Citations

Abstract Background: Mutations in RAS is reported in embryonal rhabdomyosarcoma (ERMS). Upregulation of IGF2/IGF1R axis and IGF2 overexpression is a common finding. Targeting RAS downstream is associated with high toxicity. Combination therapies targeting parallel pathways is necessary to overcome treatment resistance. Dual inhibition of RAS downstream and IGF2/IGF1R axis can be a potential mechanism of targeted treatment. The efficacy of this mechanism was studied using a microcancer 3D exvivo tumor cell viability assay in a KRAS mutant ERMS. Design: Tumor was collected for a high-risk pediatric ERMS patient. Comprehensive genomic analysis, for identification of targetable genomic alterations, was performed by integrating WES, MPseq and RNAseq. Tumor spheroids grown in 3D environment were tested against multiple single drugs and combinations. The tumor viability was assed employing the Cell Titer Glow Luminescent Cell Viability Assay. Results were expressed as nMATP and were shown as drug-response curve exhibiting the ATP concentration changes at Cmax. Results: Genomic findings included an oncogenic KRAS (G12D) mutation. BAY-293 has a partial cell killing response as a single agent. Given to the presence of IGF2 over-expression, IGF2/IGF1R pathway was targeted by linsitinib. Addition of BAY-293 to linsitinib led to enhanced effectiveness of this agent (Table 1). Conclusion: Combination of comprehensive genomic profiling and a laboratory-based 3D micro-cancer model using the patient’s own tumor is an effective way to determine drug efficacy. Targeting RAS pathway by single agents, increases the possibility of resistance. Dual targeting of downstream pathways by MEK and PI3K pathway inhibition is highly toxic, and the clinical usage of this combination is limited. Our results have indicated inhibition of IGF-1R/IGF2 axis in combination with other agents targeting RAS pathway, can be a potential method to address these limitations. ABEL 1. Summary of molecular alterations and targeting methods Molecular alteration Drug Target Kill% at Cmax KRAS (G12D) Mutation BAY-293 RAS-SOS1 interaction 55.3 Trametinib MEK1/2 88.3 Selumetinib MEK1/2 76 Paxalisib PI3K/mTOR 89.7 Samotolisib PI3K/mTOR 92.9 Copanlisib PI3K 95.2 Perifosine AKT 89.2 IGF2 Over-expression Linsitinib IGF-1R/InsR 84.1 BMS-754807 IGF-1R/InsR 67.4 NTRK2 mutation Larotrectinib NTRK 41.9 KMT2D mutation Panobinostat HDAC 85.3 Combinations Kill% at Cmax BAY-293+Selumetinib 100 BAY-293+Samotolisib 100 BAY-293+Paxalisib 99.7 BAY-293+Linsitinib 97.5 Selumetinib+Samotolisib 93.1 Citation Format: Dorsay Sadeghian, Wan-Hsin Lin, James Smadbeck, Alan Panheiter, Michael Barrett, Alexa F. Mccune, Giannoula Karagouga, Sarah Johnson, Ryan W. Feathers, Faye R. Harris, Lindsey Kinsella, Taylor Berry, John Cheville, Panos Anastasiadis, Candace Granberg, Patricio Gargollo, Vasmatzis George. Dual inhibition of RAS and the IGF2/IGF1R pathways: a potential targeting strategy for RAS-mutated embryonal rhabdomyosarcoma [abstract]. In: Proceedings of the American Association for Cancer Research Annual Meeting 2023; Part 1 (Regular and Invited Abstracts); 2023 Apr 14-19; Orlando, FL. Philadelphia (PA): AACR; Cancer Res 2023;83(7_Suppl):Abstract nr 3391.

9029 Background: Molecular biomarkers such as EML4-ALK fusion variant 3 (V3) and TP53 mutation are associated with poor prognosis in patients (pts) with anaplastic lymphoma kinase fusion positive ( ALK+) non–small cell lung cancer (NSCLC). We evaluated the effect of EML4-ALK fusion variants and TP53 mutation status on time to treatment discontinuation (TTD) of first-line (1L) treatment with a next-generation ALK tyrosine kinase inhibitor (TKI) in pts with ALK+ NSCLC in the real-world setting. Methods: Pts with advanced/metastatic NSCLC who were ALK+ in circulating tumor DNA by Guardant360 (G360) liquid biopsy test from Jan 1, 2018, to Dec 31, 2021, and received 1L monotherapy with a next-generation ALK TKI (alectinib, brigatinib, ceritinib, lorlatinib) were identified in the Guardant INFORM clinical-genomics database. Median TTD of 1L ALK TKI treatment was determined by Kaplan-Meier (KM) methods. The impact of EML4-ALK fusion variant and TP53 mutation status on TTD was evaluated. Results: Database search identified 495 pts with advanced/metastatic NSCLC who had ALK fusion by G360; of these, 214 pts received 1L treatment with a next-generation ALK TKI; 164 had G360 testing before treatment (alectinib, n=147; brigatinib, n=7; ceritinib, n=2; lorlatinib, n=8). Among these 164 pts, median age was 58.6 y, 53% were female, and 29% had baseline brain metastases. Median follow-up from start of 1L treatment was 14.8 mo. Median TTD was 19.6 mo (95% CI: 13.6–not reached [NR]). TP53 mutations were detected in 66 pts (40%). Median (95% CI) TTD in pts with TP53 mutation vs WT was 17.1 (9.5–28.5) vs 21.9 mo (14.3–NR; log-rank P=0.1712). Of 130 pts with EML4-ALK fusion variant type detected, 63 (48%) had V1, 54 (42%) V3, 8 (6%) V2, 4 (3%) V5, and 1 (1%) V8. In pts with EML4-ALK fusion V1 vs V3, median (95% CI) TTD was 19.0 (13.6–NR) vs 21.8 mo (8.7–NR; HR: 0.73; log-rank P=0.3039), with the KM plot showing numerically longer TTD in pts with V1 vs V3 during the first 18 mo and lines crossing at the tail end. Of 117 pts with both an EML4-ALK fusion variant (V1/V3) and TP53 data, 21 (18%) had both V3 and a TP53 mutation. Pts with co-occurring EML4-ALK V3 and TP53 mutation had the shortest TTD (median TTD 8.7 [3.9–NR; HR: 2.59; P=0.0219]; Table). Conclusions: Among pts with NSCLC and ALK fusion, co-occurrence of EML4-ALK V3 and TP53 mutation is common and associated with poor prognosis and high risk of early discontinuation of 1L treatment with a next-generation ALK TKI, most likely due to disease progression. Additional novel or combination therapies are warranted for this subpopulation. [Table: see text]

Summary: Asian rhinoplasty generally requires augmentation procedures rather than reduction. Alloplastic grafts are fraught with higher complication rates. Autologous cartilage grafts are safer. However, Asian patients typically do not have adequate septal cartilages, and other autologous cartilage grafts may cause surgical site morbidities, prolonged surgical time, and complications, including warping and infection. Asian rhinoplasties were performed using fresh frozen cartilage by the senior author. Patients’ demographics and medical histories were recorded. Anthropometric measurements (nasofrontal angle, nasofacial angle, nasolabial angle, and Goode ratio) were taken on two-dimensional photographs. FACE-Q scales were used to assess patient-reported outcomes. Five Asian patients underwent rhinoplasty using the fresh frozen cartilage and were followed up for an average period of 14.2 ± 3.35 months. There was no resorption, warping, or infection. Anthropometric measurements showed no significant changes 2–4 months or 8–20 months after surgery. At the time of the 1-year follow-up, mean FACE-Q Satisfaction with Nose, and Satisfaction with Nostrils scores improved from 35.2 ± 10.06 to 60 ± 15.48 (P = 0.0002), and 42.6 ± 20.31 to 59.8 ± 38.21 (P = 0.12), respectively. Fresh frozen cadaveric cartilage is a novel option for Asian rhinoplasty. Our study demonstrated its safety and satisfying surgical outcomes.

AbstractBackgroundThis retrospective study gathered medical/pharmacy claims data on patients with inflammatory bowel disease (IBD) between January 01, 2000 and March 31, 2019 from the IBM MarketScan commercial claims database to assess the real-world impact of fatigue on healthcare costs in patients newly diagnosed with IBD.MethodsEligible participants were ≥18 years, newly diagnosed with IBD (≥2 separate claims), and had ≥12 months of continuous database enrollment before and after fatigue diagnosis. The date of fatigue diagnosis was the index date; participants were followed for 12 months post-index. Patients with (cases) or without (controls) fatigue were matched 1:1 by propensity score matching. Patients with evidence of prior IBD diagnosis/treatment, or those with a chronic disease other than IBD wherein fatigue is the primary symptom, were excluded. Healthcare resource utilization (HCRU), including hospitalizations, inpatient and outpatient visits, and associated costs were compared between cases and controls.ResultsMatched IBD cohorts (21 321 cases/21 321 controls) were identified (42% Crohn’s disease [CD] and 58% ulcerative colitis [UC]) with similar baseline characteristics (average age: 46 years; 60% female). Cases versus controls had significantly more all-cause outpatient visits (incidence rate ratio [IRR], 95% confidence intervals [95% CI]: 1.64 [1.61, 1.67], P < .001) and all-cause hospitalizations (IRR [95% CI]: 1.92 [1.81, 2.04], P < .001); as well as significantly higher all-cause total direct healthcare costs (mean: $24 620 vs. $15 324; P < .001). Similar findings were observed for IBD-related outcomes, as well as in CD- and UC-specific subgroups.ConclusionsPresence of fatigue is associated with an increase in HCRU and total medical costs among patients newly diagnosed with IBD.

The CRISPR-Cas9 system has enabled researchers to precisely modify/edit the sequence of a genome. A typical editing experiment consists of two steps: (1) editing cultured cells; (2) cell cloning and selection of clones with and without intended edit, presumed to be isogenic. The application of CRISPR-Cas9 system may result in off-target edits, whereas cloning will reveal culture-acquired mutations. We analyzed the extent of the former and the latter by whole genome sequencing in three experiments involving separate genomic loci and conducted by three independent laboratories. In all experiments we hardly found any off-target edits, whereas detecting hundreds to thousands of single nucleotide mutations unique to each clone after relatively short culture of 10–20 passages. Notably, clones also differed in copy number alterations (CNAs) that were several kb to several mb in size and represented the largest source of genomic divergence among clones. We suggest that screening of clones for mutations and CNAs acquired in culture is a necessary step to allow correct interpretation of DNA editing experiments. Furthermore, since culture associated mutations are inevitable, we propose that experiments involving derivation of clonal lines should compare a mix of multiple unedited lines and a mix of multiple edited lines.

AbstractPurposeProton treatment plan perturbation by common dental fixtures such as amalgams (Am) and porcelain‐fused‐to‐metal (PFM) crowns has, to date, been uncharacterized. Previous studies have been conducted to determine the physical effect of these materials within the beam path for single spots, but their effects on complex treatment plans and clinical anatomy have not yet been quantified. The present manuscript aims to study the effect of Am and PFM fixtures on proton treatment planning in a clinical setting.MethodsAn anthropomorphic phantom with removable tongue, maxilla, and mandible modules was simulated on a clinical computed tomography (CT) scanner. Spare maxilla modules were modified to include either a 1.5 mm depth central groove occlusal amalgam (Am) or a porcelain‐fused‐to‐metal (PFM) crown, implanted on the first right molar. Modified tongue modules were 3D printed to accommodate several axial or sagittal oriented pieces of EBT‐3 film. Clinically representative spot‐scanning proton plans were generated in Eclipse v.15.6 using the proton convolution superposition (PCS) algorithm v.15.6.06 using a multi‐field optimization (MFO) technique with the goal of delivering a uniform 54 Gy dose to a clinical target volume (CTV) typical of a base‐of‐tongue (BoT) treatment. A typical geometric beam arrangement of two anterior oblique (AO) beams and a posterior beam was employed. Plans optimized without any material overrides were delivered to the phantom A) without implants; B) with Am fixture; or C) with PFM crown. Plans were also reoptimized and delivered with inclusion of material overrides to equate relative stopping power of the fixture with that of a previously measured result.ResultsPlans exhibit slightly greater dose weight towards AO beams. The optimizer accounted for inclusion of fixture overrides by increasing beam weights to the beam closest to the implant. Film measurements exhibited cold spots directly within the beam path through the fixture in plans with and without overridden materials. Cold spots were somewhat mitigated in plans including overridden materials in the structure set but were not entirely eliminated. Cold spots associated with Am and PFM fixtures were quantified at 17% and 14% for plans without overrides, respectively, and 11% and 9% with using Monte Carlo simulation. Compared with film measurements and Monte Carlo simulation, the treatment planning system underestimates the dose shadowing effect in plans including material overrides.ConclusionsDental fixtures create a dose shadowing effect directly in line with the beam path through the material. This cold spot is partially mitigated by overriding the material to measured relative stopping powers. Due to uncertainties in modeling perturbation through the fixture, the magnitude of the cold spot is underestimated using the institutional TPS when compared to measurement and MC simulation.