Citations

Abstract3D stem cell spheroids have immense potential for various tissue engineering applications. However, current spheroid fabrication techniques encounter cell viability issues due to limited oxygen access for cells trapped within the core, as well as nonspecific differentiation issues due to the complicated environment following transplantation. In this study, functional 3D spheroids are developed using mesenchymal stem cells with 2D hetero‐nanostructures (HNSs) composed of single‐stranded DNA (ssDNA) binding carbon nanotubes (sdCNTs) and gelatin‐bind black phosphorus nanosheets (gBPNSs). An osteogenic molecule, dexamethasone (DEX), is further loaded to fabricate an sdCNTgBP‐DEX HNS. This approach aims to establish a multifunctional cell‐inductive 3D spheroid with improved oxygen transportation through hollow nanotubes, stimulated stem cell growth by phosphate ions supplied from BP oxidation, in situ immunoregulation, and osteogenesis induction by DEX molecules after implantation. Initial transplantation of the 3D spheroids in rat calvarial bone defect shows in vivo macrophage shifts to an M2 phenotype, leading to a pro‐healing microenvironment for regeneration. Prolonged implantation demonstrates outstanding in vivo neovascularization, osteointegration, and new bone regeneration. Therefore, these engineered 3D spheroids hold great promise for bone repair as they allow for stem cell delivery and provide immunoregulative and osteogenic signals within an all‐in‐one construct.

Background: Deeper depth of response (DpR) after induction therapy, especially gain of negative minimal residual disease (MRD), has been linked to prolonged survival in multiple myeloma (MM). However, flow-MRD examination focuses on the numbers but not on the biological characteristics of residual plasma cells (PCs). Objectives: To explore whether the genetic features of residual tumor cells affect the survival time of patients with MM. Design: A retrospective cohort study. Methods: We investigated the clonality of cytogenetic abnormalities (CAs) of the residual PCs using interphase fluorescence in situ hybridization (iFISH) in the National Longitudinal Cohort of Hematological Diseases in China (NCT04645199). Here, a longitudinal cohort of 269 patients with patient-paired diagnostic and post-induction iFISH results was analyzed. Results: Persistent CAs after induction therapy were detected in about half of the patients (118/269, 43%), and patients with undetectable CAs showed significantly improved survival compared with those with genetically detectable MRD [median progression-free survival (mPFS): 59.7 versus 35.7 months, p < 0.001; median overall survival (mOS): 97.1 versus 68.8 months, p = 0.011]. In addition, different patterns of therapy-induced clonal evolution were observed by comparing the clonal structure of residual PCs with paired baseline samples. Patients who maintained at a high risk during follow-up had the worst survival (mPFS: 30.5 months; mOS: 54.4 months), while those who returned to lower risk or had iFISH− at both time points had the best survival (mPFS: 62.0 months, mOS: not reached). Conclusion: These findings highlighted the prognostic value of genetic testing in residual tumor cells, which may provide a deep understanding of clonal evolution and guide clinical therapeutic strategies.

Abstract Polycaprolactone fumarate (PCLF) is a cross‐linkable PCL derivative extensively considered for tissue engineering applications. Although injection molding has been widely used to develop PCLF scaffolds, platforms developed using such technique lack precise control on architecture, design, and porosity required to ensure adequate cellular and tissue responses. In particular, the scaffolds should provide a suitable surface for cell attachment and proliferation, and facilitate cell–cell communication and nutrient flow. 3D printing technologies have led to new architype for biomaterial development with micro‐architecture mimicking native tissue. Here, we developed a method for 3D printing of PCLF structures using the extrusion printing technique. The crosslinking property of PCLF enabled the unique post‐processing of 3D printed scaffolds resulting in highly porous and flexible PCLF scaffolds with compressive properties imitating natural features of cancellous bone. Generated scaffolds supported excellent attachment and proliferation of mesenchymal stem cells (MSC). The high porosity of PCLF scaffolds facilitated vascularized membrane formation demonstrable with the stringency of the ex ovo chicken chorioallantoic membrane (CAM) implantation. Furthermore, upon implantation to rat calvarium defects, PCLF scaffolds enabled an exceptional new bone formation with a bone mineral density of newly formed bone mirroring native bone tissue. These studies suggest that the 3D‐printed highly porous PCLF scaffolds may serve as a suitable biomaterial platform to significantly expand the utility of the PCLF biomaterial for bone tissue engineering applications.

AbstractPleiotropy, which consists of a single gene or allelic variant affecting multiple unrelated traits, is common across cancers, with evidence for genome‐wide significant loci shared across cancer and noncancer traits. This feature is particularly relevant in multiple myeloma (MM) because several susceptibility loci that have been identified to date are pleiotropic. Therefore, the aim of this study was to identify novel pleiotropic variants involved in MM risk using 28 684 independent single nucleotide polymorphisms (SNPs) from GWAS Catalog that reached a significant association (P < 5 × 10−8) with their respective trait. The selected SNPs were analyzed in 2434 MM cases and 3446 controls from the International Lymphoma Epidemiology Consortium (InterLymph). The 10 SNPs showing the strongest associations with MM risk in InterLymph were selected for replication in an independent set of 1955 MM cases and 1549 controls from the International Multiple Myeloma rESEarch (IMMEnSE) consortium and 418 MM cases and 147 282 controls from the FinnGen project. The combined analysis of the three studies identified an association between DNAJB4‐rs34517439‐A and an increased risk of developing MM (OR = 1.22, 95%CI 1.13‐1.32, P = 4.81 × 10−7). rs34517439‐A is associated with a modified expression of the FUBP1 gene, which encodes a multifunctional DNA and RNA‐binding protein that it was observed to influence the regulation of various genes involved in cell cycle regulation, among which various oncogenes and oncosuppressors. In conclusion, with a pleiotropic scan approach we identified DNAJB4‐rs34517439 as a potentially novel MM risk locus.

AbstractA promising new strategy emerged in bone tissue engineering is to incorporate black phosphorus (BP) into polymer scaffolds, fabricating nanocomposite hydrogel platforms with biocompatibility, degradation controllability, and osteogenic capacity. BP quantum dot is a new concept and stands out recently among the BP family due to its tiny structure and a series of excellent characteristics. In this study, BP was processed into nanosheets of three different sizes via different exfoliation strategies and then incorporated into cross‐linkable oligo[poly(ethylene glycol) fumarate] (OPF) to produce nanocomposite hydrogels for bone regeneration. The three different BP nanosheets were designated as BP‐L, BP‐M, and BP‐S, with a corresponding diameter of 242.3 ± 90.0, 107.1 ± 47.9, and 18.8 ± 4.6 nm. The degradation kinetics and osteogenic capacity of MC3T3 pre‐osteoblasts in vitro were both dependent on the BP size. BP exhibited a controllable degradation rate, which increased with the decrease of the size of the nanosheets, coupled with the release of phosphate in vitro. The osteogenic capacity of the hydrogels was promoted with the addition of all BP nanosheets, compared with OPF hydrogel alone. The smallest BP quantum dots was shown to be optimal in enhancing MC3T3 cell behaviors, including spreading, distribution, proliferation, and differentiation on the OPF hydrogels. These results reinforced that the supplementation of BP quantum dots into OPF nanocomposite hydrogel scaffolds could potentially find application in the restoration of bone defects.

In situ cell recruitment is a promising regenerative medicine strategy with the purpose of tissue regeneration without stem cell transplantation. This chemotaxis-based strategy is aimed at ensuring a restorative environment through the release of chemokines that promote site-specific migration of healing cell populations. Stromal cell-derived factor-1α (SDF-1α) is a critical chemokine that can regulate the migration of mesenchymal stem cells (MSCs). Accordingly, here, SDF-1α-loaded microporous oligo[poly(ethylene glycol) fumarate]/bis[2-(methacryloyloxy)ethyl] phosphate composites (SDF-1α/OPF/BP) were engineered and probed. SDF-1α/OPF/BP composites were loaded with escalating SDF-1α concentrations, namely, 0 ng/ml, 50 ng/ml, 100 ng/ml, and 200 ng/ml, and were cocultured with MSC. Scratching assay, Transwell assay, and three-dimensional migration model were utilized to assess the migration response of MSCs. Immunofluorescence staining of Runx2 and osteopontin (OPN), ELISA assay of osteocalcin (OCN) and alkaline phosphatase (ALP), and Alizarin Red S staining were conducted to assess the osteogenesis of MSCs. All SDF-1α/OPF/BP composites engendered a release of SDF-1α (>80%) during the first four days. SDF-1α released from the composites significantly promoted migration and osteogenic differentiation of MSCs documented by upregulated expression of osteogenic-related proteins, ALP, Runx2, OCN, and OPN. SDF-1α at 100 ng/ml was optimal for enhanced migration and osteogenic proficiency. Thus, designed SDF-1α/OPF/BP composites were competent in promoting the homing and osteogenesis of MSCs and thus offer a promising bioactive scaffold candidate for on-demand bone tissue regeneration.