Schilaty, Nathan D.

Background: A recently developed mechanical impact simulator induced an anterior cruciate ligament (ACL) rupture via the application of a combination of inverse dynamics–based knee abduction moment (KAM), anterior tibial shear force (ATS), and internal tibial rotation moment with impulsive compression in a cohort of cadaveric limbs. However, there remains an opportunity to further define the interaction of internal forces and moments at the knee and their respective influence on injury events. Purpose: To identify the influence of internal knee loads on an ACL injury event using a cadaveric impact simulator. Study Design: Controlled laboratory study. Methods: Drop-landing simulations were performed and analyzed on 30 fresh-frozen cadaveric knees with a validated mechanical impact simulator. Internal forces and moments at the knee joint center were calculated using data from a 6-axis load cell recorded on the femur during testing. Kinetic data from a total of 1083 trials that included 30 ACL injury trials were used as inputs for principal component (PC) analysis to identify the most critical features of loading waveforms. Logistic regression analysis with a stepwise selection was used to select the PCs that predicted an ACL injury. Injurious waveforms were reconstructed with selected PCs in logistic regression analysis. Results: A total of 3 PCs were selected in logistic regression analysis that developed a significant model ( P < .001). The external loading of KAM was highly correlated with PC1 (ρ < –0.8; P < .001), which explained the majority (>69%) of the injurious waveforms reconstructed with the 3 selected PCs. The injurious waveforms demonstrated a larger internal knee adduction moment and lateral tibial force. After the ACL was ruptured, decreased posterior tibial force was observed in injury trials. Conclusion: These findings give us a better understanding of ACL injury mechanisms using 6-axis kinetics from an in vitro simulator. An ACL rupture was correlated with an internal knee adduction moment (external KAM) and was augmented by ATS and lateral tibial force induced by an impact, which distorted the ACL insertion orientation. Clinical Relevance: The ACL injury mechanism explained in this study may help target injury prevention programs to decrease injurious knee loading (KAM, ATS, and lateral tibial force) during landing tasks.

Background: The existent literature has well explored knee ligament kinetics and strain at and after initial contact (IC) during landing tasks. However, little is known about knee ligament biomechanics in flight before IC. Purpose: To quantify and compare change in anterior cruciate ligament (ACL) and medial collateral ligament (MCL) strain before IC relative to after IC. Study Design: Descriptive laboratory study. Methods: A total of 40 cadaveric specimens were analyzed after being subjected to simulated landings in a mechanical impact simulator. External joint loads of varying magnitudes were applied to mimic relative injury risk load levels from an in vivo cohort and were coupled with an impulse force to represent initial ground contact. Implanted strain gauges continually recorded ligament strain. Kruskal-Wallis tests evaluated the significance of risk level and pre- and post-IC factors, while Wilcoxon each-pair tests evaluated differences within both factors. Results: Strain responses during simulated landing tasks for the ACL ( P ≥ .545) and MCL ( P ≥ .489) were consistent after IC regardless of the level of relative injury risk simulated in each trial. Before IC, the level of injury risk kinetics applied to a specimen differentiated strain response in the ACL ( P < .001) and MCL ( P < .001), as higher risk profiles produced greater changes in ligament strain. Mean baseline strain was 4.0% in the ACL and 1.0% in the MCL. Mean change in strain from the ACL ranged from 0.1% to 3.9% pre-IC and from 2.9% to 5.7% post-IC, while the MCL ranged from 0.0% to 3.0% pre-IC and from 0.9% to 1.3% post-IC. Conclusion: Within each ligament, post-IC strain response lacked statistical differences among simulated risk profiles, while pre-IC response was dependent on the risk profile simulated. Individually, neither pre- nor poststrain changes were enough to induce ACL failure, but when combined over the course of a full landing task, they could lead to rupture. Clinical Relevance: Prevention and rehabilitation techniques should aim to limit the presence of increased risk biomechanics in flight before landing, as impulse delivery at IC is inevitable.

Objective: Fatigue due to game play is often cited as a factor in musculoskeletal injuries; however, it is unclear whether or not this view is supported by published research findings. Given the importance researchers and practitioners place on the potential effects of game play with respect to injury, it is important to understand what inferences can be drawn from the collective research in this realm. This meta-analysis will consider the time of season and segment of the game, as it relates anterior cruciate ligament (ACL), groin, and hamstring injury occurrence. Data Sources: Database searches were run in PubMed, MEDLINE, SportDiscus, CINAHL, and Ausport, in addition to the inclusion of articles identified manually. Study Selection: Search terms were chosen to identify articles related to each of the 3 injuries of interest. There were no date limitations placed on the articles, as such, all published articles listed in the databases up to November 2017 were eligible for selection if they met the search criteria. Data Extraction: Initial searches yielded 1349 articles, and this was eventually reduced to 15 articles deemed suitable for inclusion in the meta-analysis, which provided 21 data sets. Data Synthesis: Comparing the first half with the second half of the season, there were no differences in ACL, groin, or hamstring injury occurrences [ACL: odds ratio (OR), 1.27; confidence interval (CI), 0.43-3.78, groin: OR, 1.79; CI, 0.63-5.06, and hamstring: OR, 1.16; CI, 0.88-1.53]. Similarly, there were no differences in injury occurrence between the first and second halves of the game for the ACL or hamstring injuries (ACL: OR, 0.43; CI, 0.47-7.92, hamstring: OR, 0.85; CI, 0.58-1.24). Conclusions: Findings from this meta-analysis determined that time in season or time in game does not influence risk of the ACL, groin, or hamstring injury. Commonly, many studies did not provide sufficient detail to be included in the meta-analysis. Consequently, it is recommended that future studies report data related to the timing of the injury within the season or game.

Background: Both the anterior cruciate ligament (ACL) and the medial collateral ligament (MCL) bear load during athletic tasks of landing, cutting, pivoting, and twisting. As dynamic knee valgus is a purported mechanism for ACL injury, the MCL should bear significant strain load with valgus force. Hypothesis: The intact MCL will demonstrate a significant increase in strain upon failure of the ACL at 25° of knee flexion. Study Design: Controlled laboratory study. Methods: In vivo kinetics/kinematics of 44 healthy athletic participants were measured to determine stratification of injury risk (ie, low, medium, and high) in 3 degrees of knee forces/moments (knee abduction moment, anterior tibial shear, and internal tibial rotation). These stratified kinetic values were input into a cadaveric impact simulator to assess ligamentous strain during a simulated landing task. Uniaxial and multiaxial load cells and differential variable reluctance transducer strain sensors were utilized to collect mechanical data for analysis. Conditions of external loads applied to the cadaveric limbs were varied and randomized. Results: ACL strain increased with increased dynamic knee abduction moment (χ 2 [5] = 14.123, P = .0148). The most extreme dynamic knee abduction moment condition demonstrated significantly higher ACL strain compared with lower loaded trials ( P≤ .0203). Similarly, MCL strain increased with dynamic knee abduction moment (χ 2 [5] = 36.578, P < .0001). Matched-pairs analysis compared ACL strain with MCL strain (maximum ACL strain – maximum MCL strain) and demonstrated high strain for the ACL versus the MCL ( S 177 = 6223.5, P < .0001). Conclusion: Although significant, MCL strain had minimal increase with increased dynamic knee abduction moment, and the event of ACL failure did not significantly increase MCL strain when compared with high dynamic knee abduction moment conditions in the cadaveric model. The ACL bears more strain than the MCL at increasing amounts of dynamic knee abduction moment at 25° of knee flexion, which may explain the limited concomitant MCL injury rate that can occur during a dynamic valgus collapse of the knee. Clinical Relevance: These characteristics of ACL and MCL strain are important to understand the mechanisms that drive these injuries at the knee and will improve rehabilitation and injury prevention techniques.

Background: Anterior cruciate ligament (ACL) tears and concomitant medial collateral ligament (MCL) injuries are known to occur during dynamic athletic tasks that place combinatorial frontal and transverse plane loads on the knee. A mechanical impact simulator that produces clinical presentation of ACL injury allows for the quantification of individual loading contributors leading to ACL failure. Purpose/Hypothesis: The objective was to delineate the relationship between knee abduction moment, anterior tibial shear, and internal tibial rotation applied at the knee and ACL strain during physiologically defined simulations of impact at a knee flexion angle representative of initial contact landing from a jump. The hypothesis tested was that before ACL failure, abduction moment would induce greater change in ACL strain during landing than either anterior shear or internal rotation. Study Design: Controlled laboratory study. Methods: Nineteen cadaveric specimens were subjected to simulated landings in the mechanical impact simulator. During simulations, external knee abduction moment, internal tibial rotation moment, and anterior tibial shear loads were derived from a previously analyzed in vivo cohort and applied to the knee in varying magnitudes with respect to injury risk classification. Implanted strain gauges were used to track knee ligament displacement throughout simulation. Kruskal-Wallis tests were used to assess strain differences among loading factors, with Wilcoxon each pair post hoc tests used to assess differences of magnitude within each loading. Results: Each loading factor significantly increased ACL strain ( P < .005). Within factors, the high-risk magnitude of each factor significantly increased ACL strain relative to the baseline condition ( P≤ .002). However, relative to knee abduction moment specifically, ACL strain increased with each increased risk magnitude ( P≤ .015). Conclusion: Increased risk levels of each load factor contributed to increased levels of ACL strain during a simulated jump landing. The behavior of increased strain between levels of increased risk loading was most prevalent for changes in knee abduction moment. This behavior was observed in the ACL and MCL. Clinical Relevance: Knee abduction moment may be the predominant precursor to ACL injury and concomitant MCL injury. As knee abduction occurs within the frontal plane, primary preventative focus should incorporate reduction of frontal plane knee loading in landing and cutting tasks, but secondary reduction of transverse plane loading could further increase intervention efficacy. Constraint of motion in these planes should restrict peak ACL strain magnitudes during athletic performance.

ABSTRACTThe mechanism underlying non‐contact anterior cruciate ligament (ACL) injury is multi‐factorial and still an object of debate. Computational models, in combination with in vivo and cadaveric studies, can provide valuable insight into the contribution of the different factors involved. The goal of this study was to validate four knee finite element models (two males and two females) to kinematic and strain data collected in vitro with an impact‐driven simulator and use them to assess how secondary external knee loads (knee abduction moment [KAM], anterior shear force, and internal rotation torque [ITR]) affect tibiofemoral contact forces and ACL force during impact. Four subject‐specific knee models were developed from specimen computed tomography and magnetic resonance imaging. Patellofemoral and tibiofemoral ligament properties were calibrated to match experimentally measured kinematics and ligament strain. Average root mean square errors and correlations between experimental and model‐predicted knee kinematics were below 1.5 mm and 2°, and above 0.75, respectively. Similar errors and correlations were obtained for ACL strain (< 2% and > 0.9). Model‐predicted ACL forces were highly correlated with the anterior component of the tibiofemoral contact force on the lateral plateau occurring during impact (r = 0.99), which was increased by larger KAM and ITR through the posterior tibial slope and a larger contact force on the lateral side. This study provides a better understanding of the mechanism through which secondary external knee loads increase ACL injury risk during landing. © 2019 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 37:1730–1742, 2019

Background: Anterior cruciate ligament (ACL) injuries are catastrophic events that affect athletic careers and lead to long-term degenerative knee changes. As injuries are believed to occur within the first 50 milliseconds after initial contact during a rapid deceleration task, impact simulators that rapidly deliver impulse loads to cadaveric specimens have been developed. However, no impactor has reproducibly and reliably created ACL injures in a distribution that mimics clinical observation. Purpose: To better understand ACL injury patterns through a cadaveric investigation that applied in vivo–measured external loads to the knee during simulated landings. Study Design: Controlled laboratory study. Methods: A novel mechanical impact simulator reproduced kinetics from in vivo–recorded drop landing tasks on 45 cadaveric knees. Specimens were exposed to a randomized order of variable knee abduction moment, anterior tibial shear, and internal tibial rotation loads before the introduction of an impulse load at the foot. This process was repeated until a hard or soft tissue injury was induced on the joint. Injuries were assessed by an orthopaedic surgeon, and ligament strain was recorded by implanted strain gauges. Results: The mechanical impact simulator induced ACL injuries in 87% of specimens, with medial collateral ligament (MCL) injuries in 31%. ACL tear locations were 71% femoral side, 21% midsubstance, and 9% tibial side. Peak strain before failure for ACL-injured specimens was 15.3% ± 8.7% for the ACL and 5.1% ± 5.6% for the MCL ( P < .001). Conclusion: The ACL injuries induced by the mechanical impact simulator in the present study have provided clinically relevant in vitro representations of in vivo ACL injury patterns as cited in the literature. Additionally, current ligament strains corroborate the literature to support disproportionate loading of the ACL relative to the MCL during athletic tasks. Clinical Relevance: These findings indicate that the mechanical impact simulator is an appropriate model for examining independent mechanical variables, treatment techniques, and preventive interventions during athletic tasks leading up to and including an ACL injury. Accordingly, this system can be utilized to further parse out contributing factors to an ACL injury as well as assess the shortcomings of ACL reconstruction techniques in a dynamic, simulated environment that is better representative of in vivo injury scenarios.

Background: Female patients sustain noncontact knee ligament injuries at a greater rate compared with their male counterparts. The cause of these differences in the injury rate and the movements that load the ligaments until failure are still under dispute in the literature. Purpose/Hypotheses: This study was designed to determine differences in anterior cruciate ligament (ACL) and medial collateral ligament (MCL) strains between male and female cadaveric specimens during a simulated athletic task. The primary hypothesis tested was that female limbs would demonstrate significantly greater ACL strain compared with male limbs under similar loading conditions. A secondary hypothesis was that MCL strain would not differ between sexes. Study Design: Controlled laboratory study. Methods: Motion analysis of 67 athletes performing a drop vertical jump was conducted. Kinetic data were used to categorize injury risk according to tertiles, and these values were input into a cadaveric impact simulator to assess ligamentous strain during a simulated landing task. Uniaxial and multiaxial load cells and differential variable reluctance transducer strain sensors were utilized to collect mechanical data for analysis. Conditions of external loads applied to the cadaveric limbs (knee abduction moment, anterior tibial shear, and internal tibial rotation) were varied and randomized. Data were analyzed using 1-way analysis of variance (ANOVA), 2-way repeated-measures ANOVA, and the Fisher exact test. Results: There were no significant differences ( P = .184) in maximum ACL strain between male (13.2% ± 8.1%) and female (16.7% ± 8.3%) specimens. Two-way ANOVA demonstrated that across all controlled external load conditions, female specimens consistently attained at least 3.5% increased maximum ACL strain compared with male specimens ( F 1,100 = 4.188, P = .043); however, when normalized to initial contact, no significant difference was found. There were no significant differences in MCL strain between sexes for similar parameters. Conclusion: When compared with baseline, female specimens exhibited greater values of ACL strain at maximum, initial contact, and after impact (33, 66, and 100 milliseconds, respectively) than male specimens during similar loading conditions, with a maximum strain difference of at least 3.5%. During these same loading conditions, there were no differences in MCL loading between sexes, and only a minimal increase of MCL loading occurred during the impact forces. Our results indicate that female patients are at an increased risk for ACL strain across all similar conditions compared with male patients. Clinical Relevance: These data demonstrate that female specimens, when loaded similarly to male specimens, experience additional strain on the ACL. As the mechanical environment was similar for both sexes with these simulations, the greater ACL strain of female specimens must be attributed to ligament biology, anatomic differences, or muscular stiffness.

Background: Limb asymmetries, as determined through in vivo biomechanical measures, are known risk factors for anterior cruciate ligament (ACL) injury. Previous cadaveric studies have shown a lack of significant differences in ligament strain between contralateral lower extremities when identical kinematics were simulated on specimens. Recent methodological developments have applied in vivo knee kinetics to exert landing forces on cadaveric lower extremities to mimic ACL injury events, but it is unknown whether contralateral limbs fail in a consistent manner during impact simulator testing. Hypothesis: It was hypothesized that contralateral lower extremities would not exhibit side-to-side differences in ligament strains. Furthermore, it was hypothesized that failure loads and failure locations would be independent of limb dominance. Study Design: Controlled laboratory study. Methods: Fourteen pairs of cadaveric lower extremities were obtained from an anatomic donations program (8 female, 6 male; mean ± SD: age, 41.7 ± 8.1 years; mass, 86.8 ± 27.0 kg; body mass index, 29.4 ± 9.0 kg/m 2 ). A mechanical impact simulator was used to re-create the impulse ground-reaction force generated during an in vivo landing task. Ligament strains were recorded by differential variable force transducers implanted on the ACL and medial collateral ligament (MCL). Results: No significant differences were observed in peak ACL or peak MCL strain for 5 loading conditions. Fisher exact tests of independence revealed that limb dominance was independent of both load at failure and failure location. Conclusion: There were no significant differences in ACL and MCL strain values between limb sides during in vitro impact simulation testing. This finding indicates that limb dominance does not influence the failure threshold of the ACL, since there was no significant difference in failure strains. The functional mechanics of the ACL are comparable between contralateral pairs from the same healthy specimen. Clinical Relevance: Injury mechanisms and intra-articular mechanics cannot be ethically studied in an in vivo setting. The current study provides additional insight into limb asymmetry that is observed among athletes in clinical sports medicine settings.

Background: Females are at an increased risk of sustaining noncontact knee ligament injuries as compared with their male counterparts. The kinetics that load the anterior cruciate ligament (ACL) are still under dispute in the literature. Purpose/Hypothesis: The purpose of this study was to determine whether there are differences in knee kinetics between the sexes that lead to greater ACL strain in females when similar external loads are applied during a simulated drop vertical jump landing task. It was hypothesized that female limbs would demonstrate significant differences in knee abduction moment that predispose females to ACL injury when compared with males. Study Design: Controlled laboratory study. Methods: Motion analysis data of 67 athletes who performed a drop vertical jump were collected. The kinematic and kinetic data were used to categorize tertiles of relative risk, and these values were input into a cadaveric impact simulator to assess ligamentous loads during the simulated landing task. Uni- and multiaxial load cells and differential variable reluctance transducer strain sensors were utilized to collect kinetic data and maximum ACL strain for analysis. Conditions of external loads applied to the cadaveric limbs were systematically varied and randomized. Data were analyzed with 2-way repeated-measures analysis of variance and the Fisher exact test. Results: Five kinetic parameters were evaluated. Of the 5 kinetic variables, only knee abduction moment (KAM) demonstrated significant differences in females as compared with males ( F 1,136 = 4.398, P = .038). When normalized to height and weight, this difference between males and females increased in significance ( F 1,136 = 7.155, P = .008). Compared with males, females exhibited a 10.3-N·m increased knee abduction torque at 66 milliseconds postimpact and a 22.3-N·m increased abduction torque at 100 milliseconds postimpact. For loading condition, the condition of “maximum ACL strain” demonstrated a maximum difference of 54.3-N·m increased abduction torque and 74.5-N·m increased abduction torque at 66 milliseconds postimpact. Conclusion: Under the tested conditions, increased external loads led to increased medial knee translation force, knee abduction moment, and external knee moment. Females exhibited greater forces and moments at the knee, especially at KAM, when loaded in similar conditions. As these KAM loads are associated with increased load and strain on the ACL, the sex-based differences observed in the present study may account for a portion of the underlying mechanics that predispose females to ACL injury as compared with males in a controlled simulated athletic task. Clinical Relevance: KAM increases strain to the ACL under clinically representative loading. Additionally, this work establishes the biomechanical characteristics of knee loading between sexes.