Hevesi, Mario

Abstract Acetabular labral tears are commonly diagnosed in patients with hip or groin pain, most of which occur anterosuperiorly. In some cases, operative intervention in the form of arthroscopic labral repair may be necessary to restore labral function. Posterolateral tears can be technically challenging when using traditional modified anterior portal and anterolateral (AL) portal access owing to a suboptimal drill trajectory. In this article, we describe the establishment of a posterolateral (PL) portal 1 to 2 cm posterior to the tip of the greater trochanter, mirroring the distal‐to‐proximal trajectory of the AL portal and entering the capsulotomy at the 10‐o'clock position. This method highlights that the PL portal is used for drilling and anchor placement, whereas the remaining work is performed through the AL portal. This avoids the use of any shavers or burrs in the PL portal near important neurovascular structures, including the sciatic nerve. Addressing posterolateral labral tears in the 9‐ to 11‐o'clock position using a PL portal can enhance labral fixation, thereby mitigating the risk of suboptimal repairs that can negatively impact postoperative outcomes. Technique Video video See video under supplementary data.

Background: Lateral meniscal oblique radial tears (LMORTs) are the most common type of lateral meniscal tears and occur concomitantly with anterior cruciate ligament (ACL) tears in up to 12% of cases. Four types of LMORTs have been classified in the literature based on proximity to the meniscal root and extent of the tear. Type 1 and 2 LMORTs represent partial and complete posterior root tears less than 10 mm from the root insertion. Type 3 and 4 LMORTs are partial and complete posterior radial meniscus tears greater than 10 mm from the root insertion. Indications: Type 3 and 4 LMORTs can and should be addressed with an all-inside side-to-side repair at the time of ACL reconstruction. LMORTs that are not repaired at the time of ACL reconstruction can contribute to persistent instability and meniscal extrusion. Technique Description: Diagnostic arthroscopy is performed to evaluate the posterior aspects of both the medial and lateral meniscus. The medial leaflet is commonly flipped into the notch and scarred to ACL remnant. After identifying and isolating the medial leaflet, an arthroscopic suture passer is used to pass a suture from inferior to superior through the medial leaflet. A second suture is passed from inferior to superior through the lateral leaflet. This is used to shuttle the suture pass through the medial leaflet to the bottom of the meniscus, where it can be tied in a horizontal mattress fashion. The sutures are tied down with aide of an arthroscopic knot pusher. A second set of sutures is passed and used to shuttle a second suture that would be tied posterior to the first suture, again in a horizontal mattress fashion. This allows reduction of the fragments in apposition across the tear. Postoperatively, patients are allowed range of motion from 0° to 90° and to toe touch weightbearing for the first 4 weeks. Patients are advanced to weightbearing as tolerated at 5 weeks. Typical return to sport ranges from 6 to 9 months postoperatively. Results: Results have been published for 2-year outcomes of type 3 and 4 LMORT repairs and have demonstrated persistent improved patient-reported outcomes as well as healing rates that are greater than 80% and in some series approach nearly 100%. Discussion/Conclusion: Arthroscopic all-inside side-to-side surgical repair is a durable and reliable treatment option for patients presenting for ACL reconstruction with concomitant type 3 or 4 LMORT. Patient Consent Disclosure Statement: The author(s) attests that consent has been obtained from any patient(s) appearing in this publication. If the individual may be identifiable, the author(s) has included a statement of release or other written form of approval from the patient(s) with this submission for publication.

Purpose To investigate the feasibility and accuracy of 3‐dimensional (3D) iPhone scans using commercially available applications compared with computed tomography (CT) for mapping chondral surface topography of the knee. Methods Ten cadaveric dysplastic trochleae, 16 patellae, and 24 distal femoral condyles (DFCs) underwent CT scans and 3D scans using 3 separate optical scanning applications on an iPhone X. The 3D surface models were compared by measuring surface‐to‐surface least distance distribution of overlapped models using a validated 3D‐3D registration volume merge method. The absolute least mean square distances for the iPhone‐generated models from each scanning application were calculated in comparison to CT models using a point‐to‐surface distance algorithm allowing regional “inside/outside” measurement of the absolute distance between models. Results Only 1 of the 3 scanning applications created models usable for quantitative analysis. Overall, there was a median absolute least mean square distance between the usable model and CT‐generated models of 0.18 mm. The trochlea group had a significantly lower median absolute least mean square distance compared with the DFC group (0.14 mm [interquartile range, 0.13‐0.17] vs 0.19 mm [0.17‐0.25], P = .002). iPhone models were smaller compared with CT models (negative signed distances) for all trochleae, 83% of DFCs, and 69% of patellae. Conclusions In this study, we found minimal differences between a 3D iPhone scanning application and conventional CT scanning when analyzing surface topography. Clinical Relevance Emerging 3D iPhone scanning technology can create accurate, inexpensive, real‐time 3D models of the intended target. Surface topography evaluation may be useful in graft selection during surgical procedures such as osteochondral allograft transplantation.

Purpose To report the clinical outcomes and reoperation rates of arthroscopic and endoscopic iliopsoas release at short‐term follow‐up after ipsilateral total hip arthroplasty (THA) at 2 separate medical institutions and to evaluate whether demographic and radiographic parameters are associated with postoperative patient‐reported outcomes (PROs). Methods Patients with iliopsoas tendinitis in the setting of prior THA who underwent arthroscopic iliopsoas fractional lengthening from 1988 to 2023 at 2 academic institutions were reviewed. Patients were included if they had 12 months of follow‐up and underwent evaluation of preoperative anterior acetabular component overhang, surgery satisfaction, postoperative subjective hip flexion strength and anterior groin pain improvement, modified Harris Hip Score, Single Assessment Numeric Evaluation score, Tegner activity scale score, visual analog scale (VAS) score, and revision hip arthroplasty. Results Sixty hips in 58 patients (19 male and 39 female patients) were followed up for a mean of 39.3 months (range, 12.0‐105.9 months) postoperatively. Of the patients, 77% reported feeling “much better” or “slightly better,” 75% reported improved anterior groin pain, and 60% reported improved subjective hip flexion strength. The surgery satisfaction rating was 7.2 ± 3.3 (scale of 0 to 10). The mean postoperative modified Harris Hip Score, VAS score for pain at rest, VAS score for pain with use, and Single Assessment Numeric Evaluation score were 73.9 ± 19.4, 1.3 ± 2.4, 3.8 ± 2.9, and 71.9 ± 21.9, respectively. Preoperative anterior acetabular component overhang was 3.3 ± 6.5 mm and did not significantly correlate with postoperative PROs ( P ≥ .45). The Tegner score improved from 2.5 ± 1.7 preoperatively to 2.9 ± 1.4 postoperatively ( P = .0253). Three patients underwent revision arthroplasty at a mean of 25.3 months (range, 11.6‐40.4 months) postoperatively, with an acetabular component revision rate of 3.3%. Conclusions Satisfactory outcomes and low revision arthroplasty rates were observed in patients undergoing arthroscopic iliopsoas lengthening after THA. There was no statistically significant relation between anterior acetabular component overhang and final PROs. Level of Evidence Level IV, therapeutic case series.

Abstract The hip capsule is the primary stabilizer of the hip joint. At the time of hip arthroscopy, the capsule is disrupted to obtain intra‐articular access and proper joint visualization. With the number of patients undergoing primary and revision hip arthroscopy continuing to increase, it is not uncommon for surgeons to encounter patients with iatrogenic capsular deficiency from prior hip arthroscopy. In cases where substantial capsular defects beyond the scope of capsular repair are visualized, reconstruction may be required to obtain satisfactory closure and restore hip stability. We present a step‐by‐step workflow for efficient hip capsular reconstruction with rectus overlay while allowing for facile incorporation of other revision procedures such as labral repair and femoral osteochondroplasty. Technique Video video See video under supplementary data.

Abstract Labral tears most commonly occur anteriorly between the 12‐ and 3‐o'clock positions, with the 12‐o'clock position denoted as superior and the 3‐o'clock position denoted as anterior. When approaching the 3‐o'clock position and beyond, suture anchor placement becomes difficult given the challenging arthroscopic trajectory and an overall thin anterior rim of cortical bone for anchor purchase, resulting in a narrow angle of safe drilling. The purpose of this technical note is to present a safe and reproducible method of suture anchor placement during acetabular labral repair approaching the 3‐ and 4‐o'clock positions, with the 12‐o'clock position representing the superior anatomic location and the 3‐o'clock position representing the anterior anatomic location regardless of hip laterality. We use an inside‐out anchor placement technique to place far medial anchors, which differs from the conventional techniques (e.g., outside‐in technique) in which anchor placement is performed along the external margin of the acetabular labrum. Technique Video video See video under supplementary data.

Background: Hip arthroscopy in patients with borderline hip dysplasia has satisfactory outcomes at short-term follow-up; however, the data on midterm outcomes are inconsistent, and failure rates are high in some studies, limiting understanding of the role and utility of hip arthroscopy in this patient cohort. Purpose: To provide an up-to-date, evidence-based review of the clinical outcomes of primary hip arthroscopy in patients with frank or borderline hip dysplasia at ≥5-year follow-up and report the failure rate and progression to total hip arthroplasty in this cohort. Study Design: Systematic review; Level of evidence, 4. Methods: A comprehensive literature search was performed according to the PRISMA (Preferred Reporting Items for Systematic Reviews and Meta-Analyses) guidelines. Studies were included if they evaluated outcomes of primary hip arthroscopy in patients with lateral center-edge angle (LCEA) <25° at ≥5-year follow-up. Risk of bias assessment was performed using the methodological index for non-randomized studies scoring system. Level of evidence was determined using criteria from the Oxford Centre for Evidence-Based Medicine. Results: Nine studies were included in this review. Patients with LCEA <25° demonstrated satisfactory clinical outcomes, high patient satisfaction, and significant postoperative improvements in patient-reported outcomes (PROs) at follow-up ranging from a ≥5 to 10 years. Studies comparing patients with dysplasia to those without did not demonstrate significant differences in preoperative, postoperative, or delta PROs or in failure, reoperation, or revision rates. There was no overall significant correlation between outcomes and LCEA stratification. Conclusion: Hip arthroscopy in carefully selected patients with LCEA <25° can be successful at mid- to long-term follow-up and may provide clinical outcomes and failure rates comparable with patients with normal LCEA, understanding that this is a singular, 2-dimensional radiographic measure that does not differentiate instability from impingement or combinations thereof, warranting future studies delineating these differences. These findings suggest that hip dysplasia may not be an absolute contraindication for isolated hip arthroscopy and may serve as a viable intervention with consideration of staged future periacetabular osteotomy (PAO). Importantly, this review does not suggest that hip arthroscopy alters the natural history of dysplasia; therefore, patients with dysplasia should be counseled on the potential utility of PAO by appropriate hip preservation specialists.

Background: Matrix-induced autologous chondrocyte implantation (MACI) is an established cell-based therapy for the treatment of chondral defects of the knee. As long-term outcomes are now being reported in the literature, it is important to systematically review available evidence to better inform clinical practice. Purpose: To report (1) subjective patient-reported outcomes (PROs) and (2) the rate of graft failure, reoperation, and progression to total knee arthroplasty (TKA) after undergoing MACI of the knee at a minimum 10-year follow-up. Study Design: Systematic review; Level of evidence, 4. Methods: A comprehensive search of Ovid MEDLINE and Epub Ahead of Print, In-Process & Other Non-Indexed Citations and Daily; Ovid Embase; Ovid Cochrane Central Register of Controlled Trials; Ovid Cochrane Database of Systematic Reviews; and Scopus from 2008 to September 15, 2022, was conducted in the English language. Study eligibility criteria included (1) full-text articles in the English language, (2) patients undergoing a MACI within the knee, (3) clinical outcomes reported, and (4) a minimum 10-year follow-up. Results: In total, 168 patients (99 male, 69 female; mean age, 37 years [range, 15-63 years]; mean body mass index, 26.2 [range, 18.6-39.4]) representing 188 treated chondral defects at a minimum 10-year follow-up after MACI were included in this review. Significant and durable long-term improvements were observed across multiple PRO measures. Follow-up magnetic resonance imaging (MRI), when performed, also demonstrated satisfactory defect fill and an intact graft in the majority of patients. The all-cause reoperation rate was 9.0%, with an overall 7.4% rate of progression to TKA at 10 to 17 years of follow-up. Conclusion: At a minimum 10-year follow-up, patients undergoing MACI for knee chondral defects demonstrated significant and durable improvements in PROs, satisfactory defect fill on MRI-based assessment, and low rates of reoperation and TKA. These data support the use of MACI as a long-term treatment of focal cartilage defects of the knee.

Abstract Meniscal extrusion (ME) is a valuable, noninvasive diagnostic tool for meniscus pathology. In addition, ultrasound can allow for instant results in the office. However, ME is a fragile metric in the degree of millimeters. The inconsistent techniques used by different authors in the literature and the additional operator variability that ultrasound technology introduces make it important a systematic approach is used. The purpose of this study is to propose a reproducible technique. The current authors recommend having the patient in (1) 30° of knee flexion while weight‐bearing, (2) capturing the image at the posterior border of the medial collateral ligament, (3) using a reference line parallel to the articular margin of the tibia, and (4) measuring ME at the coronal midpoint of the outermost edge of the meniscus. Technique Video video See video under supplementary data.

Background: Current classification systems for intra-articular pathology intraoperatively have been described for patients with femoroacetabular impingement rather than dysplasia. Purpose: To (1) describe intra-articular findings in dysplastic hips undergoing combined hip arthroscopy and periacetabular osteotomy (PAO); (2) propose a new chondrolabral classification system for dysplastic hips based on these findings; and (3) correlate patient-reported outcome measures (PROM) with the newly proposed classification. Study Design: Case series; Level of evidence, 4. Methods: A total of 46 hips underwent combined hip arthroscopy and PAO at our institution between September 2013 and December 2014, irrespective of symptoms or radiographic findings. PROMs were evaluated preoperatively and at 2 years postoperatively. At the time of hip arthroscopy, the chondrolabral junction was classified as normal without tear (1 hip, type 1); hypertrophic labrum without chondrolabral disruption (19 hips, type 2); chondrolabral disruption on the articular side, not extending into the capsular side (16 hips, type 3A); chondrolabral disruption extending through the capsular side (3 hips, type 3B); and exposed acetabular subchondral bone (7 hips, type 4). Results: There was a significant difference in postoperative modified Harris Hip Score (mHHS) ( P = .020), Western Ontario and McMaster Universities Osteoarthritis Index (WOMAC) pain scores ( P = .037), and WOMAC total scores ( P = .049) between chondrolabral junction types. Post hoc analyses demonstrated significant differences between type 2 (84.9 ± 12.9) and type 3A (67.8 ± 20.7; P = .198), and between type 2 and type 4 (59.3 ± 24.3; P = .011) in postoperative mHHS scores; and between type 2 (83.9 ± 12.9) and type 3A (68.9 ± 23.7; P = .045) in postoperative WOMAC total scores. In multivariate analysis, chondrolabral type 3 or type 4, age >35 years, and previous surgery were significantly correlated with worse mHHS scores at 2 years. Conclusion: This new chondrolabral classification is proposed to describe intra-articular pathology seen during combined hip arthroscopy and PAO, specifically in dysplastic hips. More advanced chondrolabral disease was associated with worse PROMs at 2 years.