Chao, Edmund Y.S.

The objective documentation of foot function before and after therapeutic intervention will be greatly enhanced by the utilization of devices capable of measuring dynamic foot pressure distribution. Efforts to develop this technology date back to the late 19th century, but only with recent advances in computers has it been possible to produce quantitatively accurate high resolution foot pressure distribution with high sampling rates and easily interpreted graphic displays. Over the years, a variety of methods have been employed to study foot pressure. Many of these techniques have already improved our understanding of the foot and its function, and have had an impact on the way we practice. Effective clinical utilization of these new investigative tools depends on an understanding of their scientific basis, capabilities and limitations.

Abstract Much of the clinical research in osteoporosis is directed toward documenting a reduction in vertebral fracture rate, but there is considerable disagreement about defining and quantifying vertebral fractures. We have evaluated the technique of digitizing landmarks identified on lateral radiographs of thoracic and lumbar vertebrae and computing vertebral body area. Reduction in area indicates that fractures occurred. Radiographs from 10 patients with osteoporosis and vertebral fractures were obtained from each of two centers, Henry Ford Hospital (HFH) and Mayo Clinic (MC), and vertebral area for each individual in the complete set of 20 radiographs was calculated at each center. Measurements at the two centers differed by a multiplicative constant related to the method of recording landmarks on the radiographs that was estimated using 300 x-rays from HFH. After adjusting the MC areas for this multiplicative relationship, the average ratio of the HFH areas to the transformed MC areas of individual vertebrae (T4-L5) ranged from 0.98 to 1.06. The correlation between HFH and transformed MC areas for individual vertebrae averaged 0.85, with slopes between 0.87 and 1.00, intercept average -0.57. Within-patient rank correlation averaged 0.97. We conclude that radiographic digitization is a reliable and reproducible method of determining vertebral body dimensions that is suitable for evaluating radiographs obtained at different clinical sites and for comparison with normal data. This technique should prove useful for documenting the presence of a vertebral fracture that may not be readily apparent on visual inspection of radiographs and for monitoring serial changes in vertebral body dimensions in long-term epidemiologic and therapeutic studies.

Abstract In a 4 year clinical trial in 202 postmenopausal osteoporotic women receiving NaF at 75 mg/day or placebo (both groups received supplementary calcium at 1500 mg/day), we found (N Engl J Med 322:801, 1990) that NaF increased bone mineral density in the lumbar spine (LS-BMD) substantially but did not decrease vertebral fracture rate (VFR), and it increased the nonvertebral fracture rate. Additional analyses and extended observations are now available on 50 women from the NaF group followed for up to 6 years of treatment. In these women, LS-BMD increased linearly over the 6 years (median rate, 8.7%/year or 0.063 g/cm2/year). Because during the 4 year trial the NaF dosage was decreased (because of side effects) in 54 of the 101 women randomized to NaF, dose-response relationships could be evaluated. For the entire study population, serum F level correlated directly with increase in LS-BMD (r = 0.61, P < 0.001). When individual person-years of observation were grouped by deciles of LS-BMD, VFR (per 100 person-years) decreased to a nadir of 24 as mean LS-BMD for the group increased from 0.6 to 1.2 g/cm2 and then doubled to 52 in the group with mean LS-BMD of 1.6 g/cm2. Multivariate analyses and inspection of three-dimensional plots revealed a complex pattern in which VFR was influenced by interaction of several variables. When the effects of LS-BMD, changes in LS-BMD, and serum F were assessed simultaneously, VFR was seen to decrease with increasing LS-BMD except when the higher LS-BMD was associated with rapid rate of increase in LS-BMD or a large increase from baseline serum F. For some patients (noncompliers or nonresponders), serum F or LS-BMD failed to increase. Thus, it is possible that lower dosages of NaF produce moderate decreases in VFR.

Since the electrogoniometric method has been justified for the measurement of lower extremity joint motion, a similar device is developed for the measurement of elbow joint and forearm rotations. In this design, the axis of forearm rotation coincides with the anatomical axis which eliminates the cross talk existing in the regular triaxial goniometer. Although the axis of abduction-adduction is still offset from the elbow joint, special linkage arrangement was used to obtain equivalent motion. Experimental method was used to validate the accuracy of the device and model simulation was performed to emphasize the importance of accurate placement of the instrument on test subjects. Application of the present apparatus to normal subjects was studied to illustrate the range of elbow motion required in performing normal activities of daily living. This device is currently used in the functional evaluation of patients with elbow and forearm problems.

This paper examined the feasibility of using different optimization criteria in inverse dynamic optimization to predict antagonistic muscle forces and joint reaction forces during isokinetic flexion/extension and isometric extension exercises of the knee. Both quadriceps and hamstrings muscle groups were included in this study. The knee joint motion included flexion/extension, varus/valgus, and internal/external rotations. Four linear, nonlinear, and physiological optimization criteria were utilized in the optimization procedure. All optimization criteria adopted in this paper were shown to be able to predict antagonistic muscle contraction during flexion and extension of the knee. The predicted muscle forces were compared in temporal patterns with EMG activities (averaged data measured from five subjects). Joint reaction forces were predicted to be similar using all optimization criteria. In comparison with previous studies, these results suggested that the kinematic information involved in the inverse dynamic optimization plays an important role in prediction of the recruitment of antagonistic muscles rather than the selection of a particular optimization criterion. Therefore, it might be concluded that a properly formulated inverse dynamic optimization procedure should describe the knee joint rotation in three orthogonal planes.

This study analyzed forces in the tibiofemoral and pa tellofemoral joints during isokinetic exercise using an analytical biomechanical model. The results show that isokinetic exercise can produce large loads on these joints, especially during extension exercises. The tibio femoral compressive force (4.0 body weight) is approx imately equal to that obtained during walking but it occurs at 55° of knee flexion. Anterior shear forces (resisting force to anterior drawer) exist during exten sion exercise at less than 40° of knee flexion, with a maximum of 0.3 body weight. Posterior shear forces (resisting force to posterior drawer) exist during exten sion exercise at knee joint angles greater than 40° and during the flexion portion of isokinetic exercise. The maximum posterior shear force is 1.7 body weight. The patellofemoral joint can encounter loads as high as 5.1 body weight which are 10 times higher than during straight leg raises. These results suggest that isokinetic exercise should be used cautiously in patients with knee lesions.

Golf is an activity generally stressful to the hands and wrists and particularly can produce increasing symp toms in players with underlying problems such as hand and wrist arthritis or tendinitis. The purpose of this study was to quantitate wrist motion and club head/ ball impact force in subjects with pathologic conditions of the hand, wrist, or forearm, within a laboratory environment. A regular straight-handled golf club was compared to a new BioCurve handle design that has a 19° ulnar bend. We measured and compared the effect of the two grips on wrist motion, club head velocity, ball impact force, ball impact location, and isometric torsional strength in 20 subjects who had a variety of upper extremity disorders. This data was then com pared to data collected in an identical fashion from golfers without such conditions. The results of our study show that there were no differences related to club handle design on impact force or impact location, club head velocity, or club head path and face angle. Wrist kinematic differences were minimal between handle designs. The differences that were significant (P < 0.05) centered around the decreased ulnar deviation of the left hand that resulted when subjects used the BioCurve handle design, which also allowed greater resistance to torque than the straight grip club. In addition to collecting objective data, we asked subjects for their opinions of the two grips. As a whole, the normal group and the group with pathologic conditions noted more comfort, improved grip, and less shock transmission with the BioCurve handle.

The purpose of this study was to investigate the rela tionship of isometric and isokinetic endurance of the forearm complex under maximum effort in a healthy population. Isometric and isokinetic endurance meas urements of elbow flexion and extension of the domi nant and nondominant sides were made in 32 healthy male subjects (age range, 21 to 39 years). Both fatigue rates and the amount of time elapsed in reaching fatigue were determined. Analysis of these data reveals that 1) isometric endurance of the forearm complex cannot be used as a predictor of isokinetic endurance, as there is no relationship between the two, 2) dominant and non dominant endurance are related, a result that supports the belief that in the assessment of the endurance of a single diseased upper extremity, the best available comparison is with the contralateral healthy extremity, and 3) healthy males in the age range tested have greater endurance in elbow extension than in flexion.

Eighteen junior elite figure skaters were filmed while performing axel and double axel jumps. These same skaters were assessed for strength of the shoulders, knees, and hips at multiple angular velocities using a Cybex II system. The height of the jumps was signifi cantly correlated with the strength data. Knee exten sion at 240 deg/sec and shoulder abduction at 300 deg/sec were shown to be the most important strength parameters in determining the height of the jump. This information may be useful for designing strength train ing programs for figure skaters.

The practice of prophylactic ankle taping or wrapping to reduce the incidence of inversion ankle sprains in athletes has come under attack. The purpose of this study was to measure objec tively one ankle taping technique's ability to withstand the stresses placed upon it by a standardized exercise routine. Electrogoniometers were used to measure the three-dimen sional ankle motion of 20 subjects walking on a level surface and a 10° sideslope. The evaluations were carried out under these three conditions: (1) both ankles untaped, (2) both ankles taped before exercises, and (3) both ankles taped after exercise. The results from this study indicate that the tape does indeed restrict those motions associated with inversion ankle sprain. Methods similar to those described in this study could be used in the evaluation of many current training room practices and thereby provide an objective rationale for their application.