a comprehensive step-by-step curriculum directed to any audience willing to master this endoscopic skull base approach.

Abstract BACKGROUND The incidence of brain metastasis is approximately 200,000 worldwide annually. Stereotactic radiation therapy of post-operative cavity reduces local recurrence. Surgical cavity size changes significantly with 96.5% demonstrating volumetric change during post-operative period. We sought to define the optimal time interval that preserved the volumetric dimensions between the post-surgical MRI and the CT simulation used for stereotactic radiosurgery planning. METHODS Seven patients with brain metastasis that underwent surgical resection and stereotactic radiation treatment at Albany Medical Center from February 2019 to April 2020 were included in the study. A total of 8 target lesions were included. Brain lab planning system was used for contouring the target volume. A postoperative MRI within 24-48 hours after surgery was obtained. 3 patients required an additional interim MRI 16-50 days after surgery. The planning CT simulation was performed 2 days prior and up to 15 days after the post-operative/interim MRI and target volumes were compared. RESULTS The average volume of the post-surgical cavity contoured by the neurosurgeons on the post-operative/interim MRI was 15.96 cc (± 7.79 cc, range of 6.54 -24.9 cc). The average volume of the post-surgical cavity contoured by the radiation oncologists on the planning CT was 15.71 (± 7.49 cc, range of 6.53 -24.31 cc). There was no noticeable change in volume size between post-operative/interim MRI and planning CT up to the period of 15 days. LIMITATION This was a retrospective pilot study with a small sample size and patients recruited from a single center. CONCLUSION There is no change in size of the cavity volume for up to 15 days between post-operative/interim MRI and planning CT. This knowledge will help understand the optimal time interval between post-operative MRI and CT simulation for the stereotactic radiation therapy planning.

Abstract Background Despite the use of vascularized intranasal flaps, endoscopic endonasal posterior fossa defects remain surgically challenging with high rates of postoperative cerebrospinal fluid leak. Objective The aim of the study is to describe a novel surgical technique that allows complete drilling of the clivus and exposure of the craniovertebral junction with preservation of the nasopharynx. Methods Two formalin-fixed latex-injected anatomical specimens were used to confirm feasibility of the technique. Two surgical approaches were used: sole endoscopic endonasal approach and transnasion approach. The sole endonasal approach was used in a patient with a petroclival meningioma. Results In both anatomical dissections, the inferior clivectomy with exposure of the foramen magnum was achieved with a sole endoscopic endonasal approach. The addition of the transnasion approach helped to complete drilling of the inferior border of the foramen magnum and exposure of the arch of C1. Conclusion This study shows the anatomical feasibility of total clivectomy and exposure of the craniovertebral junction with preservation of the nasopharynx. A more favorable anatomical posterior fossa defect for the reconstruction is achieved with this technique. Further clinical studies are needed to assess if this change would impact the postoperative CSF leak rate.

Abstract Introduction The middle fossa (MF) approaches encompass a group of versatile surgical accesses to pathologies in the MF, internal auditory canal (IAC), and superomedial aspect of the posterior fossa. Although many descriptions of the MF approaches have been published, a practical surgical guide that allows an easy understanding for Skull Base trainees is needed. Methods Three formalin-fixed, colored-injected specimens were dissected under microscopic magnification (six sides). A MF craniotomy followed by IAC drilling was performed on three sides, and anterior petrosectomy (AP) was performed in the remaining three sides. The anatomical dissection was documented in stepwise three-dimensional photographic images. Following dissection, representative case applications were reviewed. Results The MF approach provides direct access to the MF structures and IAC. The AP provides excellent access to the superomedial aspect of the posterior fossa. Key common steps include: positioning and skin incision; scalp and muscle flaps; burr holes; craniotomy flap elevation; dural dissection along the petrous ridge; division of the middle meningeal artery; and exposure of the greater superficial petrosal nerve, tegmen tympani, and V3. Then, to approach the IAC: superior IAC drilling, and longitudinal dura opening. The area drilled in the AP approach forms a pentagon limited by the petrous internal carotid artery, cochlea, IAC, petrous ridge, and lateral border of V3. Conclusion The MF approaches are challenging. Operatively oriented skull base dissections provide a crucial foundation for learning these techniques. We describe comprehensive step-by-step approaches intended to develop familiarity in the cadaver laboratory and facilitate understanding of their potential for skull base disorders. Basic surgical principles are described to help in the operating room as well as illustrative cases.

Abstract Background 3D printing—also known as additive manufacturing—has a wide range of applications. Reproduction of low-cost, high-fidelity, disease- or patient-specific models presents a key developmental area in simulation and education research for complex cranial surgery. Methods Using cadaveric dissections as source materials, skull base models were created, printed, and tested for educational value in teaching complex cranial approaches. In this pilot study, assessments were made on the value of 3D printed models demonstrating the retrosigmoid and posterior petrosectomy approaches. Models were assessed and tested in a small cohort of neurosurgery resident subjects (n = 3) using a series of 10 radiographic and 2 printed case examples, with efficacy determined via agreement survey and approach selection accuracy. Results All subjects indicated agreement or strong agreement for all study endpoints that 3D printed models provided significant improvements in understanding of neuroanatomic relationships and principles of approach selection, as compared to 2D dissections or patient cross-sectional imaging alone. Models were not superior to in-person hands-on teaching. Mean approach selection accuracy was 90% (±13%) for 10 imaging-based cases, or 92% (±7%) overall. Trainees strongly agreed that approach decision-making was enhanced by adjunctive use of 3D models for both radiographic and printed cases. Conclusion 3D printed models incorporating skull base approaches and/or pathologies provide a compelling addition to the complex cranial education armamentarium. Based on our preliminary analysis, 3D printed models offer substantial potential for pedagogical value as dissection guides, adjuncts to preoperative study and case preparation, or tools for approach selection training and evaluation.

Abstract BACKGROUND The lateral craniopharyngeal or Sternberg's canal (SC) originates from superior orbital fissure (SOF) and traverses the sphenoid body into the nasopharynx. A remnant of the canal, Sternberg's defect (SD), has been debated as a source of cerebrospinal fluid (CSF) leak. The canal was described in 1888, and there is limited accurate visual illustration in the literature. OBJECTIVE To provide a detailed anatomic and radiological illustration of the canal in pediatric and adult population including the mechanism undermining the incidence of the canal, and the possibility of the canal as a source of CSF leak. METHODS A total of 195 high-resolution computed tomographies (CT) of patients (50 3-yr-old, 20 5-yr-old, and 125 adults) and 43 dry adult skulls (86 sides) were analyzed for a canal matching the description of the SC. RESULTS A SC was identified in 86% of the 3-yr-old and 40% of 5-yr–old patients. The diameter and length were 2.12 mm and 12 mm, respectively. The incidence of the canal decreased with age as sinus pneumatization extended into the sphenoid sinus. Only 0.8% of the adult skull on CT had the canal. The canal was not present on the dry adult skulls examination, but SD was found in 4.65%. CONCLUSION SC exists with high incidence in the pediatric group. Sinus pneumatization obliterates the canal in the adult population, leaving a defect in 4.65% of cases, which given the location and related anatomic structures, is unlikely to be a source of CSF leak.