Citations

Introduction: Previous studies have successfully created blood clot analogues for In-vitro testing using animal blood. Blood components vary greatly among species and thus, creating clot analogues with human blood is likely a more accurate representation of thrombi formed in the human vasculature. We present a novel method of creating clot analogues from human blood and platelets that mimic the process by which clots form In-vivo . Methods: Following IRB approval from Mayo Clinic, human whole blood and platelets donations were obtained from the Blood Transfusion service. The whole blood was centrifuged at 1,200RPM for 20 minutes to separate it into its constituents. Plasma was removed and the remaining Red Blood Cells and Buffy Coat were mixed together by inverting. A total of 12 clot analogues were created with varying concentrations of components; Red Blood cells/Buffy Coat, Plasma and Platelets. Thrombin was added first to stimulate platelets activation for a total of 5 mins whilst continuously mixing by inversion. The RBC/WBC mixture was added next followed by CaCl2. The mixture was then quickly drawn into a 3cc syringe and spun overnight at 20RPM at room temperature to mimic dynamic flow conditions. Macro-photographs were taken to display the variation in texture and color between different clot analogue types. The clots were then fixed in 10% neutral buffered formalin for 24 hours prior to being processed. Histopathological analysis was performed using Hematoxylin and Eosin (H&E) and Martius Scarlet Blue (MSB) staining to confirm clot composition. Results: Red Blood cell-rich, Fibrin-rich, Platelet-rich and mixed clot analogues that accurately mimic clots retrieved from Acute Ischemic Stroke Patients were created. The range of histopathological compositions of the clot analogues is similar to that of the clinical samples. Conclusions: The addition and activation of platelets is key to creating accurate clot analogues for In-vitro testing. Spinning the clots is important to prevent natural sedimentation and mimic the In-vivo situation.

Ischemic stroke results from thrombus becoming lodged in a vessel in the cerebrovascular circulation. The constituents of the thrombus can vary widely and have direct effects on the mechanical properties of the thrombus. Thrombectomy procedures could potentially be improved if the mechanical properties of the thrombus could be determined prior to treatment. In the study, we developed a new non-contact method associated with Rayleigh wave propagations for evaluating mechanical properties of human clotted blood, referred to as ultrasound-mediated optical coherence elastography (UOCE). Due to clot mechanical properties being associated with fibrin and platelet content, eight different clot analogues with varying fibrin/platelets concentrations, from 0.6% (control group) to 19.0%, were produced, and the clot analog in each concentration was repeatedly measured five times. A highly focused transducer with a center frequency of 7.5 MHz was used to generate acoustic radiation forces exerted on the surface of clotted blood to induce Rayleigh wave propagations. The transducer was driven by a 50 dB radio frequency amplifier a 4 ms pulse which was repeated at a rate of 19 Hz. The optical coherence tomography (OCT) acquisition was set to 50 lateral positions and 4000 A-scans for each lateral position at a 76 kHz scan rate for total acquisition time of 52.6 ms. The results demonstrated that the Rayleigh wave group velocities positively correlated with the concentrations of fibrin/platelets. The group velocities ranged from 0.78 ± 0.02 m/s for 0.6% fibrin/platelets and increased to 2.42 ± 0.06 m/s at a fibrin/platelets concentration of 19.0%. There are statistically significant difference ( p <0.05) between control group and all clot analogues with a fibrin/platelets concentration of greater than 2.3%. In conclusion, we propose UOCE as a novel approach capable of evaluating mechanical properties of human blood clots based on Rayleigh wave propagation. This sensitive method can be used for the evaluation of the mechanical properties of human blood clot analogues and thrombectomy samples.

Introduction: Characterization of acute ischemic stroke thrombi has typically focused on the two dimensional (2D) histological characterization of the thrombus. Little is known about the three dimensional (3D) structure of these occlusive thrombi. Electron Microscopy (EM) can be used to obtain 3D information about the organization of clot components. Individual structures can be segmented and qualitative and quantitative information obtained from the clots. Methods: Following IRB approval from Mayo Clinic, acute ischemic stroke clot samples were collected from 10 patients treated at Mayo Clinic. Samples were immediately fixed in fresh modified Trumps fixative solution. A representative fragment of clot was taken and split longitudinally into two pieces; one piece was sent for 3D-EM analysis and the other for histological processing and analysis. Hematoxylin and eosin stain (H&E) and Martius Scarlett Blue (MSB) histological stains were used for conventional histopathology evaluation and components analysis. Immunohistochemical (IHC) staining using anti-CD42b (Platelets) was applied to confirm the presence of platelets in each clot. Serial block-face scanning electron microscopy was used to generate high-resolution three-dimensional images. Results: The 2D morphological features of the clot were identified using H&E, MSB and anti-CD42b staining. The 3D organization of thrombi varies greatly, both within and between clots depending on the constituents. Red Blood Cell-rich areas are mainly composed of Red Blood Cells packaged tightly together, with a small number of Fibrin strands interwoven between the cells. Fibrin-rich areas are characterized by dense networks of fibrin strands along with platelets and White Blood Cells with some sparse Red Blood Cells present. Platelet-rich areas are composed of large volumes of de-granulated platelets, some fibrin stands and white blood cells and an absence of Red Blood Cells. Conclusions: 3D electron microscopy can provide important information on the organization of components within thrombi. This could provide key information on the age and etiology of the thrombus. In addition, it may help to inform thrombolytic treatment and medical device design.

Background Several animal studies have demonstrated that mechanical thrombectomy (MT) for acute ischemic stroke (AIS) may cause vessel wall injury (VWI). However, the histological changes in human cerebral arteries following MT are difficult to determine. Objective To investigate the occurrence of VWI during MT by histological and immunohistochemical evaluation of AIS clots. Methods As part of the multicenter STRIP registry, 277 clots from 237 patients were analyzed using Martius Scarlett Blue stain and immunohistochemistry for CD34 (endothelial cells) and smooth muscle actin (smooth muscle cells). Results MT devices used were aspiration catheters (100 cases), stentriever (101 cases), and both (36 cases). VWI was found in 33/277 clots (12%). There was no significant correlation between VWI and MT device. The degree of damage varied from grade I (mild intimal damage, 24 clots), to grade II (relevant intimal and subintimal damage, 3 clots), and III (severe injury, 6 clots). VWI clots contained significantly more erythrocytes (p=0.006*) and less platelets/other (p=0.005*) than non-VWI clots suggesting soft thrombus material. Thrombolysis correlated with a lower rate of VWI (p=0.04*). VWI cases showed a significantly higher number of passes (2 [1–4] vs 1 [1–3], p=0.028*) and poorer recanalization outcome (p=0.01*) than cases without VWI. Conclusions Histological markers of VWI were present in 12% of AIS thrombi, suggesting that VWI might be related to MT. VWI was associated with soft thrombus consistency, higher number of passes and poorer revascularization outcome. There was no significant correlation between VWI and MT device.

Background and aim Mechanical thrombectomy (MT) for large vessel occlusion often requires multiple passes to retrieve the entire thrombus load. In this multi-institutional study we sought to examine the composition of thrombus fragments retrieved with each pass during MT. Methods Patients who required multiple passes during thrombectomy were included. Histopathological evaluation of thrombus fragments retrieved from each pass was performed using Martius Scarlet Blue staining and the composition of each thrombus component including RBC, fibrin and platelet was determined using image analysis software. Results 154 patients underwent MT and 868 passes was performed which resulted in 263 thrombus fragments retrieval. The analysis of thrombus components per pass showed higher RBC, lower fibrin and platelet composition in the pass 1 and 2 when compared to pass 3 and passes 4 or more combined (P values <0.05). There were no significant differences between thrombus fragments retrieved in pass 1 and pass 2 in terms of RBC, WBC, fibrin, and platelet composition (P values >0.05). Similarly, when each composition of thrombus fragments retrieved in pass 3 and passes 4 or more combined were compared with each other, no significant difference was noted (P values >0.05). Conclusion Our findings confirm that thrombus fragments retrieved with each pass differed significantly in histological content. Fragments in the first passes were associated with lower fibrin and platelet composition compared to fragments retrieved in passes three and four or higher. Also, thrombus fragments retrieved after failed pass were associated with higher fibrin and platelet components.

Background To develop a preclinical thromboembolic occlusion model for studying revascularization strategies. Methods Clot analog with barium sulfate was injected into the distal aorta in 9 New Zealand white rabbits. The situation of aorta occlusion was compared among fibrin-rich (n=4), red blood cell (RBC)-rich (n=3), and whole blood clot analogs (n=2) using digital subtraction angiography. Arterial geometries, histologic features and circumferential stretch of the distal aorta in rabbits were compared with the common carotid artery in swine and the distal internal carotid artery (ICA) in humans. Aspiration thrombectomy and mechanical thrombectomy using a stent retriever were performed in two rabbits. Results The aortic bifurcation was occluded after a single delivery of clot in 4 cases. It was occluded after the second clot injection in the 5 remaining rabbits. Fragmentation of RBC-rich clots occurred during clot injection in 2 cases. The mean diameters of the distal aorta and right common iliac artery in rabbits were 3.7±0.4 and 2.8±0.3 mm, respectively; the mean diameters of human ICA, and first and second segments of the middle cerebral artery (M1, M2) were 3.6±0.4, 3.1±0.4, and 2.4±0.4 mm, respectively. Arterial revascularization was achieved in both rabbits. Geometric, mechanical and histological factors of the distal aorta in rabbit were more close to human distal ICA than swine carotid artery. Conclusion Arterial occlusion can be achieved at the aortic bifurcation in rabbits, which is comparable to human ICA bifurcation. This thrombectomy model has the potential to be used for testing of thrombectomy devices.

Background Characterization of acute ischemic stroke (AIS) clots has typically focused on two-dimensional histological analysis of the thrombus. The three-dimensional (3D) architecture and distribution of components within emboli have not been fully investigated. The aim of this study was to examine the composition and microstructure of AIS clots using histology and serial block-face scanning electron microscopy (SBFSEM). Methods As part of the multi-institutional STRIP registry, 10 consecutive AIS emboli were collected from 10 patients treated by mechanical thrombectomy. Histological and immunohistochemical analysis was performed to determine clot composition. SBFSEM was used to assess the ultrastructural organization of the clots and specific features of individual components. Results Quantification of Martius Scarlett Blue stain identified fibrin (44.4%) and red blood cells (RBCs, 32.6%) as the main components. Immunohistochemistry showed a mean platelet and von Willebrand factor content of 23.9% and 11.8%, respectively. The 3D organization of emboli varied greatly depending on the region analyzed. RBC-rich areas were composed mainly of tightly packed RBCs deformed into polyhedrocytes with scant fibrin fibers interwoven between cells. The regions with mixed composition showed thick fibrin fibers along with platelets, white blood cells and RBC clusters. Fibrin-rich areas contained dense fibrin masses with sparse RBC. In three cases, the fibrin formed a grid-like or a sponge-like pattern, likely due to thrombolytic treatment. Segmentation showed that fibrin fibers were thinner and less densely packed in these cases. Conclusions 3D-SEM provides novel and potentially clinically relevant information on clot components and ultrastructure which may help to inform thrombolytic treatment and medical device design.

Background Initial studies investigating correlations between stroke etiology and clot composition are conflicting and do not account for clot size as determined by area. Radiological studies have shown that cardioembolic strokes are associated with shorter clot lengths and lower clot burden than non-cardioembolic clots. Objective To report the relationship between stroke etiology, extracted clot area, and histological composition at each procedural pass. Methods As part of the multi-institutional RESTORE Registry, the Martius Scarlett Blue stained histological composition and extracted clot area of 612 per-pass clots retrieved from 441 patients during mechanical thrombectomy procedures were quantified. Correlations with clinical and procedural details were investigated. Results Clot composition varied significantly with procedural passes; clots retrieved in earlier passes had higher red blood cell content (H4=11.644, p=0.020) and larger extracted clot area (H4=10.730, p=0.030). Later passes were associated with significantly higher fibrin (H4=12.935, p=0.012) and platelets/other (H4=15.977, p=0.003) content and smaller extracted clot area. Large artery atherosclerotic (LAA) clots were significantly larger in the extracted clot area and more red blood cell-rich than other etiologies in passes 1–3. Cardioembolic and cryptogenic clots had similar histological composition and extracted clot area across all procedural passes. Conclusion LAA clots are larger and associated with a large red blood cell-rich extracted clot area, suggesting soft thrombus material. Cardioembolic clots are smaller in the extracted clot area, consistent in composition and area across passes, and have higher fibrin and platelets/other content than LAA clots, making them stiffer clots. The per-pass histological composition and extracted clot area of cryptogenic clots are similar to those of cardioembolic clots, suggesting similar formation mechanisms.

Abstract Background: Most clots retrieved from patients with acute ischemic stroke are ‘red’ in color and are predominantly composed of red blood cells and fibrin. ‘White’ clots represent a less common entity and their histological composition is largely unknown.The aim of this study was to investigate the composition, imaging and procedural characteristics of ‘white’ clots retrieved by mechanical thrombectomy.Materials and Methods:Nineteen ‘white’ thrombi selected by visual inspection from 293 cases were collected as part of the multi-institutional RESTORE registry. Non-contrast computed tomography (NCCT), histological and immunohistochemical analyses were performed. Components were quantified using Orbit Image Analysis.Results:Quantification of Martius Scarlett Blue stain identified platelets/other as the major component in ‘white’ clots’ (63%) followed by fibrin (26%), red blood cells (7%) and white blood cells (4%). ‘White’ clots presented significantly more platelets/other and less red blood cells compared to the ‘red’ clots which showed a mean of 23% and 44%, respectively. The mean platelet (CD42b) content in ‘white’ clots was 43%; von Willebrand Factor (vWF) mean expression was 38%.Collagen and calcification were associated in one case. Fatty acid binding protein 4 was expressed in two cases.‘White’ clots were also significantly smaller (9.5 versus 12 mm) and less hyperdense (52 versus 61 Hounsfield Units) on NCCT compared to the other cases.Conclusions:‘White’ clots represented 6% of our cohort and are platelet and vWF-rich. Calcification, collagen and adipocytes were found occasionally. ‘White’ clots differ from other clots in composition, size and density on NCCT.