Yaszemski, Michael J.

The objective of this study was to investigate the influence of pore geometry on the transport rate and depth after repetitive mechanical deformation of porous scaffolds for tissue engineering applications. Flexible cubic imaging phantoms with pores in the shape of a circular cylinder, elliptic cylinder, and spheroid were fabricated from a biodegradable polymer blend using a combined 3D printing and injection molding technique. The specimens were immersed in fluid and loaded with a solution of a radiopaque solute. The solute distribution was quantified by recording 20 μm pixel-resolution images in an X-ray microimaging scanner at selected time points after intervals of dynamic straining with a mean strain of 8.6 ± 1.6% at 1.0 Hz. The results show that application of cyclic strain significantly increases the rate and depth of solute transport, as compared to diffusive transport alone, for all pore shapes. In addition, pore shape, pore size, and the orientation of the pore cross-sectional asymmetry with respect to the direction of strain greatly influence solute transport. Thus, pore geometry can be tailored to increase transport rates and depths in cyclically deformed scaffolds, which is of utmost importance when thick, metabolically functional tissues are to be engineered.

Nerve tubes, guides, or conduits are a promising alternative for autologous nerve graft repair. The first biodegradable empty single lumen or hollow nerve tubes are currently available for clinical use and are being used mostly in the repair of small-diameter nerves with nerve defects of < 3 cm. These nerve tubes are made of different biomaterials using various fabrication techniques. As a result these tubes also differ in physical properties. In addition, several modifications to the common hollow nerve tube (for example, the addition of Schwann cells, growth factors, and internal frameworks) are being investigated that may increase the gap that can be bridged. This combination of chemical, physical, and biological factors has made the design of a nerve conduit into a complex process that demands close collaboration of bioengineers, neuroscientists, and peripheral nerve surgeons. In this article the authors discuss the different steps that are involved in the process of the design of an ideal nerve conduit for peripheral nerve repair.

Natural and synthetic hydrogels have attracted much attention for nerve regeneration. Previous studies have shown that electrical charge has significant effect on stimulation of neurite outgrowth. In this work, incorporation of a positively charged monomer into the photocrosslinkable oligo(polyethylene glycol) fumarate (OPF) hydrogel has been investigated. We have evaluated the effect of localized positive charge on neurite outgrowth in culture with an objective that positively charged hydrogels ultimately can be used for stimulating in vivo nerve regeneration. The effect of charged modification has been also studied on mechanical properties and swelling ratio of these hydrogels. Our data indicated that with increasing charge density hydrogels swelling ratio increased in water, however it remained constant in PBS. We also demonstrated that compressive modulus and tensile strength of the hydrogels improved with incorporation of electrical charge into the hydrogels. Biodegradation of modified hydrogels was investigated in a series of biomimetic solutions. OPF hydrogels appeared to be more susceptible to oxidative degradation as opposed to the hydrolytic degradation in enzymes and acidic solution, and the degradation rate was correlated to the PEG molecular weight and charge density of the hydrogels. To investigate the effect of charge modification on nerve cell attachment and differentiation, dissociated dorsal root ganglion (DRG) cells were plated onto the modified and unmodified hydrogels surfaces. DRG cells attached and extended their neurites more readily on the surface of positively charged hydrogels as opposed to the unmodified hydrogels.