Citations

Abstract Photogrammetry scans has directed attention to the development of advanced camera systems to improve the creation of three-dimensional (3D) models, especially for educational and medical-related purposes. This could be a potential cost-effective method for neuroanatomy education, especially when access to laboratory-based learning is limited. The aim of this study was to describe a new photogrammetry system based on a 5 Digital Single-Lens Reflex (DSLR) cameras setup to optimize accuracy of neuroanatomical 3D models. One formalin-fixed brain and specimen and one dry skull were used for dissections and scanning using the photogrammetry technique. After each dissection, the specimens were placed inside a new MedCreator® scanner (MedReality, Thyng, Chicago, IL) to be scanned with the final 3D model being displayed on SketchFab® (Epic, Cary, NC) and MedReality® platforms. The scanner consisted of 5 cameras arranged vertically facing the specimen, which was positioned on a platform in the center of the scanner. The new multi-camera system contains automated software packages, which allowed for quick rendering and creation of a high-quality 3D models. Following uploading the 3D models to the SketchFab® and MedReality® platforms for display, the models can be freely manipulated in various angles and magnifications in any devices free of charge for users. Therefore, photogrammetry scans with this new multi-camera system have the potential to enhance the accuracy and resolution of the 3D models, along with shortening creation time of the models. This system can serve as an important tool to optimize neuroanatomy education and ultimately, improve patient outcomes.

Abstract White matter dissection (WMD) involves isolating bundles of myelinated axons in the brain and serves to gain insights into brain function and neural mechanisms underlying neurological disorders. While effective, cadaveric brain dissections pose certain challenges mainly due to availability of resources. Technological advancements, such as photogrammetry, have the potential to overcome these limitations by creating detailed three-dimensional (3D) models for immersive learning experiences in neuroanatomy. Objective: This study aimed to provide a detailed step-by-step WMD captured using two-dimensional (2D) images and 3D models (via photogrammetry) to serve as a comprehensive guide for studying white matter tracts of the brain. One formalin-fixed brain specimen was utilized to perform the WMD. The brain was divided in a sagittal plane and both cerebral hemispheres were stored in a freezer at -20°C for 10 days, then thawed under running water at room temperature. Micro-instruments under an operating microscope were used to perform a systematic lateral-to-medial and medial-to-lateral dissection, while 2D images were captured and 3D models were created through photogrammetry during each stage of the dissection. Dissection was performed with comprehensive examination of the location, main landmarks, connections, and functions of the white matter tracts of the brain. Furthermore, high-quality 3D models of the dissections were created and housed on SketchFab®, allowing for accessible and free of charge viewing for educational and research purposes. Our comprehensive dissection and 3D models have the potential to increase understanding of the intricate white matter anatomy and could provide an accessible platform for the teaching of neuroanatomy.

Purpose of review The purpose of this review is to provide a comprehensive anatomical appraisal of the neurosurgical anatomy exposed through the endonasal and paranasal sinuses routes, focusing on the most common expanded endonasal approaches (EEAs) as well as recent advances in this surgical field. Recent findings The EEAs are redefining the management of skull base pathology. Neurovascular structures previously considered a limitation, can be now approached through these surgical corridors. Advances in this field include the development of new surgical techniques and routes that allow better visualization and access to pathologies located in the ventral skull base. Understanding the surgical anatomy related to EEAs is essential not only for neurosurgeons but also for rhinologists. Summary Knowledge of the surgical anatomy of the most common EEAs that utilize paranasal sinuses as a surgical corridor enables more effective management of complex skull base pathologies. Comprehensive anatomical knowledge of these corridors and the surrounding neurovascular structures is crucial to maximize benefits of EEAs and improve outcomes.

BACKGROUND AND OBJECTIVES: The infratemporal fossa (ITF) is a complex region bounded by the temporal bone, maxilla, sphenoid, pterygoid plates, and mandibular ramus. Containing a high density of neurovascular and musculoskeletal structures, the ITF can house a number of pathologies, and access is challenging. The ITF approach and its variations can be challenging due to complex anatomy and unfamiliarity by many surgeons. The objective of this study was to present a step-by-step 3-dimensional anatomic dissection for the classic Fisch Type A and modified ITF approach from the surgeon's perspective. METHODS: Six sides of 3 formalin-fixed latex-injected specimens were dissected under microscopic magnification (JRD and AMN). Standard Fisch Type A and modified ITF approaches were performed on contralateral sides of each specimen. Representative high-quality 3-dimensional photography was performed for each key step. RESULTS: The ITF approach affords excellent access to the posterior ITF and jugular foramen. Modifications to this approach include preservation of the ear canal and limiting facial nerve transposition, thus limiting morbidity while generally still providing sufficient access to key anatomic structures. CONCLUSION: The ITF approach provides access to the lateral skull base for jugular foramen paraganglioma and other lesions. Modifications of the classic Fisch Type A technique can be used to access pathologies in this region without sacrificing conductive hearing or facial nerve function. Three dimensional operatively oriented neuroanatomy dissections provide surgeons with a valuable resource for learning this complex surgical approach.

Abstract Introduction The transbasal approach traditionally uses a bicoronal scalp incision with bifrontal craniotomy to establish an extradural midline skull base working corridor. Depending on additional craniofacial osteotomies, this approach can expand its reach to the nasal cavity and paranasal sinuses and may be employed for the resection of particularly complex sinonasal and midline skull base tumors. Given its discrepancy in nomenclature and differences in interoperator technique, we propose a practical, operatively oriented guide for trainees performing this approach. Methods Three formalin-fixed, latex-injected specimens were dissected under microscopic magnification and endoscopic-assisted visualization. Stepwise dissections of the transcranial-transbasal approach with common modifications were performed, documented with three-dimensional photography, and supplemented with representative case applications. Results The traditional transbasal approach via bifrontal craniotomy affords wide extradural access to the anterior cranial fossa and central skull base. The addition of craniofacial osteotomies further expands access into the sinonasal cavities, clivus, and craniocervical junction. Key steps described include patient positioning, bicoronal skin incision, pericranial graft harvest, bifrontal craniotomy, orbital rim osteotomy, sphenoidotomy, bilateral ethmoidectomies, and microsurgical dissection of the sellar region. Basal superior sagittal sinus ligation and durotomy allow for intradural exposure. Reconstruction techniques are also discussed. Conclusion While the transbasal approach is rich with historical descriptions, illustrations, and modifications, its stepwise performance may be relatively unknown and unclear to younger generations of trainees. We present a comprehensive guide to optimize familiarity with the transbasal approach and its indications in the surgical anatomy laboratory, mastery of the relevant microsurgical anatomy, and simultaneous preparation for learning and participation in the operating room.

Abstract Introduction The development of endoscopic techniques has made endoscopic endonasal approaches (EEAs) to the anterior cranial fossa (ACF) increasingly popular. Still, the steps and nuances involved in the approach may be difficult to understand for trainees. Thus, we aim to didactically describe the EEAs to the ACF in an anatomically based, step-by-step manner with supplementary clinical cases. Methods Six cadaveric head specimens were dissected. Endoscopic endonasal Draf I, IIA, IIB, and III frontal sinusotomies, endoscopic endonasal superior ethmoidectomy, and endoscopic endonasal transcribriform and transplanum approaches were modularly performed. The specimens were photodocumented with endoscopic techniques. Results Draf I frontal sinusotomy started with the complete removal of the anteromedial portion of the agger nasi cell, exposing the medial orbital wall, cranial base, and anterior cribriform plate. Draf II frontal sinusotomy proceeded with the removal of the floor of the frontal sinus between the lamina papyracea and the middle turbinate (IIa), and the nasal septum (IIb) until the first olfactory filaments were exposed. Draf III proceeded by creating a superior septal window just below the floor of the frontal sinus. The bone of the ACF bounded by the limbus sphenoidale posteriorly, frontal sinus anteriorly, and the medial orbital walls bilaterally was removed; the cribriform plate was removed; and the crista galli was dissected free from the dural leaflets of the falx cerebri and removed. Conclusion We provide a step-by-step dissection describing basic surgical steps and anatomy of the EEAs to the ACF to facilitate the learning process for skull base surgery trainees.