Citations

AbstractThe purpose of this study is to identify regions of spinal column in which more than three contiguous vertebrae can be reliably and quickly aligned within 1 mm using a 6‐degree (6D) couch and full body immobilization device. We analyzed 45 cases treated over a 3‐month period. Each case was aligned using ExacTrac x‐ray positioning system with integrated 6D couch to be within 1° and 1 mm in all six dimensions. Cone‐Beam computed tomography (CBCT) with at least 17.5 cm field of view (FOV) in the superior–inferior direction was taken immediately after ExacTrac positioning. It was used to examine the residual error of five to nine contiguous vertebrae visible in the FOV. The residual error of each vertebra was determined by expanding/contracting the vertebrae contour with a margin in millimeter integrals on the planning CT such that the new contours would enclose the corresponding vertebrae contour on CBCT. Submillimeter initial setup accuracy was consistently achieved in 98% (40/41) cases for a span of five or more vertebrae starting from T2 vertebra and extending caudally to S5. The curvature of spinal column along the cervical region and cervicothoracic junction was not easily reproducible between treatment and simulation. Fifty‐seven percent (8/14) of cases in this region had residual setup error of more than 1 mm in nearby vertebrae after alignment using 6D couch with image guidance. In conclusion, 6D couch integrated with image guidance is convenient and accurately corrects small rotational shifts. Consequently, more than three contiguous vertebrae can be aligned within 1 mm with immobilization that reliably reproduces the curvature of the thoracic and lumbar spinal column. Ability of accurate setup is becoming less a concern in limiting the use of stereotactic radiosurgery or stereotactic body radiation therapy to treat multilevel spinal target.

ABSTRACTSurgical repair is a common treatment for rotator cuff tear; however, the retear rate is high. A high degree of suture repair strength is important to ensure rotator cuff integrity for healing. The purpose of this study was to compare the mechanical performance of rotator cuffs repaired with a mesh suture versus traditional polydioxanone suture II and FiberWire sutures in a canine in vitro model. Seventy‐two canine shoulders were harvested. An infraspinatus tendon tear was created in each shoulder. Two suture techniques—simple interrupted sutures and two‐row suture bridge—were used to reconnect the infraspinatus tendon to the greater tuberosity, using three different suture types: Mesh suture, polydioxanone suture II, or FiberWire. Shoulders were loaded to failure under displacement control at a rate of 20 mm/min. Failure load was compared between suture types and techniques. Ultimate failure load was significantly higher in the specimens repaired with mesh suture than with polydioxanone suture II or FiberWire, regardless of suture technique. There was no significant difference in stiffness among the six groups, with the exception that FiberWire repairs were stiffer than polydioxanone suture II repairs with the simple interrupted technique. All specimens failed by suture pull‐out from the tendon. Based on our biomechanical findings, rotator cuff repair with the mesh suture might provide superior initial strength against failure compared with the traditional polydioxanone suture II or FiberWire sutures. Use of the mesh suture may provide increased initial fixation strength and decrease gap formation, which could result in improved healing and lower re‐tear rates following rotator cuff repair. © 2017 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 36:987–992, 2018.

ABSTRACT Carpal tunnel pressure is a key factor in the etiology of carpal tunnel syndrome. Numerous approaches have been conducted to measure carpal tunnel pressure. However, most techniques are invasive and take time and effort. We have developed an innovative approach to noninvasively assess the tunnel pressure by using the ultrasound surface wave elastography (USWE) technique. In a previous study it was shown that the shear wave speed in a tendon increased linearly with increasing tunnel pressure enclosed the tendon in a simple tendon model. This study aimed to examine the relationship between the carpal tunnel pressure and the shear wave speeds inside and outside the carpal tunnel in a human cadaveric model. The result showed that the shear wave speed inside the carpal tunnel increased linearly with created carpal tunnel pressure, while the shear wave speed outside the carpal tunnel remained constant. These findings suggest that noninvasive measurement of carpal tunnel pressure is possible by measuring the shear wave speed in the tendon. After fully establishing this technology and being applicable in clinic, it would be useful in the diagnosis of carpal tunnel syndrome. For that reason, further validation with this technique in both healthy controls and patients with carpal tunnel syndrome is required. © 2017 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 36:477–483, 2018.

Abstract Purpose: Receptor tyrosine kinases (RTKs) are frequently deregulated in leukemia, yet the biological consequences of this deregulation remain elusive. The mechanisms underlying aberrant methylation, a hallmark of leukemia, are not fully understood. Here we investigated the role of RTKs in methylation abnormalities and characterized the hypomethylating activities of RTK inhibitors. Experimental Design: Whether and how RTKs regulate expression of DNA methyltransferases (DNMTs), tumor suppressor genes (TSGs) as well as global and gene-specific DNA methylation were examined. The pharmacologic activities and mechanisms of actions of RTK inhibitors in vitro, ex vivo, in mice, and in nilotinib-treated leukemia patients were determined. Results: Upregulation of RTKs paralleled DNMT overexpression in leukemia cell lines and patient blasts. Knockdown of RTKs disrupted, whereas enforced expression increased DNMT expression and DNA methylation. Treatment with the RTK inhibitor, nilotinib, resulted in a reduction of Sp1-dependent DNMT1 expression, the diminution of global DNA methylation, and the upregulation of the p15INK4B gene through promoter hypomethylation in AML cell lines and patient blasts. This led to disruption of AML cell clonogenicity and promotion of cellular apoptosis without obvious changes in cell cycle. Importantly, nilotinib administration in mice and human patients with AML impaired expression of DNMTs followed by DNA hypomethylation, TSG re-expression, and leukemia regression. Conclusions: Our findings demonstrate RTKs as novel regulators of DNMT-dependent DNA methylation and define DNA methylation status in AML cells as a pharmacodynamic marker for their response to RTK-based therapy, providing new therapeutic avenues for RTK inhibitors in overcoming epigenetic abnormalities in leukemia. Clin Cancer Res; 23(20); 6254–66. ©2017 AACR.

Abstract Context: Recent studies showed that transcription of the MYC gene is driven by the interaction of bromodomain and extraterminal domain (BET) proteins with acetylated histones on chromatin. JQ1, a potent inhibitor that effectively disrupts the interaction of BET proteins with acetylated histones, preferentially suppresses transcription of the MYC gene. We recently reported that JQ1 decreased thyroid tumor growth and improved survival in a mouse model of anaplastic thyroid cancer (ATC) by targeting MYC transcription. The role of MYC in human ATC and whether JQ1 can effectively target MYC as a treatment modality have not been elucidated. Objective: To understand the underlying molecular mechanisms of JQ1, we evaluated its efficacy in human ATC cell lines and xenograft models. Design: We determined the effects of JQ1 on proliferation and invasion in cell lines and xenograft tumors. We identified key regulators critical for JQ1-affected proliferation and invasion of tumor cells. Results: JQ1 markedly inhibited proliferation of four ATC cell lines by suppression of MYC and elevation of p21and p27 to decrease phosphorylated Rb and delay cell cycle progression from the G0/G1 phase to the S phase. JQ1 blocked cell invasion by attenuating epithelial-mesenchymal transition signals. These cell-based studies were further confirmed in xenograft studies in which the size and rate of tumor growth were inhibited by JQ1 via inhibition of p21-cyclin/cyclin-dependent kinase-Rb-E2F signaling. Conclusions: These results suggest targeting of the MYC protein could be a potential treatment modality for human ATC for which effective treatment options are limited.

ABSTRACTIntroduction: The aim of this study was to assess alterations in median nerve (MN) biomechanics within the carpal tunnel resulting from ultrasound‐guided hydrodissection in a cadaveric model. Methods: Twelve fresh frozen human cadaver hands were used. MN gliding resistance was measured at baseline and posthydrodissection, by pulling the nerve proximally and then returning it to the origin. Six specimens were treated with hydrodissection, and 6 were used as controls. Results: In the hydrodissection group there was a significant reduction in mean peak gliding resistance of 92.9 ± 34.8 mN between baseline and immediately posthydrodissection (21.4% ± 10.5%; P = 0.001). No significant reduction between baseline and the second cycle occurred in the control group: 9.6 ± 29.8 mN (0.4% ± 5.3%; P = 0.467). Discussion: Hydrodissection can decrease the gliding resistance of the MN within the carpal tunnel, at least in wrists unaffected by carpal tunnel syndrome. A clinical trial of hydrodissection seems justified. Muscle Nerve 57: 25–32, 2018

Purpose The purpose of this cadaveric study was to compare standard and modified coracoid transfer procedures, bicortical and tricortical iliac crest autografts, and tibial plafond and glenoid allografts with respect to glenoid surface curvature restoration. Methods Computed tomography scans of 8 cadaveric shoulders were acquired in 9 conditions: (1) intact, (2) 25% width defect, (3) classic Latarjet, (4) modified congruent‐arc Latarjet, (5) tricortical iliac crest inner table, (6) outer table, (7) bicortical iliac crest, (8) distal tibia, and (9) glenoid allograft. Outcome measures included articular surface area, width, depth, axial and coronal radius of curvature, and subchondral articular step‐off, analyzed in bone and soft‐tissue window. Results Reconstruction of the articular surface area was optimal with the glenoid allograft (99.4%), classic Latarjet (97.4%), and iliac crest bicortical graft (93.2%). Depth was best restored by the congruent‐arc Latarjet (101.0%), tibial (98.9%), and glenoid (95.3%) allografts. Axial curvature was closely matched by the glenoid allograft (97.5%), classic Latarjet (108.7%), and iliac bicortical graft (91.2%). Coronal curvature was most accurately restored by the glenoid allograft (102.6%), the tibial allograft (115.0%), and the classic Latarjet (55.9%). The articular step‐off was smallest using the glenoid allograft. Conclusions Overall, glenoid allografts most accurately restored articular geometry. Alternative grafts provided restoration of some parameters but not others. Classic Latarjet performed well in axial and coronal curvature on average but exhibited large variability. Tibial allograft produced the poorest results in axial curvature, despite excellent coronal curvature reconstruction. The congruent‐arc Latarjet did not restore the axial curvature accurately and overcorrected coronal curvature. Graft geometry must be weighed against availability, morbidity, and the role of additional stabilizers. Clinical Relevance Accurate graft morphology may help prevent postoperative osteoarthritis. Grafts differ significantly regarding geometric parameters. The findings of this study will help surgeons select the most appropriate graft for glenoid reconstruction.

ObjectivesTo develop and validate a nomogram to estimate the pretest probability of malignancy in Chinese patients with solid solitary pulmonary nodule (SPN).Materials and MethodsA primary cohort of 1798 patients with pathologically confirmed solid SPNs after surgery was retrospectively studied at five institutions from January 2014 to December 2015. A nomogram based on independent prediction factors of malignant solid SPN was developed. Predictive performance also was evaluated using the calibration curve and the area under the receiver operating characteristic curve (AUC).ResultsThe mean age of the cohort was 58.9 ± 10.7 years. In univariate and multivariate analysis, age; history of cancer; the log base 10 transformations of serum carcinoembryonic antigen value; nodule diameter; the presence of spiculation, pleural indentation, and calcification remained the predictive factors of malignancy. A nomogram was developed, and the AUC value (0.85; 95%CI, 0.83‐0.88) was significantly higher than other three models. The calibration cure showed optimal agreement between the malignant probability as predicted by nomogram and the actual probability.ConclusionsWe developed and validated a nomogram that can estimate the pretest probability of malignant solid SPNs, which can assist clinical physicians to select and interpret the results of subsequent diagnostic tests.