Citations

Institution: Mayo Clinic Clear

Showing 10 of 108119 citations.

Understanding the course of Peyronie's disease
Garaffa, Giulio , Trost, Landon , Şerefoğlu, Ege Can , Ralph, David , Hellstrom, Wayne J.G.

International Journal of Clinical Practice | July 22, 2013 | Volume: 67 | Issue: 8 | Pages: 781-788

10.1111/ijcp.12129 | PMID 23869679 Get It

Repair of Acute Inferior Wall Myocardial Infarction-Related Basal Ventricular Septal Defect: Transatrial versus Transventricular Approach
Sharma, Vikas , Greason, Kevin L. , Schaff, Hartzell V. , Burkhart, Harold M. , Park, Soon J., Suri, Rakesh M. , Nkomo, Vuyisile T. , Dearani, Joseph A. , Schaff, Hartzell

Journal of Cardiac Surgery | July 22, 2013 | Volume: 28 | Issue: 5 | Pages: 475-480

10.1111/jocs.12156 | PMID 23870081 Get It

Downregulation of Hematopoietic MUC1 during Experimental Colitis Increases Tumor-Promoting Myeloid-Derived Suppressor Cells
Poh, Tze Wei, Madsen, Cathy S., Gorman, Jessica E., Marler, Ronald J., Leighton, Jonathan A. , Cohen, Peter A. , Gendler, Sandra

Clinical Cancer Research | July 20, 2013 | Volume: 19 | Issue: 18 | Pages: 5039-5052

10.1158/1078-0432.ccr-13-0278 | PMID 23873692 Get It

Abstract Purpose: MUC1 is a tumor-associated antigen that is aberrantly expressed in cancer and inflammatory bowel disease (IBD). Even though immune cells express low MUC1 levels, their modulations of MUC1 are important in tumor progression. Consistent with previous clinical data that show increased myeloid-derived suppressor cells (MDSCs) in IBD, we now show that downregulation of MUC1 on hematopoietic cells increases MDSCs in IBD, similar to our data in tumor-bearing mice. We hypothesize that MDSC expansion in IBD is critical for tumor progression. Experimental Design: To mechanistically confirm the linkage between Muc1 downregulation and MDSC expansion, we generated chimeric mice that did not express Muc1 in the hematopoietic compartment (KO→WT). These mice were used in two models of colitis and colitis-associated cancer (CAC) and their responses were compared with wild-type (WT) chimeras (WT→WT). Results: KO→WT mice show increased levels of MDSCs during colitis and increased protumorigenic signaling in the colon during CAC, resulting in larger colon tumors. RNA and protein analysis show increased upregulation of metalloproteinases, collagenases, defensins, complements, growth factors, cytokines, and chemokines in KO→WT mice as compared with WT→WT mice. Antibody-mediated depletion of MDSCs in mice during colitis reduced colon tumor formation during CAC. Conclusion: Development of CAC is a serious complication of colitis and our data highlight MDSCs as a targetable link between inflammation and cancer. In addition, the lack of MUC1 expression on MDSCs can be a novel marker for MDSCs, given that MDSCs are still not well characterized in human cancers. Clin Cancer Res; 19(18); 5039–52. ©2013 AACR.
Novel Cyclotron-Based Radiometal Production [Poster]
DeGrado, Timothy R. , USDOE, USDOE

No container title available | July 19, 2013 | Volume: No volume available | Issue: No issue available | Pages: No page available

10.2172/1087664 Get It

Validation of Static and Dynamic Activity Detection Using a Tri-Axial Accelerometer and Video
Lugade, Vipul , Kaufman, Kenton R. , Fortune, Emma , Morrow, Melissa M. , Kaufman, Kenton R

ASME 2012 Summer Bioengineering Conference, Parts A and B | July 19, 2013 | Volume: No volume available | Issue: No issue available | Pages: 1067-1068

10.1115/sbc2012-80488 Get It

Recording body accelerations has been investigated previously to monitor health, metabolic energy expenditure, postural sway and falls [1]. Activity monitoring and the subsequent analysis of the accelerometry data have also proven useful in detecting physical activity levels among Parkinson’s [2] and osteoarthritis patients [3].
Noninvasive Surface Wave Method for Measuring Skin Viscoelasticity
Zhang, Xiaoming , Kinnick, Randall R., Pittelkow, Mark R. , Osborn, Thomas G. , Greenleaf, James F. , Zhang, Xiaoming

ASME 2009 Summer Bioengineering Conference, Parts A and B | July 19, 2013 | Volume: No volume available | Issue: No issue available | Pages: 681-682

10.1115/sbc2009-206517 Get It

Characterization of the viscoelastic mechanical properties of skin is important for improving accurate medical examination and diagnosis of disorders involving cutaneous and subcutaneous tissues; more thoroughly understanding skin biophysical and physiological properties; identifying normal and abnormal skin aging and disease processes; developing and applying improved pharmacologic and other therapeutic interventions; as well as cosmetic applications. Several noninvasive methods have been developed for measurement of mechanical properties of skin [1]. However, most methods measure a stiffness parameter but not the material properties of skin. For example, the suction method measures the displacement of skin in response to suction. The measurement is dependent on the aperture and fixation of probes and also difficult to interpret.
Validation of a Finite Element Model of Passive Force and Pressure in Skeletal Muscle
Morrow, Duane A., Donahue, Tammy L. Haut , Odegard, Gregory M. , Kaufman, Kenton R. , Kaufman, Kenton R

ASME 2009 Summer Bioengineering Conference, Parts A and B | July 19, 2013 | Volume: No volume available | Issue: No issue available | Pages: 339-340

10.1115/sbc2009-206211 Get It

Intramuscular pressure (IMP) has been put forth as a surrogate measure for muscle force. As technological advancements have lead to the creation of smaller IMP microsensors, obtaining IMP readings in the clinic has come closer to becoming a minimally-invasive reality. However, appropriate use of data from these sensors relies upon an understanding of the mechanism of pressure changes within skeletal muscle. To that end, a constitutive model, representing muscle as a transversely isotropic, hyperelastic, and isovolumetric was created [1] for implementation in a finite element simulation. The purpose of this study was to validate this constitutive muscle model with passive elongation tests of skeletal muscle tissue from New Zealand White (NZW) rabbits. Reaction forces and hydrostatic pressures resulting from applied deformations were determined with the finite element modeling (FEM) approach and were compared with previously published experimental data [2].
Internal Pressure of the Human Meniscal Attachments During Physiological and Pathological Loading
Abraham, Adam C. , Kaufman, Kenton R. , Donahue, Tammy L. Haut , Kaufman, Kenton R

ASME 2012 Summer Bioengineering Conference, Parts A and B | July 19, 2013 | Volume: No volume available | Issue: No issue available | Pages: 451-452

10.1115/sbc2012-80742 Get It

Knee menisci are semi-lunar, fibrocartilaginous structures that convert applied compressive loads to circumferential hoop stresses which are attenuated at the tibial plateau via the meniscal attachments [1]. These specialized interfaces, located at the lateral anterior (LA), lateral posterior (LP), medial anterior (MA), and medial posterior (MP) horns, are crucial to maintaining mechanical functionality of menisci, thereby preventing osteoarthritis [2]. Soft-tissues subjected to compression and shear loads are known to possess proteoglycans, which aid in resisting these applied stresses by retaining interstitial fluid [1]. Interestingly, proteoglycans are also known to be present at the meniscus to bone interface [3]. Despite the presence of these biphasic attachments and their important role in joint load transfer, there have been no quantitative investigations of the mechanical environment within these attachments under physiological and pathological loads. Recent development of a novel pressure microsensor now allows direct observation of fluid pressure, which will aid in understanding the internal mechanical environment within the attachment sites. Previous work indicates that the attachment sites are geometrically, mechanically, and histologically different [4], thus it is hypothesized that the fluid pressures would likewise differ.
CFD Challenge Solution Using the Commercial Finite Volume Solver Fluent
Kallmes, David F. , Dragomir‐Daescu, Dan , Hodis, Simona

ASME 2012 Summer Bioengineering Conference, Parts A and B | July 19, 2013 | Volume: No volume available | Issue: No issue available | Pages: 141-142

10.1115/sbc2012-80564 Get It

The Modeling and Analysis group in the Division of Engineering at Mayo Clinic, Rochester works in the area of numerical modeling and experimental validation of cerebral aneurysms. In our modeling we use patient-specific geometries from imaging studies provided by Dr. Kallmes. The CFD analysis is performed with commercial packages Mimics (Materialise, Leuven, Belgium), for segmentation and ANSYS (ANSYS Inc. Canonsburg, PA) for meshing, simulation and post-processing. The experiments are conducted using a tomographic Particle Image Velocimetry system from LaVision Inc. The group is led by Dan Dragomir-Daescu, PhD and David F. Kallmes, MD and consists of two postdoctoral fellows and three engineers. For this project, CFD simulations were performed by postdoctoral fellow Simona Hodis, using the finite volume based solver Fluent.
Step Count Validation of a Tri-Axial Accelerometer During Walking and Jogging
Lugade, Vipul , Kaufman, Kenton R. , Fortune, Emma , Morrow, Melissa M. , Kaufman, Kenton R

ASME 2012 Summer Bioengineering Conference, Parts A and B | July 19, 2013 | Volume: No volume available | Issue: No issue available | Pages: 1065-1066

10.1115/sbc2012-80486 Get It

Gait analysis is an important tool in assessing the health and activity levels of patients and regular physical activity has been associated with health improvements in a number of populations. Step counting is one of the most commonly used measures of physical activity [1] and many studies have investigated the use of wearable sensors for step counts [2–4]. Their small size and light weight mean that they may be used in a free living environment and are suitable for home deployment. One of the main issues associated with step counts as a measure of physical activity is that a very high level of accuracy in step detection is needed.