Gwon, Kihak

ABSTRACT Encapsulation of human pluripotent stem cells (hPSC) has high relevance for biomedical applications ranging from tissue engineering to drug screening and cellular therapies. Microcapsules serve a multitude of purposes—from promoting hPSC organization into spheroids to enabling scalable differentiation in vitro and providing immunoisolation in vivo. While multiple encapsulation strategies have been reported, there is typically a tradeoff between the structural complexity of capsules and throughput of their generation. Our paper describes a novel 3D printed microfluidic encapsulation device for fabricating structurally complex microcapsules with a hydrogel shell and aqueous core at rates of up to 1825 Hz. The use of 3D printing allowed to dramatically decrease device footprint when compared to standard soft lithography‐based microfluidic encapsulation devices. Leveraging decreased footprint and the ability to arrange fluidic networks in a 3D space, we fabricated a 10‐nozzle microencapsulation device that generated microcapsules at a rate 10‐times that of the single‐nozzle device. The novel microfluidic device was used to encapsulate hPSCs, human embryonic stem cells (hESCs), and induced pluripotent stem cells (iPSCs). Hydrogel microcapsules with aqueous core promoted hPSCs aggregation into spheroids or embryoid bodies, which maintained high levels of pluripotency. Our technology enables safe and effective encapsulation of hPSCs on a scale (billions of cells) required to treat patients.

Abstract Vaccine‐induced immune thrombotic thrombocytopenia (VITT) is a new disorder that emerged in the wake of coronavirus disease 2019 (COVID‐19) vaccination. It is a rare but life‐threatening condition that requires an aggressive course of treatment to improve patient outcomes. Currently, the diagnosis of VITT relies on a comprehensive panel of criteria, including a history of recent vaccination, platelet count, positive enzyme linked immunosorbent assays (ELISA) result for a closely related thrombotic disorder, heparin‐induced thrombocytopenia (HIT), and platelet factor 4 (PF4)‐dependent functional assays. The study describes a technically simple antigenic assay designed to detect autoimmune antibodies associated with VITT. It is first shown that cross‐linked platelet factor 4 (c‐PF4) represents an antigenic target specific for VITT/VITT‐like Abs. This antigenic target is then incorporated into a microfluidic electrochemical biosensor and specific and sensitive detection of VITT/VITT‐like antibodies is demonstrated in a fully automated manner while using microliter volumes of patient sera. Fifty‐five serum samples are tested using the microfluidic electrochemical biosensor and demonstrated high accuracy for the detection of VITT sera and VITT‐like monoclonal gammopathy of thrombotic ignificance (MGTS) antibodies compared to healthy controls and HIT patients. It is envisioned that the microfluidic electrochemical biosensor will be used in combination with other clinical criteria to enable timely, sensitive, and specific diagnosis of VITT.

This review describes approaches for encapsulation of pluripotent stem cells, the biomaterials used, strategies for differentiation into hepatocytes and β cells, and the impact of microencapsulation on cellular therapy.

The Fusarium fungi is found in cereals and feedstuffs and may produce mycotoxins, which are secondary metabolites, such as the T-2 toxin (T-2). In this work, we explored the hepatotoxicity of T-2 using microfluidic 3D hepatic cultures. The objectives were: (i) exploring the benefits of microfluidic 3D cultures compared to conventional 3D cultures available commercially (Aggrewell plates), (ii) establishing 3D co-cultures of hepatic cells (HepG2) and stellate cells (LX2) and assessing T-2 exposure in this model, (iii) characterizing the induction of metabolizing enzymes, and (iv) evaluating inflammatory markers upon T-2 exposure in microfluidic hepatic cultures. Our results demonstrated that, in comparison to commercial (large-volume) 3D cultures, spheroids formed faster and were more functional in microfluidic devices. The viability and hepatic function decreased with increasing T-2 concentrations in both monoculture and co-cultures. The RT-PCR analysis revealed that exposure to T-2 upregulates the expression of multiple Phase I and Phase II hepatic enzymes. In addition, several pro- and anti-inflammatory proteins were increased in co-cultures after exposure to T-2.

This study investigated the influence of hypoxic culture conditions on human nasal inferior turbinate-derived stem cells (hNTSCs), a subtype of mesenchymal stem cells (MSCs). It aimed to discern how hypoxia affected hNTSC characteristics, proliferation, and differentiation potential compared to hNTSCs cultured under normal oxygen levels. After obtaining hNTSCs from five patients, the samples were divided into hypoxic and normoxic groups. The investigation utilized fluorescence-activated cell sorting (FACS) for surface marker analysis, cell counting kit-8 assays for proliferation assessment, and multiplex immunoassays for cytokine secretion study. Differentiation potential—osteogenic, chondrogenic, and adipogenic—was evaluated via histological examination and gene expression analysis. Results indicated that hNTSCs under hypoxic conditions preserved their characteristic MSC phenotype, as confirmed by FACS analysis demonstrating the absence of hematopoietic markers and presence of MSC markers. Proliferation of hNTSCs remained unaffected by hypoxia. Cytokine expression showed similarity between hypoxic and normoxic groups throughout cultivation. Nevertheless, hypoxic conditions reduced the osteogenic and promoted adipogenic differentiation potential, while chondrogenic differentiation was relatively unchanged. These insights contribute to understanding hNTSC behavior in hypoxic environments, advancing the development of protocols for stem cell therapies and tissue engineering.

Human pluripotent stem cells (hPSCs) are capable of unlimited proliferation and can undergo differentiation to give rise to cells and tissues of the three primary germ layers. While directing lineage selection of hPSCs has been an active area of research, improving the efficiency of differentiation remains an important objective. In this study, we describe a two-compartment microfluidic device for co-cultivation of adult human hepatocytes and stem cells. Both cell types were cultured in a 3D or spheroid format. Adult hepatocytes remained highly functional in the microfluidic device over the course of 4 weeks and served as a source of instructive paracrine cues to drive hepatic differentiation of stem cells cultured in the neighboring compartment. The differentiation of stem cells was more pronounced in microfluidic co-cultures compared to a standard hepatic differentiation protocol. In addition to improving stem cell differentiation outcomes, the microfluidic co-culture system described here may be used for parsing signals and mechanisms controlling hepatic cell fate.

Abstract Background: The antibiotic resistance of pathogenic microbes due to the overuse of antibiotics is a growing threat to the public health and can eventually reduce the therapeutic effects of antibiotics. Hydrogel-based systems for local delivery of antibiotics can be a solution to this problem. Metal-organic frameworks (MOFs) have received considerable interest for use as antimicrobial materials due to their high porosity, large surface area to volume, diverse structures, and tunable topologies. Methods: In this study, we developed MOF-encapsulated and dual (photo & chemical)-crosslinkable alginate hydrogel as an antimicrobial scaffold. We synthesized antimicrobial Cu(AZPY)-MOF using solvothermal reaction and encapsulated them in an alginate-based hydrogel via visible light photo-crosslinking and calcium ion-induced chemical-crosslinking processes. Results: Powder X-ray diffraction, Fourier-transform infrared spectroscopy, thermogravimetric analysis, and scanning electron microscopy confirmed the successful fabrication of Cu(AZPY)-MOF encapsulated alginate hydrogel. The mechanical strength of the dual-crosslinked hydrogels was better than that of the photo-crosslinked hydrogel. Encapsulation of Cu(AZPY)-MOF in an alginate hydrogel resulted in a further increase in the mechanical strength of the hydrogel owing to the additional interaction of alginate with Cu-MOF. Moreover, the Cu(AZPY)-MOF encapsulated alginate hydrogel exhibited excellent antibacterial and antifungal properties against two bacterial strains (i.e., MRSA and S. mutans) and one fungal strain (C. albicans) as well as negligible cytotoxicity toward MEFs. Conclusions: The antimicrobial agents encapsulated dual-crosslinkable alginate hydrogel developed in this study is a promising candidate for use in tissue engineering and biomedical field.