Pinheiro-Neto, Carlos D

ABSTRACT Background Preoperative vascular embolization (PVE) is commonly used in managing juvenile nasopharyngeal angiofibroma (JNA) to improve outcomes. However, few studies have evaluated how embolization patterns and vascular features affect prognosis. Methods A 15‐year retrospective review was performed on 44 patients with JNA undergoing surgery at one institution. Data included demographics, vascular supply, embolization techniques, surgical outcomes, and recurrence. Results Forty‐three patients underwent PVE. Most tumors were embolized transarterially (93.0%) using polyvinyl alcohol‐based agents (79.1%). The internal maxillary artery was most commonly embolized (93.0%). Internal carotid artery supply was present in 34.9%, and more than two vessels were embolized in 23.3%. Postembolization tumor blush occurred in 60.5%, with a median of 5% of the pre‐embolization blush remaining after embolization. Neither internal carotid involvement, number of vessels embolized, nor residual blush significantly impacted operative time, surgical outcomes, or recurrence. Conclusion With effective embolization, vascular complexity might not affect JNA resection outcomes. Multicenter studies are required to confirm those findings.

ObjectiveThe use of composite chondromucosal nasal septal flaps (ccNSF) has been demonstrated to be effective in cadaveric studies for the anterior skull base and the orbit. However, their application in the clinical setting remains unexplored. Our study aims to introduce a new method for treating palatal defects using ccNSF. Additionally, we studied the average NSF area and compared it to the average palate area.MethodsWe collected 108 CT scans from the medical records of patients without head and neck pathologies from a tertiary medical institution. We quantified the quadrangular (septal) cartilage and palate areas. Furthermore, we included a clinical case in which we used the ccNSF for the palatal defect reconstruction. This was to compare the mean area between the palate and the septal cartilage.ResultsThe ccNSF covered the palatal defect without any significant complications for the first 9 months of follow‐up. A total of 102 CT scans met the inclusion criteria and were measured. We found that the mean quadrangular cartilage had a length of 2.50 (±0.52) cm, a width of 2.28 (±0.51) cm, and an area of 5.43 (±1.68) cm2. The mean palate length was 2.73 (±0.44) cm, with a width of 3.13 (±0.34) cm, and area of 7.87 (±1.43) cm2.ConclusionsThe ccNSF proved successful in palatal defect reconstruction, resulting in positive outcomes and no major complications until the 9‐month follow‐up. The ccNSF is a useful flap that avoids the use of free flap transfer and its associated morbidities.Level of Evidence4 Laryngoscope, 134:4882–4887, 2024

Abstract Introduction The transbasal approach traditionally uses a bicoronal scalp incision with bifrontal craniotomy to establish an extradural midline skull base working corridor. Depending on additional craniofacial osteotomies, this approach can expand its reach to the nasal cavity and paranasal sinuses and may be employed for the resection of particularly complex sinonasal and midline skull base tumors. Given its discrepancy in nomenclature and differences in interoperator technique, we propose a practical, operatively oriented guide for trainees performing this approach. Methods Three formalin-fixed, latex-injected specimens were dissected under microscopic magnification and endoscopic-assisted visualization. Stepwise dissections of the transcranial-transbasal approach with common modifications were performed, documented with three-dimensional photography, and supplemented with representative case applications. Results The traditional transbasal approach via bifrontal craniotomy affords wide extradural access to the anterior cranial fossa and central skull base. The addition of craniofacial osteotomies further expands access into the sinonasal cavities, clivus, and craniocervical junction. Key steps described include patient positioning, bicoronal skin incision, pericranial graft harvest, bifrontal craniotomy, orbital rim osteotomy, sphenoidotomy, bilateral ethmoidectomies, and microsurgical dissection of the sellar region. Basal superior sagittal sinus ligation and durotomy allow for intradural exposure. Reconstruction techniques are also discussed. Conclusion While the transbasal approach is rich with historical descriptions, illustrations, and modifications, its stepwise performance may be relatively unknown and unclear to younger generations of trainees. We present a comprehensive guide to optimize familiarity with the transbasal approach and its indications in the surgical anatomy laboratory, mastery of the relevant microsurgical anatomy, and simultaneous preparation for learning and participation in the operating room.

AbstractThe 3D stereoscopic technique consists in providing the illusional perception of depth of a given object using two different images mimicking how the right and left eyes capture the object. Both images are slightly different and when overlapped gives a three‐dimensional (3D) experience. Considering the limitations for establishing surgical laboratories and dissections courses in some educational institutions, techniques such as stereoscopy and photogrammetry seem to play an important role in neuroanatomy and neurosurgical education. The aim of this study was to describe how to combine and set up realistic models acquired with photogrammetry scans in 3D stereoscopic projections. Three donors, one dry skull, embalmed brain and head, were scanned using photogrammetry. The software used for displaying the final realistic 3D models (Blender, Amsterdam, the Netherlands) is a free software and allows stereoscopic projection without compromising the interactivity of each model. By default, the model was exported and immediately displayed as a red cyan 3D mode. The 3D projector used in the manuscript required a side‐by‐side 3D mode which was set up with simple commands on the software. The final stereoscopy projection offered depth perception and a visualization in 360° of each donor; this perception was noted especially when visualizing donors with different cavities and fossae. The combination of 3D techniques is of paramount importance for neuroanatomy education. Stereoscopic projections could provide a valuable tool for neuroanatomy instruction directed at clinical trainees and could be especially useful when access to laboratory‐based learning is limited.

AbstractBackgroundFor aggressive maxillary sinus and pterygopalatine fossa (PPF) tumors, an en‐bloc pterygomaxillectomy may be indicated.MethodsFive head specimens were used to study the feasibility of an en‐bloc pterygomaxillectomy. Eighty‐five non‐pathological CT scans were used to compare the superior edge of the inferior turbinate (IT) and the middle turbinate tail (MT) as landmarks for the pterygoid osteotomy.ResultsThrough a combined sublabial–subperiosteal incision and transoral route, a mid‐sagittal osteotomy through the hard palate and an axial osteotomy below the infraorbital foramen were performed. For the endoscopic pterygoid osteotomy, an infra‐vidian transpterygoid approach was performed, subsequently removing the pterygomaxillectomy en‐bloc. As landmarks, the osteotomies at the level of the MT tail and IT resected the pterygoid plates completely, but the IT osteotomy was further away from the vidian canal (7.5 vs. 6 mm).ConclusionsThe endoscopic‐assisted en‐bloc pterygomaxillectomy is feasible. The IT landmark is safe and ensures complete resection of the pterygoid plates.

Abstract Hands‐on dissections using cadaveric tissues for neuroanatomical education are not easily available in many educational institutions due to financial, safety, and ethical factors. Supplementary pedagogical tools, for instance, 3D models of anatomical specimens acquired with photogrammetry are an efficient alternative to democratize the 3D anatomical data. The aim of this study was to describe a technical guideline for acquiring realistic 3D anatomic models with photogrammetry and to improve the teaching and learning process in neuroanatomy. Seven specimens with different sizes, cadaveric tissues, and textures were used to demonstrate the step‐by‐step instructions for specimen preparation, photogrammetry setup, post‐processing, and display of the 3D model. The photogrammetry scanning consists of three cameras arranged vertically facing the specimen to be scanned. In order to optimize the scanning process and the acquisition of optimal images, high‐quality 3D models require complex and challenging adjustments in the positioning of the specimens within the scanner, as well as adjustments of the turntable, custom specimen holders, cameras, lighting, computer hardware, and its software. MeshLab® software was used for editing the 3D model before exporting it to MedReality® (Thyng, Chicago, IL) and SketchFab® (Epic, Cary, NC) platforms. Both allow manipulation of the models using various angles and magnifications and are easily accessed using mobile, immersive, and personal computer devices free of charge for viewers. Photogrammetry scans offer a 360° view of the 3D models ubiquitously accessible on any device independent of operating system and should be considered as a tool to optimize and democratize the teaching of neuroanatomy.

Objectives The previously described S‐point, corresponds to the medial projection of the middle turbinate axilla in the superior nasal septum and has been identified as a common source of severe epistaxis. The objective is to define the anatomical patterns of vascularization of the S‐point area that could explain its clinical relevance. Methods Thirty‐three nasal septums of latex‐injected formalin‐embalmed and fresh human cadaveric heads were dissected to analyze the arterial arrangement of the S‐point area. Measurements and patterns of vascularization were described. Results The S‐point area, was consistently surrounded by a single or multiple arterial anastomotic arches consistently formed superiorly by the anterior ethmoidal and posterior ethmoidal artery branches, and inferiorly by the posterior septal artery. The caliber of the arterial arches was typically larger than the caliber of the arterial branches supplying them. A single arch was present in 36.3% of septums, and multiple arches in 63.6%. The mean distance from the S‐point to the anterior limit of the arch was 9 mm, to the posterior arch when the present was 3 mm, to the superior limit 6 mm, to the inferior limit 6 mm, and to the nasal roof was 10 mm. Conclusion This study demonstrates the dense arterial configuration of the S point area, which is characterized by a single or multiple vascular arches of greater caliber than the branches of origin. This finding could explain why the S‐point area is a frequent source of epistaxis, and guide its surgical cauterization when an obvious vascular ectasia is not visualized. Level of Evidence N/A Laryngoscope , 133:2075–2080, 2023

ObjectiveWhile pedicled intranasal flaps, such as the nasoseptal flap (NSF), successfully reduce postoperative CSF leaks following endoscopic endonasal approaches (EEA) to the skull base, morbidity remains prevalent. This study describes the first cadaveric description and radiographic analysis of the posterior septal nasal floor mucosal flap (PSNF) designed to reduce pedicled nasal flap morbidity. A case series is also detailed.Study DesignCadaveric dissection, radiographic analysis, and case series.MethodsSeven cadaver specimens underwent harvest of the PSNF. PSNF flap dimensions were measured on the thirty deidentified sinus computed tomography (CT) scans. A retrospective case series was performed on the first set of patients who received the PSNF for reconstruction of a sellar base defect. Information concerning complications, symptoms, and the appearance of the flap was recorded from records of the patient's postoperative inpatient stay, 1‐week postop visit, and 1‐month postop visit.ResultsCadaver dissection of the PSNF flap demonstrated good arc rotation along its pedicle with ability to cover both sellar and planum defects. Cadaveric flap measurements and CT‐derived measurements estimated a mean surface area of 16.7 and 18.3 cm2, respectively. 15 patients underwent reconstruction of a sellar or planum defect using the PSNF technique. Only one CSF leak was encountered postoperatively. Minimal crusting of the flap and donor site was seen 1 month postoperatively.ConclusionThe PSNF flap provides a sizeable pedicled region for reconstruction comparable to other pedicled nasal flaps. Our case series demonstrated good postoperative outcomes without reduced donor site morbidity.Level of Evidence4 Laryngoscope, 132:1561–1568, 2022