Hall, Leslie

ABSTRACT The PLEX-ID system is a novel technology that couples PCR amplification and electrospray ionization-mass spectrometry to identify pathogens directly in clinical specimens. The analytical performance of the PLEX-ID Broad Fungal assay was compared with that of traditional culture identification by using 91 characterized fungal culture isolates (64 manufacturer-claimed and 27 nonclaimed organisms) and directly by using 395 respiratory specimens. Discordant results were resolved by D2 large-subunit ribosomal DNA fungal sequencing. Environmental studies were performed to monitor for potential contamination. The PLEX-ID Broad Fungal assay correctly identified 95.6% (87/91) and 81.3% (74/91) of the culture isolates to the genus and species levels, respectively. Of the manufacturer-claimed organisms, 100% (64/64) and 92.2% (59/64) were correctly identified to the genus and species levels, respectively. Direct analysis of respiratory specimens resulted in 67.6% (267/395) and 66.6% (263/395) agreement with culture results to the genus and species levels, respectively, with 16.2% (64/395) of the results discordant with culture and 16.2% (64/395) not detected by the system. The majority (>95%) of the isolates not detected directly by the PLEX-ID system ultimately grew in low quantities in culture (≤20 colonies). In 20.3% (35/172) of the respiratory specimens where no growth was observed in culture, the PLEX-ID system identified a fungus, suggesting a potential increase in sensitivity over culture in some instances. The PLEX-ID system provides a rapid method for the detection of a broad array of fungi directly in respiratory specimens and has the potential of impacting turnaround times and patient care by reducing the need to wait for the growth of an organism in culture.

ABSTRACT The Sensititre MycoTB plate (TREK Diagnostic Systems, Cleveland, OH) uses a microtiter plate MIC format for susceptibility testing of Mycobacterium tuberculosis complex isolates against first- and second-line antituberculosis agents. Categorical agreement versus the agar proportion method for 122 M. tuberculosis complex isolates was 94% to 100%.

ABSTRACT An on-plate testing method using formic acid was evaluated on the Bruker Biotyper matrix-assisted laser desorption ionization–time of flight (MALDI-TOF) mass spectrometry system using 90 yeast and 78 Corynebacterium species isolates, and 95.6 and 81.1% of yeast and 96.1 and 92.3% of Corynebacterium isolates were correctly identified to the genus and species levels, respectively. The on-plate method using formic acid yielded identification percentages similar to those for the conventional but more laborious tube-based extraction.

ABSTRACT The Yeast Traffic Light PNA FISH kit (YTL) correctly identified Candida spp. in 207/216 (96%) positive blood cultures. Discordant results were seen with known cross-reacting species and cultures containing Candida lambica and Rhodotorula mucilaginosa . The YTL provides rapid, reliable identification of the five common Candida species found in blood cultures.

ABSTRACT The performance of the Bruker Biotyper matrix-assisted laser desorption ionization–time of flight (MALDI-TOF) mass spectrometer (MS) for the identification of dermatophytes from clinical cultures was compared to that of dermatophyte identification using 28S rRNA gene sequencing. The MALDI Biotyper library (MBL; version 3.0) was used alone and in combination with a supplemented library containing an additional 20 dermatophyte spectra (S-MBL). Acquired spectra were interpreted using both the manufacturer-recommended scores (genus, ≥1.7; species, ≥2.0) and adjusted cutoff values established by this study (genus, ≥1.5; species, ≥1.7); identifications required a minimum 10% difference in scores between the top two different organisms to be considered correct. One hundred well-characterized, archived dermatophyte isolates and 71 fresh dermatophyte cultures were evaluated using both libraries and both sets of cutoff criteria. Collectively, the S-MBL significantly outperformed the MBL at both the genus (93% versus 37.4%; P < 0,0001) and species (59.6% versus 20.5%; P < 0.0001) levels when using the adjusted score criteria. Importantly, application of the lowered cutoff values significantly improved genus ( P = 0.005)- and species ( P < 0.0001)-level identification for the S-MBL, without leading to an increase in misidentifications. MALDI-TOF MS is a cost-effective and rapid alternative to traditional or molecular methods for dermatophyte identification, provided that the reference library is supplemented to sufficiently encompass clinically relevant, intraspecies strain diversity.

ABSTRACT Blastomyces dermatitidis and Histoplasma capsulatum are dimorphic fungi that often cause self-limited respiratory infections. However, they may also cause severe disseminated disease, depending on the level of the exposure to the organism and the host immune status. In addition, patients with infections caused by these fungi may have very similar clinical presentations. Although microbiologic culture is a standard method for detecting these pathogens, their recovery may require days to weeks, and the manipulation of cultures presents a significant safety hazard to laboratory personnel. Therefore, the goal of this study was to design a rapid, real-time PCR assay to detect and differentiate B. dermatitidis and H. capsulatum from culture isolates and directly from clinical specimens. Primers and fluorescence resonance energy transfer hybridization probes were designed to target the histidine kinase and glyceraldehyde-3-phosphate dehydrogenase genes of B. dermatitidis and H. capsulatum , respectively. The analytical sensitivity of the assay was determined to be 100 copies/μl for both fungi. From culture isolates, the assay demonstrated 100% specificity and 100% sensitivity for B. dermatitidis and 100% specificity and 94% sensitivity for H. capsulatum . Detection directly from 797 clinical specimens demonstrated specificities and sensitivities of 99% and 86% for B. dermatitidis and 100% and 73% for H. capsulatum compared with the results for culture. This real-time PCR assay provides a rapid method for the detection of B. dermatitidis and H. capsulatum from culture isolates and directly from clinical specimens.

ABSTRACT Matrix-assisted laser desorption ionization–time of flight (MALDI-TOF) mass spectrometry was compared to phenotypic testing for yeast identification. MALDI-TOF mass spectrometry yielded 96.3% and 84.5% accurate species level identifications (spectral scores, ≥1.8) for 138 common and 103 archived strains of yeast. MALDI-TOF mass spectrometry is accurate, rapid (5.1 min of hands-on time/identification), and cost-effective ($0.50/sample) for yeast identification in the clinical laboratory.

ABSTRACT The SLOMYCO Sensititre panel and the custom JustOne strip (both from TREK Diagnostic Systems, Cleveland, OH) were evaluated for susceptibility testing of Mycobacterium avium complex isolates against clarithromycin. Seventy-one archived and prospectively collected isolates were tested using both the SLOMYCO panel and the JustOne strip, and the results were compared to those obtained using the BACTEC 460 (BD, Sparks, MD) radiometric method and a broth microdilution reference method. Results obtained by the SLOMYCO panel and the JustOne strip agreed with the BACTEC 460 method for 64/71 isolates (90%). Similarly, concordance with the broth microdilution method was 40/43 isolates (93%) for both test systems. The effect of the source medium on inoculum preparation was evaluated, and there were no differences noted in MICs, regardless of whether the inoculum was prepared from isolates grown in Middlebrook 7H9 medium, on Middlebrook 7H10 agar, or in VersaTREK broth culture bottles (Trek Diagnostics). Clarithromycin susceptibility testing of MAC using the SLOMYCO panel and the JustOne strip methods is easy to set up and simple to read and is readily incorporate into the clinical laboratory. These systems offer advantages over the BACTEC 460 system including the lack of a need for radioactive substrates, sharps, or costly instrumentation.

ABSTRACTThe sulfonamides were the first drugs with antituberculous effects. Their use was abandoned and basically forgotten with the advent of streptomycin and isoniazid combination treatment. There is a widespread belief, apparently based on testing a single isolate on questionable media, thatMycobacterium tuberculosisis resistant to trimethoprim-sulfamethoxazole (TMP-SMX). We saw a complex immunocompromised patient with tuberculosis who was initially treated with TMP-SMX without antituberculous drugs and defervesced on this treatment. An isolate ofM. tuberculosisfrom this patient was found to be sensitive to TMP-SMX. We examined how frequentlyM. tuberculosisis sensitive to TMP-SMX. Isolates were tested for susceptibility to TMP-SMX on supplemented Middlebrook 7H10 plates. We found that 43 of 44 (98%) isolates ofM. tuberculosiswere susceptible to the combination of ≤1 μg/ml of TMP and 19 μg/ml of SMX (≤1/19 μg/ml). Thus, the vast majority of ourM. tuberculosisisolates were susceptible to TMP-SMX at an MIC similar to that forMycobacterium kansasii,Mycobacterium marinum, and sensitive rapidly growing mycobacteria, organisms successfully treated with TMP-SMX as part of the treatment regimen. It is possible that TMP-SMX may be useful in treating patients with multiple-drug-resistant and extended drug-resistant tuberculosis. We feel that a clinical trial looking at the effectiveness of TMP-SMX as an antituberculous drug is worthwhile.

ABSTRACT The performance of the new VITEK 2 Advanced Colorimetry yeast identification (YST) card for use with the VITEK 2 system (bioMérieux, Inc., Hazelwood, MO) was compared to that of the API 20C AUX (API) system (bioMérieux SA, Marcy-l'Etoile, France) in a multicenter evaluation. A total of 12 quality control, 64 challenge, and 623 clinical yeast isolates were used in the study. Comparisons of species identification, platform reliability, and substrate reproducibility were made between YST and API, with API considered the reference standard. Quality control testing to assess system and substrate reproducibility matched expected results ≥95% of the time. The YST card correctly identified 100% of the challenge strains, which covered the species range of the manufacturer's performance claims. Using clinical isolates, the YST card correctly identified 98.5%, with 1.0% of isolates incorrectly identified and 0.5% unidentified. Among clinical isolates, the YST card generated fewer low-discrimination results (18.9%) than did API (30.0%). The time to identification with YST was 18 h, compared to 48 to 72 h with API. The colorimetric YST card used with the VITEK 2 provides a highly automated, objective yeast identification method with excellent performance and reproducibility. We found this system useful for timely and accurate identification of significant yeast species in the clinical microbiology laboratory.