Zhao, Kristin D.

Accurate quantification of subtle wrist motion changes resulting from ligament injuries is crucial for diagnosis and prescription of the most effective interventions for preventing progression to osteoarthritis. Current imaging techniques are unable to detect injuries reliably and are static in nature, thereby capturing bone position information rather than motion which is indicative of ligament injury. A recently developed technique, 4D (three dimensions + time) computed tomography (CT) enables three-dimensional volume sequences to be obtained during wrist motion. The next step in successful clinical implementation of the tool is quantification and validation of imaging biomarkers obtained from the four-dimensional computed tomography (4DCT) image sequences. Measures of bone motion and joint proximities are obtained by: segmenting bone volumes in each frame of the dynamic sequence, registering their positions relative to a known static posture, and generating surface polygonal meshes from which minimum distance (proximity) measures can be quantified. Method accuracy was assessed during in vitro simulated wrist movement by comparing a fiducial bead-based determination of bone orientation to a bone-based approach. The reported errors for the 4DCT technique were: 0.00–0.68 deg in rotation; 0.02–0.30 mm in translation. Results are on the order of the reported accuracy of other image-based kinematic techniques.

Dynamic loading on articular joints is essential for the evaluation of the risk of the articulation degeneration associated with occupational activities. In the current study, we analyzed the dynamic constraint loading for the thumb during pipetting. The constraint loading is considered as the loading that has to be carried by the connective tissues of the joints (i.e., the cartilage layer and the ligaments) to maintain the kinematic constraints of the system. The joint loadings are solved using a classic free-body approach, using the external loading and muscle forces, which were obtained in an inverse dynamic approach combined with an optimization procedure in anybody. The constraint forces in the thumb joint obtained in the current study are compared with those obtained in the pinch and grasp tests in a previous study (Cooney and Chao, 1977, “Biomechanical Analysis of Static Forces in the Thumb During Hand Function,” J. Bone Joint Surg. Am., 59(1), pp. 27–36). The maximal compression force during pipetting is approximately 83% and 60% greater than those obtained in the tip pinch and key pinch, respectively, while substantially smaller than that obtained during grasping. The maximal lateral shear force is approximately six times, 32 times, and 90% greater than those obtained in the tip pinch, key pinch, and grasp, respectively. The maximal dorsal shear force during pipetting is approximately 3.2 and 1.4 times greater than those obtained in the tip pinch and key pinch, respectively, while substantially smaller than that obtained during grasping. Our analysis indicated that the thumb joints are subjected to repetitive, intensive loading during pipetting, compared to other daily activities.

Shoulder pain and pathology are common in manual wheelchair (MWC) users with paraplegia, and the biomechanical mechanism of injury is largely unknown. Establishing patterns of MRI characteristics in MWC users would help advance understanding of the mechanical etiology of rotator cuff disease, thus improving the logic for prescribed interventions. The purpose of this study was to report detailed shoulder MRI findings in a sample of 10 MWC users with anterolateral shoulder pain. The imaging assessments were performed using our standardized MRI Assessment of the Shoulder (MAS) guide. The tendon most commonly torn was the supraspinatus at the insertion site in the anterior portion in either the intrasubstance or articular region. Additionally, widespread tendinopathy, CA ligament thickening, subacromial bursitis, labral tears, and AC joint degenerative arthrosis and edema were common. Further reporting of detailed shoulder imaging findings is needed to confirm patterns of tears in MWC users regarding probable tendon tear zone, region, and portion. This investigation was a small sample observational study and did not yield data that can define patterns of pathology. However, synthesis of detailed findings from multiple studies could define patterns of pathological MRI findings allowing for associations of imaging findings to risk factors including specific activities.

Purpose The purpose of this in vitro biomechanical study was to assess the effects of the remplissage procedure for small‐ and large‐sized Hill‐Sachs lesions (HSLs) on shoulder range of motion (ROM) with a special interest in the apprehension position. Methods HSLs of 50% and 100% of the glenoid width were simulated in 7 cadaveric shoulders as small and large lesions, respectively, and the postoperative condition was reproduced by placing suture anchors on the articular surface and tying down the infraspinatus at the medial edge of the would‐be lesion site. ROMs were measured in abduction, internal rotation, and external rotation with the humerus in the adducted and abducted position. In addition, the ROM was measured in the anterior apprehension position, in which 2 torques of external rotation and extension were applied simultaneously, and external rotation and horizontal extension ROMs were measured with the humerus in different abduction angles (20°, 40°, and 60°). Results For standard ROMs, the procedure for the 50% HSL maintained complete ROMs, whereas the procedure for the 100% HSL significantly decreased external rotation ROM with the humerus in both the adducted and abducted positions, as well as abduction ROM. In the apprehension position, remplissage for the 50% HSL decreased extension ROM with the humerus abducted to 40° and 60°. Remplissage for the 100% HSL significantly decreased both external and extension ROMs regardless of the humeral abduction angle. Conclusions In the cadaveric model with an intact humeral head and the simulated postoperative condition, the remplissage procedure for a large HSL caused significant restrictions in ROM of abduction in the scapular plane and external rotation with the humerus in both adduction and abduction. It also caused significant restrictions in both external rotation and extension ROMs in the apprehension position. Clinical Relevance The indication for the remplissage procedure for the larger HSL should be considered carefully, especially for the competitive throwing athlete who needs exceptional external rotation ROM for optimal overhead throwing performance.

The supraspinatus tendon consists morphologically of two sub‐regions, anterior and posterior. The anterior sub‐region is thick and tubular while the posterior is thin and strap‐like. The purpose of this study was to compare the structural and mechanical properties of the anterior and posterior sub‐regions of the supraspinatus tendon. The supraspinatus tendons from seven human cadaveric shoulders were morphologically divided into the anterior and posterior sub‐regions. Length, width, and thickness were measured. A servo‐hydraulic testing machine (MTS Systems Corporation, Minneapolis, MN) was used for tensile testing. The maximal load at failure, modulus of elasticity and ultimate tendon stress were calculated. Repeated measures were used for statistical comparisons. The mean anterior tendon cross‐sectional area was 47.3 mm2 and the posterior was 32.1 mm2. Failure occurred most often at the insertion site: anterior (5/7) and posterior (6/7). All parameters of the anterior sub‐region were significantly greater than those of the posterior sub‐region. The moduli of elasticity at the insertion site were 592.4 MPa in the anterior sub‐region and 217.7 MPa in the posterior (P = 0.01). The ultimate failure loads were 779.2 N in the anterior sub‐region and 335.6 N in the posterior (P = 0.003). The ultimate stresses were 22.1 MPa in the anterior sub‐region and 11.6 MPa in the posterior (P = 0.008). We recognized that the anterior and posterior sub‐regions of the SSP tendon have significantly different mechanical properties. In a future study, we need to evaluate how best to repair an SSP tendon considering these region‐specific properties. Clin. Anat. 27:702–706, 2014. © 2013 Wiley Periodicals, Inc.

We undertook this study to determine the minimum amount of coronoid necessary to stabilise an otherwise intact elbow joint. Regan–Morrey types II and III, plus medial and lateral oblique coronoid fractures, collectively termed type IV fractures, were simulated in nine fresh cadavers. An electromagnetic tracking system defined the three-dimensional stability of the ulna relative to the humerus. The coronoid surface area accounts for 59% of the anterior articulation. Alteration in valgus, internal and external rotation occurred only with a type III coronoid fracture, accounting for 68% of the coronoid and 40% of the entire articular surface. A type II fracture removed 42% of the coronoid articulation and 25% of the entire articular surface but was associated with valgus and external rotational changes only when the radial head was removed, thereby removing 67% of the articular surface. We conclude that all type III fractures, as defined here, are unstable, even with intact ligaments and a radial head. However, a type II deficiency is stable unless the radial head is removed. Our study suggests that isolated medial-oblique or lateral-oblique fractures, and even a type II fracture with intact ligaments and a functional radial head, can be clinically stable, which is consistent with clinical observation.

Background Tightness of the posteroinferior capsule is assumed to be the cause of internal rotation loss in baseball pitchers. Although the relationship between posterior capsule and subacromial impingement has been recognized, this relationship during the baseball-pitching motion is unclear. Hypothesis Contact pressure during baseball-pitching motion increases with posterior capsule tightness. Study Design Controlled laboratory study. Methods Eight fresh-frozen shoulders were used. The peak contact pressure and area on the coracoacromial arch were measured on a custom-designed shoulder experimental device capable of 6 degrees of freedom motion. Simultaneously, the sites of peak pressure on the coracoacromial arch and humerus were observed from various angles. The posteroinferior capsule tightness was simulated by plicating the capsule in the region from 6 to 8 o'clock. The static testing positions correlated to the early cocking, late cocking, acceleration, deceleration, and follow-through phases of the pitching motion. Results The peak contact pressure during the follow-through phase (0.63 ± 0.50 MPa) significantly increased with posteroinferior capsule tightness (1.00 ± 0.65 MPa) (P = .014). Additionally, the contact area on the coracoacromial ligament during the follow-through phase (0.98 ± 0.67 cm2) significantly increased with posteroinferior capsule tightness (1.47 ± 0.91 cm 2) (P < .001). The site of the peak contact pressure did not change between the 2 conditions. Conclusion Our findings demonstrate that posteroinferior capsule tightness leads to higher contact pressure under the subacromial arch and increased contact area, particularly on the coracoacromial ligament during the follow-through phase. Clinical Relevance This tightness may affect risk of injury of the rotator cuff and its surrounding tissues by increasing subacromial contact during pitching.

Background Although the use of rotator interval closure is frequently advocated as a useful supplement to shoulder instability repairs, the addition of a rotator interval closure after arthroscopic instability repair has not been fully investigated. Purpose The objective of this study was to investigate whether a rotator interval closure improves glenohumeral stability in an anterior and posterior instability shoulder model. Study Design Controlled laboratory study. Methods Fourteen fresh-frozen cadaveric shoulder specimens were dissected free of soft tissues, leaving the rotator cuff intact with simulated cuff loading. All specimens were mounted in a custom testing apparatus using infrared sensors to document glenohumeral translation and rotation. The specimens were then tested for stability in the following order: vented/subluxated state, after arthroscopic anterior (Group 1; 7 specimens) or posterior (Group 2; 7 specimens) instability repair with suture anchors, and then after rotator interval closure. For each of the 3 testing conditions, the following were measured: (1) external and internal rotation at neutral, (2) external and internal rotation at 90° of abduction, (3) posterior and anterior translation at neutral rotation (15 N and 25 N), (4) anterior translation at 90° of abduction and external rotation (Group 1; 15 N and 25 N), (5) posterior translation at 90° of flexion and internal rotation (Group 2; 15 N and 25 N), and (6) sulcus testing in neutral (7.5 N). Results Posterior stability was only improved after anchor capsulolabral repair (8.0 to 5.0 mm; P = .017, 25 N), but there was no improvement after rotator interval closure (5.0 to 4.6 mm; P = .453). However, anterior stability was improved after capsulolabral repair (8.6 to 4.0 mm; P = .016, 25 N) and also improved further by rotator interval closure (4.0 to 2.4 mm; P = .007). The mean loss of external rotation was significantly increased by the addition of the rotator interval closure in both neutral and abducted glenohumeral positions, with a mean external rotation loss of 28° in neutral ( P = .013). The addition of a rotator interval closure did not improve sulcus stability ( P = .4). Conclusion The addition of an arthroscopic rotator interval closure after posterior capsulolabral repair did not improve posterior stability; however, anterior stability was improved further after a rotator interval closure. Inferior stability was not improved. Arthroscopic rotator interval closure significantly decreased external rotation at both neutral and abducted arm positions. Clinical Relevance Arthroscopic closure may be beneficial in certain cases of anterior shoulder instability; however, posterior instability was not improved. Predictable losses of external rotation after rotator interval closure are of concern.

The measurement of intradiscal stress has been primarily limited to nucleus pulposus pressure. Intradiscal stress profilometry is a technique that measures stress in both the nucleus pulposus (hydrostatic) and annulus fibrosus (compression). Evidence from animal studies suggests that distraction may affect disc physiology and promote repair. A study was performed to determine the reliability of intradiscal stress profilometry measurements in the anterior, posterior, and nucleus regions of cadaveric lumbar discs. Four fresh-frozen human lumbar motion segments were prepared and tested. Five profiles were obtained during two conditions of compression and three conditions of distraction. Discs were then graded for degenerative change. Reliability was judged by within-specimen coefficients of variation. The coefficients of variation were smaller (more reliable) for compression conditions than for distraction conditions. Within-specimen coefficients during compression ranged from 1.58% to 37.2% in the nucleus, 3.9% to 67.4% in the anterior annulus, and 2.3% to 25.5% in the posterior annulus. The reliability of intradiscal stress profilometry is acceptable for repeated measures studies evaluating within-specimen changes, but the sample size will vary depending on the test conditions used and the disc region of interest.

Purpose The purposes of this study were to investigate the differences between open and arthroscopic closure of the rotator interval (RI) on glenohumeral translation and range of motion. We also sought to determine if the addition of either an open or arthroscopic RI closure increases stability of the shoulder. Methods Fourteen fresh‐frozen (10 paired) cadaveric shoulder specimens were mounted in a custom testing apparatus, and glenohumeral translation and rotation were obtained by using an optoelectric tracking system (Optotrak Certus; Northern Digital, Ontario, Canada). Specimens were randomly allocated to either open (n = 7) or arthroscopic (n = 7) plication of the RI. The following were measured first with an intact and vented specimen and subsequently after an RI closure using either open or arthroscopic techniques: (1) range of motion in neutral and 90° abduction; (2) anterior and posterior translation at neutral rotation; (3) anterior translation at 90° abduction with external rotation; and (4) posterior translation at 90° flexion with internal rotation. Results Posterior stability was not improved from the intact state by either open (1.0‐mm change) or arthroscopic (0.1‐mm change) repair. The sulcus stability was improved in the open group (5.7 mm to 2.9 mm, P = .028), but not arthroscopically (5.1 to 4.1 mm, P = .499). Neutral anterior stability was improved after open repair (7.2 to 2.6 mm, P = .018), but not arthroscopically (2.3 to 2.4 mm, P = 0.5). However, anterior stability in external rotation (ER) at 90° abduction was improved in the arthroscopic repair group (5.5 to 3.1 mm, P = .006). The mean loss of ER in neutral was greater in the open group (40.8°) versus the arthroscopic group (24.4°, P = .0038). The arthroscopic group showed an 11.7° loss of ER in 90° abduction ( P = .018) versus the open group loss of 4.8°. There were no significant differences in loss of IR in either neutral or 90° abduction. Conclusions Posterior stability was not improved by either open or arthroscopic rotator interval repair, and sulcus stability only improved with the open technique. Anterior stability in neutral was improved after open repair and in the arthroscopic repair group with the arm abducted. There was a large loss of external rotation with both techniques. Clinical Relevance This study suggests that arthroscopic RI closure adds little to the overall posterior and inferior stability of the shoulder joint, although anterior stability may be improved. There is a potentially large loss of external rotation after either repair method.