Liu, Yang

Objectives: The development and evaluation of percutaneous thrombectomy devices for pulmonary embolism (PE) pose a need for standardized large in vivo models with representative anatomical and physiological conditions and clots analogs. In this study, we present a swine model of PE model employing human-derived clot analogs. Material and Methods: Baseline angiographic and physiological pressure measurements were obtained in six adult Yorkshire pigs (45–65 kg) and results were benchmarked for interspecies comparison with published human data using fluoroscopic examinations, intra-arterial pressure measurements, and histologic studies. Then, clot analogs were created ex vivo employing banked human blood and a subset incubated in iodinated contrast for fluoroscopic visualization. Clot analogs were then embolized via a femoral venous access and angiographic/physiological consequences were evaluated. Results: The main, right, and left pulmonary artery diameters were 24 ± 1.1 mm, 16.5 ± 0.8 mm, and 12.6 ± 1.2 mm, respectively. The angle between the main pulmonary artery at the bifurcation point was approximately 90–95°. The clot analogs were heterogeneous and had increased fibrin content along the clot length. The overall composition was 96.63% red blood cell (RBC)/3.37% fibrin in the initial section, 48.85% RBC/51.15% fibrin in the intermediate section, and 3.44% RBC/96.56% fibrin in the final section. Embolization of the clot analogs resulted in distal occlusion of the right and left pulmonary arteries. Conclusions: This swine model coupled with clot analog is able to accurately mimic human anatomical and physiological conditions in PE making it feasible for the evaluation of pulmonary thrombectomy devices.